Hampshire · Heat pump installation
Air Source Heat Pumps in Hillstreet
Our engineers work in Hillstreet on MCS certified installation of air source heat pumps for heating and hot water, with the Boiler Upgrade Scheme grant applied for. A look at the job first, a fixed-price quote and written records at the end.
- Choosing between air-to-water and air-to-air
- Checking whether planning permission is needed
- Working out whether radiators need upsizing
Air source heat pumps in Hillstreet
Until 31 March 2027, a heat pump installed in residential accommodation carries 0% VAT, with 5% from 1 April 2027. That follows HMRC Notice 708/6, and it does not apply to businesses. For air-to-air systems, we confirm the VAT on your quote. This is general information, not tax advice. If you’re dealing with deciding which kind of heat pump suits the home and a boiler that’s getting old, we can help.
If your home in or near Hillstreet is heated by oil, LPG or electric heaters with no mains gas, an extra £1,500 is available through the Boiler Upgrade Scheme until March 2027, on top of the £7,500.
If a fault appears while the equipment is under the manufacturer’s warranty, tell us the make, model and installation date. We will explain how the manufacturer’s terms are likely to apply before any chargeable work goes ahead.
- Location
- Hillstreet (SO40)
- Region
- Hampshire
- Costs
- £8,000–£16,000 (0% VAT on homes), before the grant
- Price
- A fixed-price quote up front
- Credentials
- F-Gas certified, NICEIC approved, MCS
- Phone
- 07833 053749
- Checked
- 30 October 2026
How the visit works
The first job on site is protection: dust sheets over floors and furniture near the work and nothing is moved without asking you. Then the electrics are made safe and the work begins. It takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes, and we clear up before we go. Pictures of the space and where the outdoor unit could go let us plan the work in Hillstreet.
- First we talk through the property and the current system.
- Every room’s heat loss is worked out on site.
- We design the system, check the radiators and cylinder and look at the outdoor unit position.
- A fixed-price quote explains the cost, the grant position and the VAT.
- Then it’s fitted, commissioned and registered with MCS.
Preparing for the visit
- Keep pets and children away from the work area
- Tell us about any building rules, permits or sign-in
- Make sure we can reach the outdoor unit, or where it will go
How to get a quote
Getting a quote is straightforward. Send a few details and photos, and we reply the same working day. If we need to see the property first, we book a survey at a time that works for you.
Advice
Pricing air source heat pumps in Hillstreet
Every job gets its own quote. These are the things that affect it:
- The brand, model and parts involved
- How many units are involved
- The pipe route between the units
Typical ranges are on our prices page, but your price depends on the job in front of us. Call for a fixed-price quote, and we’ll explain what it covers.
What we need to know
When you call or email, it’s useful to have:
- The fuse board and where it is in the property
- The outside wall, roof or yard where the outdoor unit sits or would go
- The make and model of the system, from the label
To get a fixed-price quote, call 07833 053749 or send an email and tell us about the property and what you need. A few photos make it quicker. We reply to enquiries the same working day.
Towns and villages near Hillstreet
Other services in Hillstreet
Why deal with it now?
Radiators that are too small for a heat pump’s lower flow temperature leave rooms cool. Checking and upsizing them as part of the installation avoids that. For a village like Hillstreet, booking ahead lets us plan the trip properly.
One room or a whole building, we price it on the same basis: the work involved, the access and the equipment. You’ll have a fixed price before any work starts, and the quote sets out the VAT.
Why choose AirCon Doctor in Hillstreet
- One contact for properties across the South East and London
- Leading brands including Daikin, Mitsubishi Electric and Fujitsu
- Emergency calls taken 24/7
- NICEIC approved electrical contractors
Read our cost guide and our accreditations.
Questions from Hillstreet
Does being near the sea make a difference to air source heat pumps in Hillstreet?
It can, as Hillstreet is within about 3 miles of the sea, where salt in the air is hard on coils and fixings. We site outdoor units out of the worst of the sea wind where possible and can suggest models with corrosion protection where the manufacturer offers it.
Will you come out to Hillstreet?
Yes, and the size of the place makes no difference to how we work. We are based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Can I do the refrigerant work myself?
No, not the refrigerant side. The F-gas rules require certified companies and qualified engineers for it, and a new electrical circuit is notifiable building work unless a registered competent person does it.
Do you have a 24/7 line?
Yes. There’s a 24/7 emergency line for breakdowns that can’t wait. Call 07833 053749 and tell us what’s happened.
Does servicing affect my warranty?
Each manufacturer decides. Where servicing is a condition, a missed service could give the manufacturer grounds to refuse a claim and we will tell you what your brand asks for.
What does F-Gas certified mean?
The law says any company working on equipment containing F gas has to be certified, and each engineer needs the right qualifications too. It’s how you know the refrigerant is being handled legally and safely.
When will I hear back?
On the same working day you contact us. Then we agree a date that works for you, with a fixed price before work starts.
What owners can safely do
There are a few things you can safely do yourself: keeping the outdoor unit clear, checking the mode and set temperature, and the routine cleaning in the manual. Anything inside the units, the electrics and the refrigerant is engineer’s work.
Refrigerant is off limits for anyone without the right qualifications. The law requires anyone working on equipment containing F gas to hold the right qualifications, and the company to be certified, and refrigerant lines can cause cold burns. If you suspect a leak, switch the system off and call us.
What a heat pump looks like in Hillstreet
Hillstreet lies within about 3 miles of the sea. Near the coast, we choose the outdoor unit position with salt-laden wind in mind. About 3 listed entries lie within half a mile of central Hillstreet, The Thatched Cottage (grade II) among them. That affects heat pumps: listed buildings need consent, and conservation areas limit where the outdoor unit can go under permitted development. Where needed, we check with the local planning authority (usually New Forest council). VOA council tax data date about 40% of homes in the Hillstreet area to the post-war years, 1945 to 1972, and about 38% of households live in terraced houses, according to the 2021 Census. Whether the walls and loft have been insulated makes a real difference to the heat pump size for homes of that period. Terraced houses share walls with neighbours, which helps, but the outdoor unit position needs care with noise next door.
Live in one of the older houses around St Anne's? Expect the survey to look closely at heat loss and at the building’s planning status. Every heat pump design starts with a room-by-room heat loss calculation.
Hillstreet is about 2 miles north of Totton, in Hampshire. Our engineers cover Hillstreet for air source heat pumps, along with the rest of Hampshire. 683 places in Hampshire are on our list, from busy centres to quieter spots. Our Guildford page covers places nearby, about 46 miles away.
If your postcode is in SO40, we can take the job on. If you’re just outside Hillstreet, we cover Ower (1 mile west), Wigley (1 mile north-west), Totton (2 miles south), Winsor (2 miles south-west) and Netley Marsh (2 miles south). Further out, we also cover Winchester (12 miles north-east), Eastleigh (8 miles east), Fareham (15 miles south-east) and Chandler's Ford (6 miles north-east).
What’s near Hillstreet
The nearest railway station is Totton station, about 2.3 miles south-east of the centre. Well-known places in the area include Tatchbury Mount Hospital (1.1 miles south-west) and Eling Experience (2 miles south-east). For a walk, there’s Testwood Lakes.
From one of our customers
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead