Isle of Wight · Heat pump installation
Havenstreet air source heat pumps
Looking for air source heat pumps in Havenstreet? We look at the job first, give you a fixed-price quote and do the work at a time that suits you, finishing with proper records.
- Working out where a cylinder could go
- Moving away from fossil-fuel heating
- Choosing between air-to-water and air-to-air
About our air source heat pumps in Havenstreet
Heat pumps run at lower flow temperatures than most boilers which means some radiators may need upsizing. The survey shows which rooms are fine and which need changes and anything that needs changing is in the quote. The work covers underfloor heating, hot water cylinders and air-to-air heat pumps, and common reasons people get in touch are questions about where the outdoor unit can go and no space for a hot water cylinder.
If your home in or near Havenstreet is heated by oil, LPG or electric heaters with no mains gas, an extra £1,500 is available through the Boiler Upgrade Scheme until March 2027, on top of the £7,500.
Some warranty terms depend on the system being serviced regularly by a qualified engineer. Where yours does, a regular service with us keeps that side in order and each visit is recorded.
- Place
- Havenstreet (PO33)
- Region
- Isle of Wight
- Quote
- Fixed-price quote after a site survey
- Approvals
- F-Gas certified company, NICEIC approved, MCS
- Enquiries
- On the working day you ask
- Prices
- £8,000–£16,000 before the grant, 0% VAT on homes
- Telephone
- 07833 053749
- Reviewed
- 30 October 2026
Your questions about air source heat pumps in Havenstreet
Can I get the Boiler Upgrade Scheme grant in Havenstreet?
Yes, the scheme covers homes in England, including Havenstreet, if they qualify. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. You don’t apply yourself: the MCS certified installer does, which is us.
Do you cover smaller places like Havenstreet?
We do. Villages and hamlets get the same service as the bigger towns. Send a few details and photos, and we reply the same working day.
Do you offer emergency call-outs?
Yes. If something urgent happens, like water coming from a unit or a critical room overheating, call our 24/7 line and we’ll tell you what to do first.
How does the warranty work?
It’s the manufacturer’s, and the terms are theirs. Some terms depend on regular servicing by a qualified engineer, so keep your service records.
How do you keep the place clean during the work?
We start with protection: sheets over the floor and nearby furniture. Any drilling is agreed with you first, and we clear up the dust and offcuts before we leave.
Can I do any of the installation myself?
No, not the refrigerant side. Under the F-gas rules, it must be done by qualified engineers from a certified company, and a new electrical circuit is notifiable building work unless a registered competent person does it.
Why does F-Gas certification matter?
The law says any company working on equipment containing F gas has to be certified, and the engineers need their own qualifications. It means the refrigerant in your system is handled legally.
Why deal with it now?
Planning rules have specific conditions. We look at the planning position early, so there are no surprises covering listed buildings, conservation areas and any Article 4 direction. A system that’s left with a fault, or without a service, typically costs more to run.
Every job is different, so we price each one individually. The system, the access, the pipe routes and the parts involved all make a difference.
Why book with us
- Fixed-price quotes after a survey or pictures
- A 24/7 emergency line
- Clear warranty information from the manufacturer
- Members of Checkatrade
Read how installs are priced or our accreditations and certificates.
Homes in Havenstreet and heat pumps
The coast is only about 3 miles from Havenstreet. Coastal sites are worth mentioning at the survey, as salt air affects the outdoor unit and its fixings. About 79% of households live in detached or semi-detached houses, according to the 2021 Census. Houses normally have space for an outdoor unit and a hot water cylinder. The centre of Havenstreet lies within a conservation area. Historic England lists about 6 buildings and structures within half a mile of the centre of Havenstreet, including Church of St Peter (grade II). That affects heat pumps: listed buildings need consent, and conservation areas limit where the outdoor unit can go under permitted development. Where needed, we check with the planning team at Isle of Wight council, which usually handles Havenstreet.
Live in one of the older houses around St. Peter's Church? Expect the survey to look closely at heat loss and at the building’s planning status. Historic houses such as Nunwell House, about 2.8 miles south-east, are a reminder that listed homes need consent before a heat pump goes in.
Havenstreet is about 2 miles south-west of Ryde, in the Isle of Wight. If you need air source heat pumps in Havenstreet, please call 07833 053749 or email us for a fixed-price quote. Our area covers London and the South East, Havenstreet included. In the Isle of Wight alone we list 125 places and Havenstreet is among them. For properties nearby, see our Worthing page, about 36 miles away.
From Church Road, Elizabeth Gardens and Church Lane to the smaller roads in between, the whole area is covered. Our working area takes in PO33 in full. Neighbouring places we cover include Fishbourne (1 mile north), Wootton (2 miles north-west), Hillgrove (2 miles west), Staplers (3 miles west) and Fairlee (3 miles west). Within a short drive, we also cover Newport (4 miles west), Cowes (6 miles north-west), Sandown (4 miles south-east) and Shanklin (6 miles south). Remote and island properties need a little more planning, so tell us where you are when you ask for a quote for air source heat pumps.
What’s near Havenstreet
Locally, jobs take us to houses, flats and workplaces close to White Hart Inn and the streets around them. The closest station to Havenstreet is Smallbrook Junction station, roughly 2.2 miles east. Well-known places in the area include The Donald Mcgill Museum (2.4 miles north-east) and Sandown Castle (4.4 miles south-east). For a walk, there’s Briddlesford Nature Reserve and Brading Down.
Also near Havenstreet
Other services in Havenstreet
How it works
If the system has to be off for part of the visit, we tell you before any work starts, so you can plan around it. For businesses, we can normally work room by room or zone by zone. The work takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. If a lane or gateway near Havenstreet is tight for a van, let us know and we will plan for it.
- First we find out about the property, the heating you have now and what you’re hoping for.
- A heat loss survey works out how much heat each room needs, and we look at the radiators, the cylinder space and where the outdoor unit could go.
- We send a fixed-price quote that shows the equipment, the grant position and the VAT.
- We fit the outdoor unit and connect it to the heating, hot water and controls.
- Once it’s running correctly, the MCS certificate is issued and we show you the settings.
Before we arrive
- Arrange for someone to be there to let us in
- Mention any roof access, ladders or high-level work
- Find the manual or the paperwork for the system, if you have it
Getting a price
Published ranges are a starting point; the quote is built on your property, because every property is different. Once we’ve looked at the job, from pictures or on a survey, you get a fixed price. To start, call us on 07833 053749.
Read more
Honest limits
In fairness, some problems need a different answer:
- Disconnecting or servicing a gas boiler
- Insulation work, such as loft or cavity wall insulation
- Planning decisions, which rest with the council
If you’re not sure, just call 07833 053749 and we’ll give you a straight answer before booking.
What the work covers
- Underfloor heating
- Homes heated by oil, LPG or gas
- Hot water cylinders
- Radiator systems
- Air-to-water heat pumps
- Air-to-air heat pumps
How we price air source heat pumps
The survey or diagnosis tells us what the work involves. The main factors are:
- Whether the existing supply is suitable
- The brand, model and parts involved
- One-off work versus a regular service cycle
Our prices page shows typical ranges, but your price depends on the job in front of us. For a fixed-price quote, ring 07833 053749 or send an email, and we’ll talk you through it.
What to send for a quote
Photos and a few facts are often enough to price a simple job. Useful things to send:
- Any error code or flashing light on the display
- Any previous service or F-Gas records
- The make and model of the system, from the label
Every quote starts with a look at the job, from a site survey or, where the job is straightforward, from photos and measurements. Then you get a fixed price so you know the cost before we begin.
From one of our customers
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath