Greater London · Heat pump installation
Heat pump installers in Hatton
Our engineers work in Hatton on air source heat pumps. A look at the job first, a fixed-price quote and written records at the end.
- Questions about where the outdoor unit can go
- No space for a hot water cylinder
- Plans to switch to electric heating with a heat pump
Pricing air source heat pumps in Hatton
Some jobs are bigger than they look, and some smaller. What affects the quote:
- The condition of any existing system
- A single visit or a regular plan
- Whether we need access equipment for high-level work
Typical ranges are on our prices page, but each job is priced on what it involves. Call for a fixed-price quote, and we will explain what it covers.
What to send for a quote
What to send for a quote:
- The postcode and whether it’s a home, flat or business
- The make and model of the system, from the label
- Your consumer unit or fuse board
Quotes don’t take long. Call or email with a few details and we will come back to you the same working day. If we need to see the property first, we book a survey at a time that works for you.
Air source heat pumps in Hatton
Air-to-air heat pumps can qualify for a £2,500 Boiler Upgrade Scheme grant, but only in some cases. It has to replace the fossil-fuel heating, cover the whole heating demand, be fitted by an MCS certified installer and be in a home; adding it alongside a boiler does not qualify. If you are dealing with radiators that may be too small for a heat pump and a boiler that’s getting old, we can help.
In a flat in Hatton, the lease and the freeholder usually decide where a heat pump can go. Permitted development limits are different for flats, and we check before designing.
Think of the paperwork as the system’s health record: what was fitted or found, what was done and when. If anything goes wrong later, it helps the next engineer and the manufacturer and it’s worth keeping safe.
- Location
- Hatton (TW14, TW6, TW4)
- Region
- Greater London
- Quotes
- Fixed-price quote after a site survey
- Certified
- F-Gas certified, NICEIC approved, MCS
- Costs
- £8,000–£16,000 (0% VAT on homes), before the grant
- Call
- 07833 053749
- Checked
- 30 October 2026
Hatton questions
Can you do air source heat pumps in Hatton?
Yes, Hatton is within the area we cover. Tell us a little about the job and we will take it from there.
Is the heat pump grant available in Hatton?
Yes, the scheme covers homes in England, including Hatton, if they qualify. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. We hold MCS certification, so the application is ours to make for you.
Will you work on another installer’s system?
Yes. We start with a proper look and tell you honestly what we find, including anything about the original installation that needs putting right. You get a fixed price before any work goes ahead.
Do you work on commercial properties?
Yes. From a single let flat to offices, shops and public buildings, the approach is the same: survey or diagnosis, a fixed price and proper paperwork.
How does the warranty work?
Warranty is the manufacturer’s own, on its terms. Each brand sets its own conditions and periods, so we explain them on your quote.
How long will it take to install a heat pump?
It takes from a couple of days to around a week, depending on the system and how much of the heating changes. The cylinder, the radiators and the pipework make the biggest difference, and we confirm the timing with your quote.
How much does an air source heat pump cost?
Air-to-water systems are £8,000–£16,000 (0% VAT on homes), before any grant. Your price depends on the survey, the emitters and the hot water and the quote is fixed.
Air source heat pumps in Hatton: the local picture
About 40% of homes in Hatton and the neighbourhoods around it were built between the wars, according to the Valuation Office Agency’s council tax figures. Whether the walls and loft have been insulated makes a real difference to the heat pump size for homes of that period. In London, outside space and the rules for flats often decide which kind of heat pump suits.
If your home is one of the older properties near The Parish Church of the Good Shepherd, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen. Historic houses such as Osterley House, about 3.4 miles north-east, are a reminder that listed homes need consent before a heat pump goes in.
Hatton is about 1 mile north of Feltham, in Greater London. From the centre of Hatton to the outskirts, our engineers cover air source heat pumps, from a single room to a whole building. Our list for Greater London has 764 entries and Hatton is among them. London, roughly 14 miles off, has its own page on this site.
Our nearest recent job to Hatton was on King Street, Twickenham (TW1), about 4 miles east: installing a Samsung VRF system serving the restaurant dining area, bar, private dining room and kitchen extraction area: seven indoor units in total.
Every address in TW14, TW6 and TW4 is within our area, from busy streets to back roads. You’ll find Hatton on the A30, so it’s easy for us to get to for surveys and visits. We also cover Cranford (1 mile north-east), Heathrow (1 mile west), Harlington (1 mile north-west), Bedfont (1 mile south-west) and Feltham (1 mile south). Larger places within reach include London (14 miles east), City of Westminster (12 miles east), Marylebone (12 miles east) and Kensington (10 miles east).
Landmarks near Hatton
In Hatton, that means homes and buildings near Green Man Public House, Hounslow Heath and Rivers Academy West London, among other places. Hatton’s nearest station is Heathrow Terminal 4 Rail station, about 1.2 miles south-west of the centre. A little further out are Treaty Centre (2.5 miles east) and Harlington (1.9 miles north-west). Open spaces near Hatton include Staines Reservoirs and Crane Meadows.
What we do, step by step
Our engineers bring the tools, gauges and access equipment the job needs. All we ask is clear access to the units, or to where they’ll go, and to the consumer unit. The visit takes a few days on site, depending on the cylinder, the radiators and the pipework involved. Send us a few phone pictures and we can often price a straightforward job in Hatton before visiting.
- First we talk through the property and the current system.
- Every room’s heat loss is worked out on site.
- The design covers the heat pump, emitters, hot water and outdoor unit.
- Cost, grant and VAT appear on one fixed-price quote.
- Then it’s fitted, commissioned and registered with MCS.
Getting ready for the visit
- Give us access to the outside wall, roof or yard where the outdoor unit sits
- Make sure someone can let us in at the agreed time
- Move furniture away from the wall where we’ll be working
Get a fixed-price quote
To help us quote: where the property is and what kind of building it is, a few photos, the brand and model of anything already fitted and anything you’ve noticed, such as an error code or a noise. Then ring us on 07833 053749 or use the quote form.
Read more
After we have gone
Think of this as the after-treatment advice, short and simple:
- Avoid switching the heat pump on and off often
- Seal draughts where you can
- Keep to regular servicing
Equipment warranties come from the manufacturer. We explain the terms for your brand, including any servicing conditions.
Heat pumps prefer steady, low-temperature running, using the settings agreed at handover.
Towns and villages near Hatton
Other services in Hatton
Before you call an engineer
Owner care supports servicing; it doesn’t replace it. Simple care keeps the air moving through the system, but the inside of the units, the refrigerant and the electrics still need a qualified engineer.
Write down what you notice: an error code, a new noise, a drip, a smell or a change in how well the system heats or cools. It makes our diagnosis quicker, and a photo of the display helps even more.
What a customer said
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath