Oxfordshire · Heat pump installation

Heat pump installation in Dry Sandford, Oxfordshire

Need air source heat pumps in Dry Sandford? We look at the job first, give you a fixed-price quote and do the work at a time that suits you, finishing with proper records.

  • Replacing a combi boiler with a heat pump
  • Checking whether planning permission is needed
  • Checking emitters for a heat pump

Air source heat pumps for Dry Sandford

How it works

Where something has to be switched off during the work, we agree it with you first so it doesn’t catch you out. In a business, work can often be done one area at a time. The work takes a few days on site, depending on the cylinder, the radiators and the pipework involved. Photos of the room and the outside of the property help us plan a visit to Dry Sandford.

  1. We find out about your home and the heating you have now.
  2. A heat loss survey is carried out, room by room.
  3. We design the system, check the radiators and cylinder and look at the outdoor unit position.
  4. Cost, grant and VAT appear on one fixed-price quote.
  5. We install, commission and register the system under MCS.

Preparing for the visit

  • Plan for pets to be kept clear during the visit
  • Have the make and model of any existing unit to hand
  • Name a contact who can meet us at the agreed time

How to get a quote

Quoting starts with a diagnosis, either on a site survey or, for simple jobs, from your pictures and details. Then you get a fixed price before any work starts.

Get a quick quote

Advice

Air source heat pumps in Dry Sandford, done properly

Heat pumps run at lower flow temperatures than most boilers which means some radiators may need upsizing. We check each radiator against the room’s heat loss and anything that needs changing is in the quote. The work covers radiator systems, air-to-water heat pumps and homes heated by oil, LPG or gas, and common reasons people get in touch are deciding on the outdoor unit position and choosing between air-to-water and air-to-air.

Space for an outdoor unit is rarely an issue near Dry Sandford, so the design comes down to heat loss, radiators and hot water.

The records are your system’s health record: a dated account of the work and the readings we took. If anything goes wrong later, it helps the next engineer and the manufacturer, so keep it safe.

Location
Dry Sandford (OX13)
Wider area
Oxfordshire
Certified
NICEIC approved, F-Gas certified, MCS
Quotes
A fixed-price quote up front
Guide price
Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
Telephone
07833 053749
Page updated
30 October 2026

Safe owner checks

Refrigerant is off limits for anyone without the right qualifications. The law requires anyone working on equipment containing F gas to hold the right qualifications, and the company to be certified, and refrigerant lines can cause cold burns. A suspected leak is our job, not yours.

Good habits make our visits easier, not unnecessary. Simple care keeps the air moving through the system, but the inside of the units, the refrigerant and the electrics still need a qualified engineer.

Air source heat pumps around Dry Sandford

About 75% of households live in detached or semi-detached houses, according to the 2021 Census. Houses normally have space for an outdoor unit and a hot water cylinder.

If your home is one of the older properties near Church of St Helen, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen. Historic houses such as Appleton Manor, about 1.7 miles north-west, are a reminder that listed homes need consent before a heat pump goes in.

Dry Sandford is about 2 miles north-west of Abingdon-on-Thames, in Oxfordshire. Properties in Dry Sandford get the same service as everywhere we cover: diagnosis first, a fixed price and proper paperwork when we have finished. Dry Sandford is one of 443 places in Oxfordshire where we work for homes and businesses. The nearest of our city pages is Guildford, around 45 miles from Dry Sandford.

Work in OX13 follows the same survey, fixed-price quote and written records as everywhere else we cover. Places around Dry Sandford that are also on our list: Cothill (1 mile south-west), Shippon (2 miles south-east), Frilford Heath (2 miles south-west), Tubney (2 miles south-west) and Marcham (2 miles south). We also work in nearby towns such as Oxford (5 miles north-east), Didcot (7 miles south-east), Witney (9 miles north-west) and Carterton (12 miles west).

Landmarks near Dry Sandford

In Dry Sandford, that means homes and buildings near Merry Miller pub and Larkmead School, among other places. Dry Sandford’s nearest station is Radley station, roughly 3.8 miles east. Other landmarks nearby include FitzHarris Castle (2.5 miles south-east) and Abingdon Community Hospital (2.3 miles south-east). Green spaces nearby include Parsonage Moor and Cumnor Hill.

Map of Dry Sandford © OpenStreetMap contributors

What happens if it’s left?

Radiators that are too small for a heat pump’s lower flow temperature leave rooms cool. Checking and upsizing them as part of the installation avoids that. A system that’s left with a fault, or without a service, usually costs more to run.

Several rooms, units or sites on one quote often makes better use of the time. Mention every unit or room you need covered, and you will get one fixed price.

What you get with us

  • Every job looked at before it’s priced
  • A 24/7 emergency line
  • MCS certified for heat pumps
  • A fixed price before any work starts

Read our cost guide and our accreditations and certificates.

Pricing air source heat pumps in Dry Sandford

Typical ranges are on our prices page, and your quote is built on your job. What we look at:

  • Whether it’s a simple split or a larger system
  • A single visit or a regular plan
  • The number of rooms, units or zones

No two properties are the same, so we price each one individually. The system, the access, the pipe routes and the parts involved all make a difference.

Asking for a quote

A few details help us quote accurately. With your enquiry, please include:

  • Where the outdoor unit is, or where you’d like it
  • Your consumer unit or fuse board
  • The make and model of the system, from the label

Here’s what helps us quote: the address and the type of property, pictures of the rooms or units, the make and model of any existing system and anything you’ve noticed, such as an error code or a noise. Then ring 07833 053749.

Your questions about air source heat pumps in Dry Sandford

Can I fit a heat pump in Dry Sandford without planning permission?

The answer turns on the property and where the outdoor unit would sit. Around 8 listed entries sit within 0.5 miles of central Dry Sandford. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with Vale of White Horse council, which is typically the planning authority for Dry Sandford.

Do you cover smaller places like Dry Sandford?

Yes, and the size of the place makes no difference to how we work. Visits to smaller places are planned so the engineer arrives with what the job needs.

Do I need new radiators for a heat pump?

The heat loss survey answers that, room by room. Where a radiator is already large enough, it stays, and any that need upsizing are set out in the quote.

Can we book visits on a schedule?

Yes. Maintenance contracts are part of what we do, with visits at the interval your system and the manufacturer need. Each visit is written up, with F-Gas records where refrigerant work is involved.

Is there VAT on a heat pump?

For homes, currently none: until 31 March 2027 the rate is 0% in residential accommodation, then 5%. The relief is not available to businesses, and for air-to-air systems we confirm the VAT on your quote. This is general information, not tax advice.

What warranty do I get?

Warranty is the manufacturer’s own, on its terms. Each brand sets its own conditions and periods, so we explain them on your quote.

Why use an F-Gas certified company?

For refrigerant work, both the engineer and the company need the right F-gas credentials. Ask to see proof before booking anyone, and we’re happy to show ours.

From one of our customers

“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”

Sarah M., East Grinstead

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead