Surrey · Heat pump installation
Air Source Heat Pumps in Deepcut
For heat pump installation in Deepcut, one call is all it takes: diagnosis, fixed price, work and sign-off. An F-Gas certified company, NICEIC approved, on Checkatrade.
- Choosing between air-to-water and air-to-air
- A boiler that is getting old
- Checking eligibility for a heat pump grant
Questions from Deepcut
Do you cover Deepcut for air source heat pumps?
Yes, Deepcut is within the area we cover. To start, phone 07833 053749 or drop us a line with a few pictures.
Is the heat pump grant available in Deepcut?
Deepcut is in England, where the Boiler Upgrade Scheme runs. Whether your home qualifies, and for how much, depends on the type of heat pump and the heating it replaces. The installer applies, and we’re MCS certified.
Can I fit air conditioning or a heat pump myself?
No, not the refrigerant side. The F-gas rules require certified companies and qualified engineers for it, and a new circuit is notifiable under Part P unless a registered electrician, such as a NICEIC approved contractor, does it.
Do you offer maintenance contracts?
Yes. Maintenance contracts are part of what we do, with visits at the interval your system and the manufacturer need. Each visit is recorded and F-Gas records kept where they apply.
What’s the difference between air-to-water and air-to-air heat pumps?
The right choice depends on the property and what you need. The grant is £7,500 for eligible air-to-water systems and £2,500 for air-to-air in limited cases, and we set out the options after the survey.
Do you offer emergency call-outs?
Yes. There’s a 24/7 emergency line for problems that cannot wait for a planned visit. Ring 07833 053749 any time and explain the problem.
Which manufacturers do you install and repair?
Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries, Hitachi and others. For new systems, we recommend a brand and model to suit the job and tell you why.
Air source heat pumps for homes and businesses in Deepcut
Air-to-air heat pumps can qualify for a £2,500 Boiler Upgrade Scheme grant, but only in some cases. It has to replace the fossil-fuel heating, cover the whole heating demand, be fitted by an MCS certified installer and be in a home, so an add-on next to a boiler is not eligible. Typical jobs include choosing between air-to-water and air-to-air and questions about where the outdoor unit can go, on air-to-water heat pumps, hot water cylinders and radiator systems.
If your home near Deepcut has no mains gas, the grant can be bigger. Until March 2027, homes on oil or LPG without mains gas can get an extra £1,500 through the Boiler Upgrade Scheme, for an air source or ground source heat pump.
Warranty on the equipment is the manufacturer’s own, on the manufacturer’s terms, and we explain those terms on your quote. Each brand sets its own conditions, so we go through them with you rather than leave you to find the small print.
- Location
- Deepcut (GU16)
- Wider area
- Surrey
- Price
- Fixed-price quote after a site survey
- Costs
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Replies
- Answered the same working day
- Certified
- F-Gas certified company, NICEIC approved, MCS
- Call
- 07833 053749
- Updated
- 30 October 2026
Other services in Deepcut
Heat pumps in Deepcut: local notes
About 77% of households live in detached or semi-detached houses, according to Census 2021 figures. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these. In the mile around Deepcut’s centre, 2 conservation areas have been designated. So the heat pump survey asks two extra questions here: is the home listed, and is it inside a conservation area?
Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler. The installer applies for the Boiler Upgrade Scheme grant, and we’re MCS certified.
Deepcut is about 1 mile east of Frimley, in Surrey. Wherever you are in the GU16 postcode area, we cover air source heat pumps. Count every place we list in Surrey and you reach 395, with Deepcut on the list. Our Guildford page covers places nearby, about 7 miles away.
The closest recent job we can point to from Deepcut was on Princess Way, Camberley (GU15), about 2 miles north-west: installing a Samsung VRF system serving twelve rooms across two floors, including open-plan working areas, individual offices, a server room and a boardroom.
From Deepcut Bridge Road, The Royal Way and Newfoundland Road to the smaller roads in between, the whole area is covered. Here we cover the GU16 postcode area. We also cover the places around Deepcut: Frimley (1 mile west), Frimley Green (1 mile south-west), Camberley (2 miles north-west), Watchmoor (3 miles west) and Old Dean (3 miles north). We also work in nearby towns such as Guildford (7 miles south-east), Woking (6 miles east), Farnham (8 miles south-west) and Egham (11 miles north-east).
Landmarks near Deepcut
Locally, jobs take us to houses, flats and workplaces close to Frimley Lodge Park, Tomlinscote School and Tomlinscote School and the streets around them. For rail, the closest station is Farnborough North station, about 1.9 miles west. Nearby you’ll also find Frimley Park Hospital (1.9 miles west) and The Museum of The National Rifle Association (2 miles east). Green spaces nearby include Danger Hill and Ash Ranges.
What happens on the day
We keep the work area tidy as we go, with dust sheets down and offcuts and packaging cleared up. Any holes, fixings or cable routes are agreed with you before we drill. The visit takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. In a place like Deepcut, parking is rarely an issue, but tell us about gates and access to the back of the property.
- It begins with your house and the heating it relies on now.
- A heat loss survey is carried out, room by room.
- From those figures we size the heat pump and decide on radiators, cylinder and outdoor position.
- A fixed-price quote explains the cost, the grant position and the VAT.
- Then it’s fitted, commissioned and registered with MCS.
Before we arrive
- Let us know where the consumer unit is
- Move furniture away from the wall where we will be working
- Tell us about any building rules, permits or sign-in
How to get a quote
Quoting starts with a diagnosis, either on a site survey or, for simple jobs, from your photos and details. After that, we send a fixed price so you know the cost before we begin.
Read more
Rented and managed buildings
Keeping records across a portfolio is half the battle. Each visit produces a dated record, plus the F-Gas records where refrigerant is involved, so you can show what was done and when.
Under the GB F-gas rules, responsibility for leak checks is shared between whoever operates the equipment and the engineers who work on it. Where a building is let or managed, the lease or contract should make clear who looks after the system, and we can work for either side.
After we’ve gone
A little care keeps the system in better shape. Our advice:
- File the MCS certificate safely
- Diary the next service
- Keep up with insulation and draught-proofing
Now and then in cold weather, the outdoor unit defrosts itself. You might see steam or hear the unit change note, and that’s normal.
Heat pumps prefer steady, low-temperature running as explained at handover.
When it’s something else
Before you book, it helps to know what’s not included:
- Planning decisions, which rest with the council
- Tax rulings, which only HMRC can give
- A grant for a home that does not meet the scheme rules
If in doubt, phone us on 07833 053749 or email us and we’ll say what we think.
What we work on in Deepcut
- Underfloor heating
- Air-to-air heat pumps
- Radiator systems
- Hot water cylinders
- Homes heated by oil, LPG or gas
- Air-to-water heat pumps
What a customer said
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead