Kent · Heat pump installation
Air Source Heat Pumps in Curteis' Corner
Looking for air source heat pumps in Curteis' Corner? We look at the job first, give you a fixed-price quote and do the work at a time that suits you, finishing with proper records.
- Checking emitters for a heat pump
- Deciding which kind of heat pump suits the home
- Not knowing whether a grant applies
Air source heat pumps in Curteis' Corner
We install air source heat pumps in Curteis' Corner and across Kent, and we’re MCS certified. Air-to-water systems feed your radiators or underfloor heating and hot water cylinder, while air-to-air systems heat rooms directly through indoor units and can cool them too. We help you work out which suits your home. Common call-outs are for radiators that may be too small for a heat pump and plans to switch to electric heating with a heat pump, across air-to-air heat pumps, radiator systems and hot water cylinders.
Older and listed homes in villages like Curteis' Corner need extra care, and permitted development doesn’t cover listed buildings, so consent comes first.
Equipment warranty comes from the manufacturer, on its own terms, and we explain those terms on your quote. Terms differ from brand to brand, so we go through them with you rather than leave you to find the small print.
- Where
- Curteis' Corner (TN27)
- Region
- Kent
- Pricing
- Fixed after a survey or photos
- Replies
- On the working day you ask
- Price guide
- £8,000–£16,000 (0% VAT on homes), before the grant
- Credentials
- NICEIC and F-Gas, MCS
- Telephone
- 07833 053749
- Last updated
- 30 October 2026
Looking after it afterwards
Aftercare is straightforward, and it helps at the next service:
- Seal draughts where you can
- Ask about the grant before you commit
- Diary the next service
Once commissioned, we register the installation with MCS and give you the certificate. Keep it with the manufacturer’s paperwork for future reference.
Keep insulation and draught-proofing in good order because it reduces the heat the system needs to supply.
When to call us in Curteis' Corner
Some homes heated by electric heaters or storage heaters consider a heat pump instead. The survey tells you whether it’s practical and what’s involved along with whether any grant could apply.
Keep an eye out for any of the following:
- Checking emitters for a heat pump
- Questions about listed buildings or conservation areas
- Comparing heat pump types
Older homes near Parish Church of All Saints may need extra checks for planning and heat loss before a heat pump is designed.
What your quote should include
- If the quote is based on a survey, photos or a diagnosis
- What’s in the price and what isn’t
- What paperwork you will receive afterwards
Before you call an engineer
Refrigerant is off limits for anyone without the right qualifications. The law requires anyone working on equipment containing F gas to hold the right qualifications, and the company to be certified, and refrigerant lines can cause cold burns. A suspected leak is our job, not yours.
Before you call us about a fault, a few checks can save a visit: check the mode, the set temperature, the remote’s batteries and the breaker. If the breaker trips a second time, leave it off and phone 07833 053749 or email us.
How the visit works
Testing is the last part of the visit wherever the system can be switched on. Then we explain what was done and answer your questions, and anything that needs attention later is pointed out. All told, the work takes a few days for most air-to-water installations, with air-to-air systems often quicker. Photos of the existing unit help with repairs and servicing in Curteis' Corner.
- We start with your plans and the property.
- We survey for heat loss and look at radiators, cylinder space and outdoor unit options.
- We recommend air-to-water or air-to-air and check the grant position.
- We install the heat pump and connect it up.
- The job ends with commissioning, the MCS certificate and a walk through the controls.
How to prepare
- Let us know if the units are on a roof, a high wall or in a locked area
- Clear the space around the indoor unit, or where it will go
- Mention any managing agent or landlord rules we need to follow
Getting a price
To get a fixed-price quote, phone 07833 053749 and tell us about the property and what you need. A few pictures make it quicker. You will hear back from us the same working day.
Read more
Nearby places to Curteis' Corner
Other services in Curteis' Corner
Homes in Curteis' Corner and heat pumps
The 2021 Census found about 75% of households in detached or semi-detached houses. Houses normally have space for an outdoor unit and a hot water cylinder.
Every heat pump design starts with a room-by-room heat loss calculation.
Curteis' Corner is about 10 miles west of Ashford, in Kent. Whatever kind of property you have in Curteis' Corner, our engineers can help with air source heat pumps. We reply to enquiries the same working day and our emergency line runs 24/7. Count every place we list in Kent and you reach 922, with Curteis' Corner on the list. For properties nearby, see our Eastbourne page (28 miles or so).
Our nearest recent job to Curteis' Corner was on Mermaid Street, Rye (TN31), about 13 miles south: installing three Fujitsu wall-mounted units in guest bedrooms, with the outdoor units positioned in the hotel’s walled rear garden.
Local streets include Headcorn Road, Smarden Road and Cot Lane, each of them within reach. All of TN27 is covered, from busy streets to back roads. Close to Curteis' Corner, our area also takes in Standen (1 mile north-east), Biddenden (1 mile south-west), Lashenden (1 mile north), Stede Quarter (1 mile south-east) and Hareplain (1 mile west). Within a short drive, we also cover Maidstone (11 miles north-west), Ashford (10 miles east), Kings Hill (15 miles north-west) and Foley Park (12 miles north-west).
Local landmarks in Curteis' Corner
Around Curteis' Corner, our work takes us to homes and businesses near The Red Lion Inn. The closest station to Curteis' Corner is Headcorn station, about 2.9 miles north. A little further out are Sissinghurst Castle (3 miles west) and Benenden Hospital (3 miles south-west).
Curteis' Corner: your questions answered
Is Curteis' Corner within the area you cover?
We do. Villages and hamlets get the same service as the bigger towns. A few pictures and the postcode are enough to get things started.
Can I fit a heat pump in Curteis' Corner without planning permission?
There’s no single answer: the building and the outdoor unit position decide it. A conservation area takes in the middle of Curteis' Corner. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with the planning department at Ashford council, usually the authority for Curteis' Corner.
Can you look at a system you didn’t fit?
Yes. We look at it first and tell you what we find, including anything about the original installation that needs putting right. Any work is priced before it goes ahead.
What accreditations do you have?
We’re an F-Gas certified company, with NICEIC approval for electrical work and MCS certification for heat pumps. We’re also Checkatrade members.
Can you come out in an emergency?
Yes. Our emergency line runs 24/7 for problems that can’t wait for a planned visit. Call 07833 053749 and tell us what’s happened.
Will I get records for the system?
Yes. It’s the record a manufacturer or the next engineer will ask to see: the date, the work, and any refrigerant added or recovered.
What does F-Gas certified mean?
Anyone installing, repairing or servicing the refrigerant side must be qualified, and their company certified. It’s worth checking before you book, and we are happy to show ours.
A customer’s words
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead