West Sussex · Heat pump installation
Heat pump installers in Cowfold
Air source heat pumps across Cowfold and nearby, from the first look to the final check with the price fixed before work begins.
- Comparing heat pump types
- Not knowing whether a grant applies
- Plans to switch to electric heating with a heat pump
About our air source heat pumps in Cowfold
A heat pump takes heat from the outside air and moves it into your home with electricity running the compressor and fans. The technology is close to air conditioning, which is why we install both, and air-to-air heat pumps are sometimes simply called air conditioning. The work covers hot water cylinders, air-to-air heat pumps and homes heated by oil, LPG or gas, and the jobs we see most are deciding which kind of heat pump suits the home and moving away from fossil-fuel heating.
If your home in or near Cowfold is heated by oil, LPG or electric heaters with no mains gas, an extra £1,500 is available through the Boiler Upgrade Scheme until March 2027, on top of the £7,500.
Warranty on the equipment is the manufacturer’s own, on the manufacturer’s terms, and we set them out on your quote. Each brand sets its own conditions, and we’re happy to talk you through them.
- Place
- Cowfold (RH13)
- Region
- West Sussex
- Price
- Fixed, in writing
- Typical price
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Accreditations
- F-Gas certified, NICEIC approved, MCS
- Call
- 07833 053749
- Page updated
- 30 October 2026
Cowfold questions
Can I get the Boiler Upgrade Scheme grant in Cowfold?
Yes, if the home and the heat pump meet the scheme’s rules: Cowfold is in England, where it applies. The amount depends on the type of heat pump, and the survey confirms which applies. As an MCS certified installer, we apply for it on your behalf.
Will you come out to Cowfold?
Yes, and the size of the place makes no difference to how we work. Send a few details and photos, and we reply the same working day.
Who has to arrange F-Gas leak checks?
Responsibility is shared between the operator, normally whoever owns or controls the equipment, and the service technicians. How often depends on the size of the refrigerant charge in tonnes of CO2 equivalent: at least yearly for 5 to under 50 tCO2e, and every 6 months for 50 to under 500 tCO2e.
Do I need planning permission for a heat pump?
It depends on the property and where the unit goes. Flats have tighter limits, conservation areas add conditions, and Article 4 directions can remove rights, so we check during the survey.
Do you offer maintenance contracts?
Yes. Send details of the systems and how they’re used, and we will suggest a schedule with a fixed price. Leak checks required by the F-gas rules can be built in for larger systems.
How quickly will you reply?
You will hear from us the same working day. For a breakdown that cannot wait, call our 24/7 emergency line.
Do you have a 24/7 line?
Yes. There’s a 24/7 emergency line for problems that can’t wait for a planned visit. Ring 07833 053749 any time and explain the problem.
Heat pumps in Cowfold: local notes
Census 2021 figures found about 74% of households in detached or semi-detached houses. Houses typically have space for an outdoor unit and a hot water cylinder. The Cowfold Conservation Area is within about a third of a mile of the centre of Cowfold. Historic England lists about 25 buildings and structures within half a mile of the centre of Cowfold, including The Parish Church of St Peter (grade I). So the heat pump survey asks two extra questions here: is the home listed, and is it inside a conservation area?
A heat loss calculation decides the size of heat pump your home needs. Period properties close to Church of St Peter can suit a heat pump, though insulation and any heritage protection are checked first.
Cowfold is about 6 miles south of Horsham, in West Sussex. Cowfold gets the same approach as every job we take on: a look at the job first, a fixed-price quote and written records at the end. In West Sussex alone we list 371 places, and Cowfold is one. The nearest of our city pages is Horsham, around 6 miles from Cowfold.
Our nearest recent job to Cowfold was on Nuthurst Road, Henfield (BN5), about 4 miles south: installing a Mitsubishi Electric wall-mounted unit in the main living space: a large open-plan kitchen-dining-living area with exposed beams and a vaulted ceiling.
That includes properties on Oakfield Road, Acorn Avenue and Holm Oaks and nearby roads. If your postcode is in RH13, you are inside the area we cover. Close by, we work in Kent Street (1 mile south-east), Wineham (2 miles south-east), Shermanbury (2 miles south), Crosspost (3 miles east) and Twineham Green (3 miles south-east). We also work in nearby towns such as Crawley (9 miles north-east), Horsham (6 miles north), Worthing (13 miles south-west) and Haywards Heath (8 miles east).
What’s near Cowfold
Nearby you’ll also find The Dene Hospital (4.9 miles east). The countryside around Cowfold includes Knepp Wildland.
Owner checks or an engineer?
Write down what you notice: error codes, noises, drips, smells or a drop in performance. It makes our diagnosis quicker, and a photo of the display helps even more.
Owner care supports servicing; it doesn’t replace it. Simple care keeps the air moving through the system, but the inside of the units, the refrigerant and the electrics still need a qualified engineer.
Keeping the system healthy
Once we have finished, these simple steps help:
- Diary the next service
- Store the MCS certificate and warranty documents together
- Clear leaves and debris from the outdoor unit
Handover includes the controls and how to get the best from a heat pump. Heat pumps tend to work best running steadily rather than in short bursts, and we will explain the settings for your home.
Do not cover radiators with furniture or heavy curtains, as the system relies on them giving out heat.
The process
Where something has to be switched off during the work, we agree it with you first, so you can plan around it. In a business, work can often be done one area at a time. On site, it takes from a couple of days to around a week, depending on the system and how much of the heating changes. A few photos help us make the most of a visit to Cowfold.
- Step one is understanding the house, how it’s heated today and what you’d like to change.
- A heat loss survey works out how much heat each room needs, and we look at the radiators, the cylinder space and where the outdoor unit could go.
- A fixed-price quote follows, setting out the system, any grant that applies and the VAT.
- We fit the outdoor unit and connect it to the heating, hot water and controls.
- The system is commissioned and registered under MCS, and we show you how to use it.
Preparing for the visit
- Clear the space around the indoor unit, or where it will go
- Let us know where the consumer unit is
- Make sure we can reach the outdoor unit, or where it will go
Ask for a quote
Every quote starts with a look at the job, either on a site survey or, for simple jobs, from your photos and details. After that, we send a fixed price so you know the cost before we begin.
Read more
Nearby places to Cowfold
Also in Cowfold
Rented and managed buildings
Keeping records across a portfolio is half the battle. Each visit is written up, plus the F-Gas records where refrigerant is involved, ready for a tenant, a buyer or an inspection.
Whether it’s one property or many, you get the same standard: diagnosis, a fixed price, access agreed with the people on site and paperwork at the end.
A customer’s words
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager