Greater London · Heat pump installation
Air Source Heat Pumps in Clay Hill
Heat pump installation, in Clay Hill and nearby. Ask us for a fixed-price quote; we reply the same working day.
- Ageing boilers that will need replacing
- Replacing a combi boiler with a heat pump
- Wanting to stop using oil, LPG or gas for heating
Air source heat pumps for homes and businesses in Clay Hill
Until 31 March 2027, a heat pump installed in residential accommodation carries 0% VAT, with 5% from 1 April 2027. That follows HMRC Notice 708/6, and it doesn’t apply to businesses, and for air-to-air systems we confirm the VAT on your quote. Please treat this as general information rather than tax advice. Typical jobs include ageing boilers that will need replacing and not knowing whether a grant applies, across hot water cylinders, air-to-air heat pumps and underfloor heating.
A terrace in Clay Hill shares walls with its neighbours, which helps keep heat in, as long as there’s a sensible spot for the outdoor unit and its noise is checked against the MCS planning standard.
If a fault appears while the equipment is under the manufacturer’s warranty, tell us the make, model and installation date. We’ll tell you how the manufacturer’s warranty is likely to apply before anything chargeable is done.
- Location
- Clay Hill (EN2, EN1)
- Region
- Greater London
- Pricing
- Fixed after a survey or photos
- Prices
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Accreditations
- NICEIC and F-Gas, MCS
- Telephone
- 07833 053749
- Page updated
- 30 October 2026
Air source heat pumps around Clay Hill
In London, outside space and the rules for flats often decide which kind of heat pump suits.
If your home is listed, like Forty Hall about 0.7 miles east, listed building consent comes before any heat pump work.
Clay Hill is about 1 mile north of Enfield, in Greater London. Anywhere in EN2, we can help with air source heat pumps. Our Greater London coverage runs to 764 places, and Clay Hill is one of them. Our London page covers places nearby, about 12 miles away.
Not far from Clay Hill, a recent job of ours was on Greenwich High Road, Greenwich (SE10), about 14 miles south: installing a Mitsubishi Electric wall-mounted unit in the retail area and a second unit in the stockroom and office.
From Cedar Road, Flash Lane and Acacia Road to the smaller roads in between, the whole area is covered. Work in EN2 and EN1 follows the same survey, fixed-price quote and written records as everywhere else we cover. Neighbouring places we cover include Gordon Hill (1 mile south), Forty Hill (1 mile south-east), Crews Hill (1 mile north-west), Bulls Cross (1 mile east) and Enfield Chase (1 mile south-west). Larger places within reach include London (12 miles south), City of Westminster (11 miles south), Marylebone (11 miles south) and Kensington (13 miles south-west).
Near you in Clay Hill
Typical jobs here are in properties near Chace Community School, Rose and Crown pub and Enfield Town Park and the streets around them. Clay Hill’s nearest station is Gordon Hill station, about 0.8 miles south-west. Nearby you’ll also find Edmonton Green Shopping Centre (3.5 miles south) and Museum of Enfield (1.5 miles south). Open spaces near Clay Hill include Fir and Pond Woods and Pole Hill.
Clay Hill: your questions answered
Does the Boiler Upgrade Scheme cover homes in Clay Hill?
Clay Hill is covered, as the scheme runs across England and Wales. For an air-to-water heat pump the amount is £7,500; an air-to-air system can get £2,500 if it replaces the fossil-fuel heating outright, meets the home’s full heating demand and isn’t an add-on to a boiler. You don’t apply yourself: the MCS certified installer does, which is us.
Is planning permission needed for a heat pump in Clay Hill?
It comes down to the building and the spot chosen for the outdoor unit. A conservation area takes in the middle of Clay Hill. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit can’t face a road. Where needed, we check with Enfield council, which is normally the planning authority for Clay Hill.
Can you set up regular servicing?
Yes. Maintenance contracts are part of what we do, set at the interval the system and the manufacturer’s terms need. Each visit is recorded, with F-Gas records where refrigerant work is involved.
What accreditations do you have?
AirCon Doctor is an F-Gas certified company, with NICEIC approval for electrical work and MCS certification for heat pumps. We are also Checkatrade members.
Do you provide F-Gas records?
Yes. Each visit is written up, and any work on the refrigerant circuit goes in the F-Gas records. File them with the system’s paperwork.
Do you protect the property while you work?
We start with protection: sheets over the floor and nearby furniture. Any drilling is agreed with you first, and we clear up the dust and offcuts when we finish.
Whose job is it to check the system for leaks?
The F-gas rules share it between the equipment’s operator and the engineers who work on it. The interval depends on the refrigerant charge, measured in tonnes of CO2 equivalent: at least every 12 months from 5 tCO2e, and every 6 months from 50 tCO2e.
What affects the cost of air source heat pumps
Jobs vary more than people expect. The main factors:
- The distance and route between the indoor and outdoor units
- One-off work versus a regular service cycle
- What we find on the survey or diagnosis
Several rooms, units or sites on one quote often makes better use of the time. Tell us about everything you’d like looked at and we’ll price it together.
What to send for a quote
Simple jobs can often be priced from pictures and some basics. Useful things to send:
- The outside wall, roof or yard where the outdoor unit sits or would go
- The fuse board and where it is in the property
- The paperwork from the last service, if you have it
Photos are enough for some jobs; others need a visit first. Bigger systems, commercial sites and awkward pipe routes are normally surveyed on site. Either way, you get a fixed price before any work is booked.
What we are called out for in Clay Hill
The Boiler Upgrade Scheme has made people ask whether their home could qualify. Eligibility depends on the property, the system and the scheme rules, so we check before you commit.
These are the situations we see most often:
- Finding a place for the outdoor unit
- Choosing between air-to-water and air-to-air
- Working out where a cylinder could go
For a home near Gordon Hill station, the survey looks at whether an air-to-water or air-to-air heat pump suits better.
Comparing quotes
- Who does the electrical work, and whether they can certify it
- How VAT is shown, and which rate applies
- Whether anyone has checked the property or the system first
Nearby places to Clay Hill
More services for Clay Hill
How it works
Testing is the last part of the visit wherever the system can be switched on. Then we explain what was done and answer your questions, and anything that needs a follow-up is pointed out there and then. The visit takes a few days for most air-to-water installations, with air-to-air systems often quicker. If your building in Clay Hill has a managing agent, a concierge or sign-in rules, mention them when you book.
- We start with your plans and the property.
- A survey covers heat loss, radiators, hot water and where the outdoor unit could sit.
- You get our view on the right type for the house, and on whether the Boiler Upgrade Scheme applies.
- We install the heat pump and connect it up.
- We commission it, complete the MCS certificate and show you how to use it.
Before we arrive
- Tell us about any building rules, permits or sign-in
- Clear a path to the units and the space around them
- Name a contact who can meet us at the agreed time
How to get a quote
If you need air source heat pumps in Clay Hill, call us on 07833 053749 or fill in the contact form. Tell us what kind of property it is and what you’d like done, and send a few photos if you can. Enquiries get a reply the same working day.
Advice
Before you call an engineer
On air conditioning, the filters in the indoor unit are normally the one part owners can clean, if the manual says so. They come out, get a gentle clean and go back only when they’re dry. For a heat pump, the main owner jobs are a clear outdoor unit and sensible control settings.
Owners can handle the everyday basics: keep the outdoor unit clear of leaves, plants and clutter, check the settings and the remote, and follow the cleaning the manual describes. Opening up the units, the electrics and the refrigerant circuit are a job for us.
What a customer said
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead