Kent · Heat pump installation
Heat pump installation in Chalk, Kent
One call covers heat pump installation in Chalk: diagnosis, fixed price, work and sign-off. An F-Gas certified company, NICEIC approved, on Checkatrade.
- Deciding on the outdoor unit position
- Questions about the Boiler Upgrade Scheme
- Comparing heat pump types
Air source heat pumps for homes and businesses in Chalk
Air-to-water heat pumps heat your hot water through a cylinder. Homes with a combi boiler may not have a cylinder, so finding space for one is part of the survey. Air-to-air systems do not heat hot water, so you’ll need another way to do that. The work covers radiator systems, air-to-air heat pumps and homes heated by oil, LPG or gas, and people most often call us about plans to switch to electric heating with a heat pump and checking eligibility for a heat pump grant.
If your home in or near Chalk is heated by oil, LPG or electric heaters with no mains gas, the Boiler Upgrade Scheme adds an extra £1,500 until March 2027 for an air source or ground source heat pump.
Warranty on the equipment is the manufacturer’s own, on the manufacturer’s terms, and we set them out on your quote. Each brand sets its own conditions, so we go through them with you rather than leave you to find the small print.
- Place
- Chalk (DA12)
- Region
- Kent
- Price
- A fixed-price quote up front
- Price guide
- £8,000–£16,000 (0% VAT on homes), before the grant
- Accreditations
- NICEIC approved, F-Gas certified, MCS
- Response
- We reply the same working day
- Phone
- 07833 053749
- Updated
- 30 October 2026
Keeping the system healthy
Once we have finished, these simple steps help:
- Look at insulation alongside the heat pump
- Read the manufacturer’s warranty terms for your brand
- Avoid switching the heat pump on and off often
After commissioning, the installation is registered under MCS and you receive the certificate. File it with the warranty documents for future reference.
Do not cover radiators with furniture or heavy curtains, as the system relies on them giving out heat.
What a heat pump looks like in Chalk
At about 2 miles from the coast, Chalk is close enough for sea air to matter. Near the coast, we choose the outdoor unit position with salt-laden wind in mind. VOA council tax data date about 78% of homes in the Chalk area to the post-war years, 1945 to 1972, and Census 2021 figures found about 64% of households in detached or semi-detached houses. For homes of that age, the survey checks the insulation, the radiators and the hot water setup. Detached and semi-detached houses normally have room for the outdoor unit and a cylinder.
Period properties close to Church of St Mary can suit a heat pump, though insulation and any heritage protection are checked first. If your home is listed, like Cobham College about 2.8 miles south, listed building consent comes before any heat pump work.
Chalk is about 1 mile east of Gravesend, in Kent. Across the DA12 area, we cover air source heat pumps. Our list for Kent has 922 entries, and Chalk is one. For properties nearby, see our Bromley page (17 miles or so).
Not far from Chalk, a recent job of ours was on Station Road, Orpington (BR6), about 14 miles west: installing three Daikin cassette units in the main office area and a wall-mounted unit in the client meeting room.
Every address in DA12 is within our area, from the main roads to the quietest streets. Our engineers work on Chalk Road, Castle Lane and Orlick Road and the roads around them. Close by, we work in Upper Ifield (1 mile south), Thong (1 mile south), Shorne (1 mile south-east), Shorne Ridgeway (2 miles south-east) and Higham (2 miles south-east). Larger places within reach include Maidstone (12 miles south-east), Sittingbourne (15 miles south-east), Dartford (8 miles west) and Sevenoaks (14 miles south-west).
Around Chalk
We fit and service air conditioning in homes and premises around Shorne Woods Country Park, Westcourt Primary School and St John's Catholic Comprehensive. For rail, the closest station is Gravesend station, about 2 miles west of the centre. Nearby you will also find Rochester Castle (4.8 miles south-east) and Gravesham Museum (1.9 miles north-west). For a walk, there’s Gad's Hill and Rede Common.
When it’s something else
In fairness, there are a few things this work won’t fix:
- Planning approval where permitted development does not apply
- Disconnecting or servicing a gas boiler
- Tax advice on your own circumstances
If in doubt, ring 07833 053749, or email if that’s easier and we will say what we think.
What the work covers
- Hot water cylinders
- Radiator systems
- Underfloor heating
- Air-to-water heat pumps
- Homes heated by oil, LPG or gas
- Air-to-air heat pumps
FAQs for Chalk
Does sea air affect air conditioning in Chalk?
It can, as Chalk is within about 2 miles of the sea, where salt in the air is hard on coils and fixings. We site outdoor units out of the worst of the sea wind where possible and can suggest models with corrosion protection where the manufacturer offers it.
Do I need planning permission for a heat pump in Chalk?
There’s no single answer: the building and the outdoor unit position decide it. The half-mile around the middle of Chalk holds about 9 listed buildings and structures. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit cannot face a road. Where needed, we check with the local planning authority (for Chalk, typically Gravesham council).
Can I get the Boiler Upgrade Scheme grant?
We confirm eligibility at the survey stage. Only one grant is available per property, it can’t replace a low-carbon system, and hybrids do not qualify, among other rules.
Is there VAT on a heat pump?
In residential accommodation, 0% until 31 March 2027 and 5% afterwards. Hotels and businesses pay the standard rate, and this is not tax advice.
How much does an air source heat pump cost?
Expect £8,000–£16,000 for an air-to-water system, with 0% VAT on homes, before the grant is taken off. The heat pump size, radiator changes and the cylinder decide where in that range you are. Air-to-air is priced after a survey.
How long will it take to install a heat pump?
As a guide, it takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. The programme is planned to keep time without heating short and agreed before we start.
When will I hear back?
On the same working day you contact us. After that, we agree a survey, diagnosis or installation date that suits you, with a fixed price before work starts.
What happens on the day
There’s very little for you to do on the day. Someone needs to let us in and show us the units, or where they’re going, and the rest is down to us. At the end, we tidy up and run through the work with you. For a place like Chalk, the timing is set with you and the travel is our side of the planning.
- We start with your plans and the property.
- We survey for heat loss and look at radiators, cylinder space and outdoor unit options.
- You get our view on the right type for the house, and on whether the Boiler Upgrade Scheme applies.
- We install the heat pump and connect it up.
- After commissioning, you get the MCS certificate and a handover.
Preparing for the visit
- Mention any roof access, ladders or high-level work
- Plan for pets to be kept clear during the visit
- Clear access to the fuse board
Get a fixed-price quote
VAT is set out clearly on every quote, with the rate that applies to your job. Homes, businesses and different kinds of work can be treated differently for VAT, so we confirm it on the quote. For a fixed-price quote, phone us on 07833 053749, or email if that’s easier.
Read more
Places near Chalk
Other services in Chalk
What owners can safely do
Good habits make our visits easier, not unnecessary. Simple care keeps the air moving through the system, but the inside of the units, the refrigerant and the electrics still need a qualified engineer.
On air conditioning, the filters in the indoor unit are typically the one part owners can clean, if the manual says so. With the power off, they lift out, can be vacuumed or rinsed and must be fully dry before they go back. On a heat pump, the equivalent is keeping the outdoor unit clear and checking the controls.
From one of our customers
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath