Surrey · Heat pump installation
Heat pump installers in Brewer Street
Looking for air source heat pumps in Brewer Street? We look at the job first, give you a fixed-price quote and do the work at a time that suits you, then sign it off with written records.
- Deciding on the outdoor unit position
- Checking eligibility for a heat pump grant
- Moving away from fossil-fuel heating
How the job changes from property to property
Outdoor unit position and planning
Flats and blocks of flats have different limits, and Article 4 directions can remove rights. Listed buildings also need separate consent and we check what applies to you.
Air-to-water heat pumps
Flow temperatures are lower than with a typical boiler, which is why radiator sizing is part of the survey.
Air source heat pumps in Brewer Street
We install air source heat pumps in Brewer Street and across Surrey, and we’re MCS certified. Air-to-water systems feed your radiators or underfloor heating and hot water cylinder, while air-to-air systems heat rooms directly through indoor units and can cool them too. We help you work out which suits your home. The work covers underfloor heating, hot water cylinders and air-to-air heat pumps, and people most often call us about moving away from fossil-fuel heating and not knowing whether a grant applies.
Space for an outdoor unit is rarely an issue near Brewer Street, so the design focuses on heat loss and radiators.
Any work on the refrigerant circuit is recorded: the work carried out, the refrigerant involved and the quantities. Keep the records with the manual and the warranty documents, ready for the next service or a warranty query.
- Place
- Brewer Street (RH1)
- Wider area
- Surrey
- Credentials
- NICEIC approved, F-Gas certified, MCS
- Quote
- A fixed price before any work starts
- Costs
- £8,000–£16,000 (0% VAT on homes), before the grant
- Replies
- We reply the same working day
- Phone
- 07833 053749
- Updated
- 30 October 2026
Why act early in Brewer Street
From 1 April 2027, VAT on heat pumps in homes rises from 0% to 5%. If you are thinking about a heat pump, that date is worth knowing, though the right time also depends on your home and heating. An early booking makes the visit to Brewer Street easier to arrange.
One room or a whole building, we price it on the same basis: what needs doing, how we get to it and what it needs. You will have a fixed price before any work starts, and the quote sets out the VAT.
Why us?
- Covering London and the South East
- A site survey and a fixed-price quote
- An F-Gas certified company, as the law requires
- MCS certification for heat pump work
Take a look at what air conditioning costs or our accreditations.
What a heat pump looks like in Brewer Street
About 68% of households live in detached or semi-detached houses, according to Census 2021 figures. Detached and semi-detached houses typically have room for the outdoor unit and a cylinder. The middle of Brewer Street is part of the Place Farm and Brewer Street, Bletchingley Conservation Area. In the mile around Brewer Street’s centre, 3 conservation areas have been designated. Historic England lists about 10 buildings and structures within half a mile of the centre of Brewer Street, including Brewer Street Farm House (grade I). For a heat pump, permitted development does not apply within the grounds of a listed building, and in a conservation area the outdoor unit can’t go on a wall or roof facing a road, so we check with the planning team at Tandridge council, which typically handles Brewer Street where necessary.
Every heat pump design starts with a room-by-room heat loss calculation.
Brewer Street is about 2 miles south of Caterham, in Surrey. Properties in Brewer Street get the same service as everywhere we cover: a look at the job first, a fixed-price quote and written records at the end. Brewer Street is one of 395 towns, villages and districts in Surrey we cover.
The closest recent job we can point to from Brewer Street was on Godstone Road, Caterham (CR3), about 2 miles north: installing a Samsung multi-split system serving three bedrooms and a home office.
We cover every part of the RH1 postcode area for air source heat pumps. Streets in the area include Whitehill Lane and Brewer Street, all of which are in our area. We also cover Nutfield (1 mile south-west), Chaldon (2 miles north), South Merstham (2 miles west), Merstham (2 miles north-west) and South Nutfield (2 miles south-west). Further out, we also cover Epsom (9 miles north-west), Horley (6 miles south-west), Redhill (3 miles west) and Ewell (10 miles north-west).
Landmarks near Brewer Street
In Brewer Street, that means homes and buildings near Merstham Park School, Oakhyrst Grange School and The Prince Albert Public House and the streets around them. For rail, the closest station is Merstham station, roughly 2.2 miles west. Nearby you will also find East Surrey Museum (2.2 miles north-east) and The Belfry (3.1 miles west). The countryside around Brewer Street includes Mercers Lake and Bay Pond.
The process
If the system has to be off for part of the visit, we tell you before work begins so it does not catch you out. In a business, work can often be done one area at a time. On site, it takes a few days on site, depending on the cylinder, the radiators and the pipework involved. For a place like Brewer Street, the timing is set with you and the travel is our side of the planning.
- First we find out about the property, the heating you have now and what you’re hoping for.
- On the visit we calculate what every room loses on a cold day, then check the radiators, room for a cylinder and outdoor unit options.
- You get a fixed-price quote, with any grant you are eligible for and the VAT explained.
- The outdoor unit, the indoor equipment and the controls are installed and connected.
- The system is commissioned and registered under MCS, and we show you how to use it.
How to prepare
- Arrange for someone to be there to let us in
- Clear the space around the indoor unit, or where it will go
- Dig out any previous service or F-Gas records
Getting a quote
For air source heat pumps in Brewer Street, give us a ring on 07833 053749. Tell us what kind of property it is and what you’d like done, plus some pictures if they’re to hand. Enquiries get a reply the same working day.
Read more
Nearby places to Brewer Street
Also in Brewer Street
Signs you need air source heat pumps in Brewer Street
Extensions, renovations and loft conversions are a natural time to rethink the heating. Pipework, radiators and space for a cylinder are easier to plan while work is going on.
It’s time to call us if you’re dealing with:
- Wanting to stop using oil, LPG or gas for heating
- Not knowing whether a grant applies
- Checking emitters for a heat pump
Period properties close to Church of St Mary the Virgin can suit a heat pump, though insulation and any heritage protection are checked first.
Comparing quotes
- Whether the quote is a fixed price
- Which VAT rate the quote uses, and why
- Whether a new circuit is included and who certifies it
FAQs for Brewer Street
Can I get the Boiler Upgrade Scheme grant in Brewer Street?
Brewer Street is in England, where the Boiler Upgrade Scheme runs. It gives £7,500 towards an air-to-water or ground source heat pump, or £2,500 towards an air-to-air heat pump that replaces the fossil-fuel heating and meets the whole home’s heating need. We hold MCS certification, so the application is ours to make for you.
Is Brewer Street within the area you cover?
Yes, smaller places are covered as well as towns. We’re based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Can landlords and managing agents book you?
Yes. From one rented home to commercial buildings, we work the same way: a look first, a fixed-price quote and written records.
Can I fit air conditioning or a heat pump myself?
Not the refrigerant work. Under the F-gas rules, it must be done by qualified engineers from a certified company, and a new electrical circuit is notifiable building work unless a registered competent person does it.
Do you offer emergency call-outs?
Yes. If something urgent happens, like water coming from a unit or a critical room overheating, call our 24/7 line and we’ll tell you what to do first.
Which manufacturers do you install and repair?
The main ones, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. For a new system, we suggest the make and model that suit the property and tell you why.
Do I need new radiators for a heat pump?
It depends on each radiator and the room it heats. At the lower temperatures a heat pump uses, radiators need more surface, and the survey checks each one.
A customer’s words
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead