Kent · Heat pump installation
Heat pump installation in Breach, Kent
Expert air source heat pumps for Breach: diagnosis first, then a fixed-price quote, the work and written records. Call for a fixed-price quote.
- Planning and permitted development questions
- Choosing between air-to-water and air-to-air
- Replacing a combi boiler with a heat pump
Breach: your questions answered
Do you cover smaller places like Breach?
Yes, and the size of the place makes no difference to how we work. A few photos and the postcode are enough to get things started.
Can I get the Boiler Upgrade Scheme grant in Breach?
Yes, if the home and the heat pump meet the scheme’s rules: Breach is in England, where it applies. It gives £7,500 towards an air-to-water or ground source heat pump, or £2,500 towards an air-to-air heat pump that replaces the fossil-fuel heating and meets the whole home’s heating need. You don’t apply yourself: the MCS certified installer does, which is us.
How long will it take to install a heat pump?
Expect it to take a few days for most air-to-water installations, with air-to-air systems often quicker. How much of the heating changes decides most of the time and the timing is set out with your quote.
What does F-Gas certified mean?
The law says any company working on equipment containing F gas has to be certified, and the engineers need their own qualifications. It’s how you know the refrigerant is being handled legally and safely.
What’s the price of a heat pump installation?
For air-to-water, the price is £8,000–£16,000 (0% VAT on homes) before any grant. The Boiler Upgrade Scheme offers £7,500 to eligible homes in England and Wales, and we confirm eligibility before you commit.
Can landlords and managing agents book you?
Yes. Homeowners, landlords, agents and businesses all book us across London and the South East. Let us know who the records should go to.
Do I get paperwork after the visit?
Yes, on every job. A new system comes with commissioning details, F-Gas records and the manufacturer’s warranty information, and repairs and services get a record of the work.
Air source heat pumps in Breach, done properly
For an air-to-water heat pump, the price is £8,000–£16,000 (0% VAT on homes), before the grant. The Boiler Upgrade Scheme can provide £7,500 towards an eligible air-to-water system in England and Wales, and as the installer we apply for it on your behalf. Eligibility depends on the property, so we confirm it before anything is agreed. If you are dealing with no space for a hot water cylinder and checking whether planning permission is needed, we can help.
Older and listed homes in villages like Breach need extra care, and permitted development does not cover listed buildings, so we check consent first.
Refrigerant work is written up in the F-Gas records: what was done, the refrigerant type and any amount added or recovered. Keep the records with the manual and the warranty documents, ready for the next service or a warranty query.
- Where
- Breach (ME9)
- Region
- Kent
- Price
- A fixed-price quote up front
- Enquiries
- Answered the same working day
- Accreditations
- NICEIC and F-Gas, MCS
- Typical price
- £8,000–£16,000 (0% VAT on homes), before the grant
- Phone
- 07833 053749
- Page updated
- 30 October 2026
What a heat pump looks like in Breach
The coast is only about 3 miles from Breach. Near the coast, we choose the outdoor unit position with salt-laden wind in mind. The 2021 Census found about 70% of households in detached or semi-detached houses. Houses usually have space for an outdoor unit and a hot water cylinder.
Period properties close to Church of St Mary can suit a heat pump, though insulation and any heritage protection are checked first. If your home is near Newington station and heated by a gas boiler, an air-to-water heat pump can replace it where the survey shows it suits.
Breach is about 3 miles east of Gillingham, in Kent. Homes and businesses alike in Breach, we can help with air source heat pumps. We reply to enquiries the same working day, and there’s a 24/7 emergency line. We cover 922 places across Kent. We also work in Bromley, around 28 miles away.
All of ME9 is covered, from the main roads to the quietest streets. Places around Breach that are also on our list: Newington (1 mile south-east), Lower Hartlip (1 mile south-west), Lower Halstow (1 mile north-east), Upchurch (1 mile north) and Moor Street (1 mile west). Within a short drive, we also cover Maidstone (9 miles south-west), Sittingbourne (4 miles east), Gravesend (13 miles west) and Faversham (11 miles east).
Local landmarks in Breach
Locally, jobs take us to houses, flats and workplaces close to Berengrave Chalk Pit, The Wheatsheaf pub and Leigh Academy Rainham and the streets around them. For rail, the closest station is Newington station, about 0.8 miles south-east of the centre. A little further out are Court Hall Museum (3.5 miles east) and Medway Maritime Hospital (5 miles west). For a walk, there’s Bishop Saltings.
Places near Breach
Other services in Breach
What we do, step by step
On the day, we arrive at the time agreed with you and run through the plan before anything else. Dust sheets go down over floors and anything close to the work, and anything electrical is made safe before work starts. On site, it takes a few days for most air-to-water installations, with air-to-air systems often quicker. For a place like Breach, the timing is set with you and the travel is our side of the planning.
- Step one is understanding the house, how it’s heated today and what you’d like to change.
- The survey measures heat loss room by room and looks at radiators, hot water and the best spot for the outdoor unit.
- A fixed-price quote follows, setting out the system, any grant that applies and the VAT.
- Installation covers the outdoor unit, the indoor connections and the controls.
- Commissioning, MCS certification and a handover of the controls finish the job.
Getting ready for the visit
- Name a contact who can meet us at the agreed time
- Mention any managing agent or landlord rules we need to follow
- Clear the space around the indoor unit, or where it will go
Getting a price
Photos are the fastest route to a quote: the inside and outside of the property where the work is, plus the rating plate of any unit already there. Tell us the address and what you need, and many jobs can be priced from that.
Read more
When something else is needed
Before you book, it helps to know what’s not included:
- Promising eligibility for the Boiler Upgrade Scheme
- Improving the building’s insulation
- Formal advice on VAT for your situation
If you’re not sure, just call us on 07833 053749 or drop us a line and we’ll give you a straight answer.
What we work on in Breach
- Hot water cylinders
- Radiator systems
- Homes heated by oil, LPG or gas
- Air-to-water heat pumps
- Underfloor heating
- Air-to-air heat pumps
Safe owner checks
Leave the units and pipework where they are. Disconnecting a system means dealing with refrigerant, which only a qualified engineer can do, and the electrical side needs a competent person. If you need something moved, we can quote for it.
Good habits make our visits easier, not unnecessary. Simple care keeps the air moving through the system, but the inside of the units, the refrigerant and the electrics still need a qualified engineer.
System by system
Hot water cylinders
Hot water from an air-to-water system is stored in a cylinder. The survey looks at where it can go, especially if you have a combi boiler.
Radiators and underfloor heating
Heat pumps run at lower flow temperatures, so radiators may need to be larger, and the survey checks each one.
A customer’s words
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath