Hampshire · Heat pump installation
Heat pump installers in Binley
Air source heat pumps for Binley, from F-Gas certified engineers, with warranty terms explained brand by brand. We reply to enquiries the same working day.
- Wanting to stop using oil, LPG or gas for heating
- Replacing a combi boiler with a heat pump
- Working out whether radiators need upsizing
Air source heat pumps for homes and businesses in Binley
Many air source heat pumps can be installed as permitted development in England, without a planning application. Conditions include a maximum outdoor unit size of 1.5 m³, compliance with MCS 020(a), use for more than cooling alone and a site outside the curtilage of a listed building. We look at the planning position for your home during the survey. Common call-outs are for questions about where the outdoor unit can go and moving away from fossil-fuel heating, on air-to-air heat pumps, hot water cylinders and underfloor heating.
Older and listed homes in villages like Binley need extra care, and permitted development doesn’t cover listed buildings, so consent comes first.
Some warranty terms depend on the system being serviced regularly by a qualified engineer. Where yours does, a regular service with us keeps that side in order, and every service is written up.
- Where
- Binley (SP11)
- Region
- Hampshire
- Replies
- Same working day
- Typical price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Accreditations
- F-Gas certified company, NICEIC approved, MCS
- Price
- A fixed price before we start
- Phone
- 07833 053749
- Reviewed
- 30 October 2026
Heat pumps in Binley: local notes
The last census (2021) found about 65% of households in detached or semi-detached houses. Detached and semi-detached houses normally have room for the outdoor unit and a cylinder.
Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler.
Binley is about 6 miles north-east of Andover, in Hampshire. If you need air source heat pumps in Binley, it’s easy to get a fixed-price quote: please phone us on 07833 053749 or fill in the contact form. We work across London and the South East, Binley included. Our area takes in 683 places across Hampshire. For properties nearby, see our Guildford page (36 miles or so).
Streets in the area include Binley Bottom and Long Hedge Drove, all of which are in our area. Here we cover the SP11 postcode area. Neighbouring places we cover include Wadwick (1 mile east), St Mary Bourne (2 miles south), Cole Henley (3 miles south-east), Whitchurch (4 miles south-east) and Hurstbourne Priors (4 miles south). We also work in nearby towns such as Basingstoke (13 miles east), Winchester (15 miles south), Andover (6 miles south-west) and Tadley (12 miles north-east).
Landmarks near Binley
The closest station to Binley is Whitchurch (Hampshire) station, roughly 3.6 miles south-east. Well-known places in the area include Andover War Memorial Hospital (5.9 miles south-west). The countryside around Binley includes Sidown Hill.
Honest limits
Not every problem is solved by air source heat pumps, and we’d rather say so up front. It will not put right:
- Tax advice on your own circumstances
- Disconnecting or servicing a gas boiler
- Planning approval where permitted development doesn’t apply
If you’re not sure, just give us a ring on 07833 053749 or send an email and we’ll give you a straight answer before booking.
Where we work
- Underfloor heating
- Homes heated by oil, LPG or gas
- Radiator systems
- Hot water cylinders
- Air-to-water heat pumps
- Air-to-air heat pumps
The process
Refrigerant work is done by qualified engineers working for an F-Gas certified company, while the electrical side is covered by our NICEIC approval. So on the day, you do not need a separate electrician for the electrical side. On site, it takes a few days for most air-to-water installations, with air-to-air systems often quicker. Work in Binley is booked in advance at a time that suits you.
- You tell us about the home and what you want from a heat pump.
- A survey covers heat loss, radiators, hot water and where the outdoor unit could sit.
- We explain which type of heat pump suits the home and whether a grant could apply.
- Installation follows on the agreed dates.
- The job ends with commissioning, the MCS certificate and a walk through the controls.
Preparing for the visit
- Tell us about access, such as roof hatches, high walls or locked plant areas
- Clear access to the fuse board
- Clear the space around the indoor unit, or where it will go
How to get a quote
Photos are the fastest route to a quote: the inside and outside of the property where the work is, plus the rating plate of any unit already there. Tell us the address and what you need, and many jobs can be priced from that.
Advice
Do you need air source heat pumps in Binley?
Many enquiries start with a question about the Boiler Upgrade Scheme. Eligibility depends on the property, the system and the scheme rules, so we check before you commit.
Any of these is worth a proper look:
- Working out where a cylinder could go
- Questions about the Boiler Upgrade Scheme
- Choosing between air-to-water and air-to-air
Highclere Castle lies about 3.8 miles north-east. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions.
What to look for in a quote
- Whether the manufacturer’s warranty depends on regular servicing
- Which brand and model they’re proposing, and why
- Whether anyone has checked the property or the system first
Places near Binley
More services for Binley
Binley questions
Is a heat pump in Binley permitted development?
It comes down to the building and the spot chosen for the outdoor unit. The half-mile around the middle of Binley holds about 3 listed buildings and structures. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit cannot face a road. Where needed, we check with the planning department at Basingstoke and Deane council, typically the authority for Binley.
Does the Boiler Upgrade Scheme cover homes in Binley?
Binley is in England, where the Boiler Upgrade Scheme runs. The amount depends on the type of heat pump, and the survey confirms which applies. The installer applies, and we’re MCS certified.
Which accreditations do you hold?
We’re an F-Gas certified company, NICEIC approved for electrical work and MCS certified for heat pumps. We are members of Checkatrade too.
Will my radiators work with a heat pump?
The heat loss survey answers that, room by room. Rooms where the radiator is big enough stay as they are and any changes are in the quote.
Do you protect the property while you work?
Protection goes down first: dust sheets over floors and anything close to the work. Holes and fixings are agreed with you, and we clean up afterwards when we finish.
Do you survey before quoting?
Yes. For simple jobs, photos and a few details can be enough, while larger systems and faults that need testing are seen on site.
What’s the difference between air-to-water and air-to-air heat pumps?
Air-to-water replaces the boiler for heating and hot water, while air-to-air heats and cools rooms. The survey helps decide. We install both types.
Rented and managed buildings
Where a tenant occupies the property but the landlord owns the system, it’s worth checking the agreement for who looks after the system. We can quote either party, and the paperwork can go to both.
We also work for facilities teams in offices, schools and public buildings in Binley and across Hampshire. Work can be phased by floor, zone or building around the people who use them.
From one of our customers
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead