Essex · Heat pump installation
Berners Roding air source heat pumps
F-Gas certified and NICEIC approved, we cover Berners Roding for MCS certified installation of air source heat pumps for heating and hot water, with the Boiler Upgrade Scheme grant applied for. Fixed-price quotes and a 24/7 emergency line.
- Moving away from fossil-fuel heating
- Deciding on the outdoor unit position
- Checking emitters for a heat pump
Air source heat pumps in Berners Roding
As an MCS certified installer, we fit air source heat pumps for homes in Berners Roding and the rest of Essex. Air-to-water systems feed your radiators or underfloor heating and hot water cylinder, while air-to-air systems heat rooms directly through indoor units and can cool them too. We help you work out which suits your home. We’re often asked to deal with a boiler that’s getting old and deciding which kind of heat pump suits the home, across radiator systems, hot water cylinders and homes heated by oil, LPG or gas.
Homes around Berners Roding usually have room outside for a heat pump, so the design focuses on heat loss and radiators.
Any work on the refrigerant circuit is recorded: the work carried out, the refrigerant involved and the quantities. Keep the records with the manual and the warranty documents, ready for the next service or a warranty query.
- Place
- Berners Roding (CM5)
- Region
- Essex
- Response
- Same working day
- Approvals
- NICEIC and F-Gas, MCS
- Quotes
- Fixed, in writing
- Prices
- £8,000–£16,000 before the grant, 0% VAT on homes
- Call
- 07833 053749
- Updated
- 30 October 2026
What happens on the day
Our engineers arrive at the time agreed with you and run through the plan before anything else. Dust sheets go down over floors and anything close to the work, and anything electrical is made safe before work starts. On site, it takes from a couple of days to around a week, depending on the system and how much of the heating changes. Photos of the existing unit help with repairs and servicing in Berners Roding.
- We start with your plans and the property.
- We survey for heat loss and look at radiators, cylinder space and outdoor unit options.
- We explain which type of heat pump suits the home and whether a grant could apply.
- We install the heat pump and connect it up.
- The job ends with commissioning, the MCS certificate and a walk through the controls.
Before we arrive
- Give us access to the outside wall, roof or yard where the outdoor unit sits
- Keep pets and children away from the work area
- Make sure we can reach the consumer unit or fuse board
Ask for a quote
Here’s what helps us quote: the address and the type of property, photos of the rooms or units, the make and model of any existing system and anything you’ve noticed, such as an error code or a noise. Once you have those, call us on 07833 053749 or send an email.
Related advice
Towns and villages near Berners Roding
What else we do in Berners Roding
What owners can safely do
Never try to top up, release or handle refrigerant yourself. The law requires anyone working on equipment containing F gas to hold the right qualifications, and the company to be certified, and refrigerant lines can cause cold burns. A suspected leak is our job, not yours.
Leave the units and pipework where they are. Moving a unit involves the refrigerant circuit, so it needs an F-Gas qualified engineer, and the electrics need care too. Ask us to quote for a move instead.
Berners Roding: your questions answered
Do I need planning permission for a heat pump in Berners Roding?
The answer turns on the property and where the outdoor unit would sit. Historic England lists about 11 buildings and structures within half a mile of the centre of Berners Roding. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit cannot face a road. Where needed, we check with the planning department at Epping Forest council, typically the authority for Berners Roding.
Can I get the Boiler Upgrade Scheme grant in Berners Roding?
Berners Roding is in England, where the Boiler Upgrade Scheme runs. Whether your home qualifies, and for how much, depends on the type of heat pump and the heating it replaces. You don’t apply yourself: the MCS certified installer does, which is us.
Does servicing affect my warranty?
Each manufacturer decides. If servicing is in the terms, missing one could affect a claim and we’ll tell you what your brand asks for.
Is Berners Roding in your area?
Yes. We work across Greater London, Surrey, Kent, East and West Sussex, Hampshire, the Isle of Wight, Berkshire, Buckinghamshire, Oxfordshire, Hertfordshire and Essex, and that includes Berners Roding.
Do I get paperwork after the visit?
Yes. Every visit is written up, and any work on the refrigerant circuit goes in the F-Gas records. File them with the system’s paperwork.
Can you set up regular servicing?
Yes. Send details of the systems and how they’re used, and we will suggest a schedule with a fixed price. That can include the leak checks the F-gas rules require for larger systems.
Will my radiators work with a heat pump?
We find out during the survey. Where a radiator is already large enough, it stays, and any that need upsizing are set out in the quote.
Why act early in Berners Roding
From 1 April 2027, VAT on heat pumps in homes rises from 0% to 5%. It’s a date to bear in mind when planning, though the right time also depends on your home and heating. A system that is left with a fault, or without a service, typically costs more to run.
One room or a whole building, we price it on the same basis: the work involved, the access and the equipment. The price is fixed before we start, and the quote sets out the VAT.
Why book with us
- Emergency calls taken 24/7
- Covering London and the South East
- Manufacturer’s warranty terms explained on your quote
- A fixed price before any work starts
Looking after your system
Looking after it is simple, and it helps at the next service:
- Use the settings explained at handover
- Clear leaves and debris from the outdoor unit
- Read the manufacturer’s warranty terms for your brand
Where we applied for a Boiler Upgrade Scheme grant, we keep you informed through the process, as the installer applies for it.
Don’t cover radiators with furniture or heavy curtains so the heat can get into the room.
What a heat pump looks like in Berners Roding
About 87% of households live in detached or semi-detached houses, according to Census 2021 figures. Houses usually have space for an outdoor unit and a hot water cylinder.
Every heat pump design starts with a room-by-room heat loss calculation. Older homes near Parish Church of St Christopher Willingale Doe may need extra checks for planning and heat loss before a heat pump is designed.
Berners Roding is about 8 miles west of Chelmsford, in Essex. Our engineers cover Berners Roding for air source heat pumps, along with the rest of Essex. In Essex alone we list 644 places, and Berners Roding is one. For properties nearby, see our London page, about 25 miles away.
Here we cover the CM5 postcode area. Close to Berners Roding, our area also takes in Willingale (1 mile south), Shellow Bowells (1 mile east), Margaret Roding (2 miles north), Radley Green (2 miles south-east) and Chalk End (2 miles north-east). Within a short drive, we also cover Chelmsford (8 miles east), Basildon (14 miles south-east), Braintree (14 miles north-east) and Harlow (8 miles west).
Landmarks near Berners Roding
In Berners Roding, that means homes and buildings near The Bell Public House. Nearby you’ll also find Willingale Doe (under half a mile east).
From one of our customers
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead