Oxfordshire · Heat pump installation
Air Source Heat Pumps in Berinsfield
Air source heat pumps in and around Berinsfield, from the first look to the final check with the price fixed before work begins.
- Radiators that may be too small for a heat pump
- Questions about listed buildings or conservation areas
- Plans to switch to electric heating with a heat pump
Heat pumps in Berinsfield: local notes
About 64% of households live in detached or semi-detached houses, according to the last census (2021). Houses normally have space for an outdoor unit and a hot water cylinder. About 48 miles out from central London, Berinsfield is part of the South East area we work across.
With Clifton Hampden Manor about 1.6 miles west, it’s worth asking whether your own home is listed before planning a heat pump. If your home is one of the older properties near Saint Mary and Saint Berin, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen.
Berinsfield is about 5 miles east of Abingdon-on-Thames, in Oxfordshire. Whether you’re in the middle of Berinsfield or further out, our engineers cover air source heat pumps, from small jobs to large ones. Across Oxfordshire, we cover 443 places, Berinsfield among them. You can also see our page for Guildford, roughly 39 miles from Berinsfield.
If your postcode is in OX10, we can take the job on. You will find streets such as Colwell Road, Lay Avenue and Abbey Woods Close, each of them within reach. If you are just outside Berinsfield, we cover Burcot (1 mile south-west), Dorchester (1 mile south), Drayton St Leonard (1 mile east), Marsh Baldon (2 miles north-west) and Little Wittenham (2 miles south). Within a short drive, we also cover Oxford (7 miles north-west), Didcot (5 miles south-west), Abingdon-on-Thames (5 miles west) and Thame (10 miles north-east).
Near you in Berinsfield
Locally, jobs take us to houses, flats and workplaces close to The Village Inn. For rail, the closest station is Culham station, about 2.8 miles west. Well-known places in the area include Aston Martin Heritage Trust Museum (1.6 miles east) and Littlemore Hospital (4.4 miles north-west). Open spaces near Berinsfield include Wells Farm and Wittenham Clumps.
About our air source heat pumps in Berinsfield
A heat pump takes heat from the outside air and moves it into your home with electricity running the compressor and fans. The technology is close to air conditioning, which is why we install both and the Energy Saving Trust notes that air-to-air heat pumps are sometimes referred to as air conditioning. If the problem is deciding on the outdoor unit position and radiators that may be too small for a heat pump, we can help.
In a place like Berinsfield, some homes are listed, because permitted development does not apply within the grounds of a listed building, so we check consent first.
For a fault on a system that may still be under warranty, send us the make, model and installation date. We’ll tell you how the manufacturer’s warranty is likely to apply before anything chargeable is done.
- Location
- Berinsfield (OX10)
- Wider area
- Oxfordshire
- Prices
- £8,000–£16,000 before the grant, 0% VAT on homes
- Pricing
- Fixed after a survey or pictures
- Approvals
- NICEIC and F-Gas, MCS
- Replies
- We reply the same working day
- Call
- 07833 053749
- Page updated
- 30 October 2026
FAQs for Berinsfield
Will you come out to Berinsfield?
Yes, and the size of the place makes no difference to how we work. We’re based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Can I get the Boiler Upgrade Scheme grant in Berinsfield?
Berinsfield is in England, where the Boiler Upgrade Scheme runs. It gives £7,500 towards an air-to-water or ground source heat pump, or £2,500 towards an air-to-air heat pump that replaces the fossil-fuel heating and meets the whole home’s heating need. The installer applies, and we’re MCS certified.
Will I need planning consent for an air source heat pump?
It depends on the property and where the unit goes. Flats have different limits, conservation areas have extra conditions, and an Article 4 direction can remove the rights, so we check during the survey.
Can I do the refrigerant work myself?
The refrigerant side has to be done by a qualified engineer working for an F-Gas certified company. That is a legal requirement, and it also matters for the manufacturer’s warranty. We can quote for the whole job, from supply to commissioning.
Which brands do you work with?
The main ones, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. For a new system, we suggest the make and model that suit the property and explain why.
Do you have a 24/7 line?
Yes. There’s a 24/7 emergency line for problems that cannot wait for a planned visit. Call 07833 053749 and tell us what’s happened.
Whose job is it to check the system for leaks?
The operator of the equipment, working with qualified engineers. Systems below 5 tCO2e fall outside the set leak check intervals, while larger ones need checks at least every 12 months, or every 6 months from 50 tCO2e. We will work out which band applies to yours.
What the work involves, system by system
Air-to-air heat pumps
The £2,500 grant for air-to-air applies only when the system replaces the fossil-fuel heating and covers the whole home’s demand. It must be installed by an MCS certified installer and be in a home.
Outdoor unit position and planning
Flats have tighter limits, and an Article 4 direction can remove permitted development rights. Listed building consent is a separate matter, and we check the position for your property.
Nearby places to Berinsfield
Also in Berinsfield
What we do, step by step
Anything involving refrigerant is handled by F-Gas qualified engineers, as the law requires, and electrical work is done by us as NICEIC approved contractors. So on the day, you do not need a separate electrician for the electrical side. The work takes from a couple of days to around a week, depending on the system and how much of the heating changes. We plan the trip to Berinsfield around you.
- It starts with a conversation about the home, the existing heating and your plans.
- A heat loss survey works out how much heat each room needs, and we look at the radiators, the cylinder space and where the outdoor unit could go.
- The price comes back fixed and in writing, with the grant and VAT shown line by line.
- We fit the outdoor unit and connect it to the heating, hot water and controls.
- We commission the heat pump, complete the MCS paperwork and talk you through the controls.
Preparing for the visit
- Find the manual or the paperwork for the system, if you have it
- Keep pets and children away from the work area
- Make sure someone can let us in at the agreed time
Get a fixed-price quote
Quoting starts with a diagnosis, from a site survey or, where the job is straightforward, from photos and measurements. Then you get a fixed price so you know the cost before we begin.
Related advice
Looking after it afterwards
Looking after the system is mostly common sense. A few tips:
- Check what your manufacturer’s warranty asks of you
- Keep the outdoor unit clear all year
- Check eligibility for the Boiler Upgrade Scheme early
The warranty on the heat pump is the manufacturer’s, on its own terms. We explain the terms for your brand, including any servicing conditions.
Leave space around the outdoor unit. Airflow is what it runs on so keep it unobstructed.
For landlords and property managers
Portfolio owners often want one contractor and one number. Our area covers Greater London and the South East, so work at different addresses can be planned together and kept on a regular cycle.
Landlords, letting agents and managing agents book us, not only the people who live or work in the property. Let us know who will give us access and who the records should go to and we will copy in whoever needs it.
From one of our customers
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead