West Berkshire · Heat pump installation
Air Source Heat Pumps in Benham Hill
For air source heat pumps in Benham Hill, choose an F-Gas certified, NICEIC approved company. A fixed price before any work starts, and a 24/7 emergency line.
- Working out where a cylinder could go
- Questions about the Boiler Upgrade Scheme
- Checking whether planning permission is needed
About our air source heat pumps in Benham Hill
Air source heat pumps collect heat from outdoor air and bring it inside, using electricity to drive the process. The technology is close to air conditioning, which is why we install both, and air-to-air heat pumps are sometimes simply called air conditioning. The work covers hot water cylinders, radiator systems and air-to-air heat pumps, and common reasons people get in touch are wanting to stop using oil, LPG or gas for heating and questions about listed buildings or conservation areas.
Older homes around Benham Hill can be draughty or have solid walls, so a proper heat loss calculation matters. Sometimes insulating first makes more sense.
Warranty on the equipment is the manufacturer’s own, on the manufacturer’s terms, and we set them out on your quote. Each brand sets its own conditions, and we are happy to talk you through them.
- Where
- Benham Hill (RG14, RG19, RG18)
- Region
- West Berkshire
- Pricing
- Fixed-price quote after a site survey
- Accreditations
- F-Gas certified company, NICEIC approved, MCS
- Guide price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Phone
- 07833 053749
- Updated
- 30 October 2026
Landlords, agents and facilities managers
For anyone managing more than one building, we can quote and plan the work across all of them. Each property gets its own records, so each one has its own history.
From a single flat to a whole estate, the approach is the same: a look at the job first, a fixed-price quote, work booked with the occupier and written records afterwards.
Looking after your system
After the visit, a few habits help:
- Avoid switching the heat pump on and off often
- Diary the next service
- File the MCS certificate safely
Should you have questions after the install, phone 07833 053749 and we’ll talk it through. A yearly service is a good habit.
Keep insulation and draught-proofing in good order, as lower heat loss means the system has less to do.
Homes in Benham Hill and heat pumps
At about 52 miles from central London, Benham Hill sits inside the area we cover across London and the South East.
If you live near Newbury Racecourse station, the survey compares air-to-water and air-to-air for your home before anything is quoted. Historic houses such as Shaw House, about 1.2 miles north-west, are a reminder that listed homes need consent before a heat pump goes in.
Benham Hill is about 1 mile east of Newbury, in West Berkshire. We cover Benham Hill for air source heat pumps, along with the rest of West Berkshire. Benham Hill is one of 155 places in West Berkshire we cover for homes and businesses. Guildford, roughly 33 miles off, has its own page on this site.
Local streets include Manor Lane, Arkle Avenue and Turnpike Road, and we cover them all. Our working area takes in RG14, RG19 and RG18. Places around Benham Hill that are also on our list: Stone Copse (1 mile north), Ashmore Green (1 mile north-east), Thatcham (1 mile east), Cold Ash (2 miles north-east) and Longlane (3 miles north). Further out, we also cover Burghfield Common (10 miles east), Hungerford (10 miles west), Spencers Wood (14 miles east) and Calcot (11 miles east).
Landmarks near Benham Hill
Typical jobs here are in properties near Victoria Park, The Swan pub and Trinity School and the streets around them. The nearest railway station is Newbury Racecourse station, roughly 0.8 miles south-west. A little further out are West Berkshire Community Hospital (under half a mile north) and Donnington Castle (2.2 miles north-west). Green spaces nearby include Nature Discovery Centre.
What the work involves, system by system
Heat loss surveys
We look at walls, windows, floors, roofs and ventilation along with the room sizes.
Outdoor unit position and planning
Under permitted development, the outdoor unit must be 1.5 m³ or less and must meet MCS 020(a) and not be used solely for cooling. Listed building curtilages are excluded.
Nearby places to Benham Hill
More services for Benham Hill
Common questions in Benham Hill
Is the heat pump grant available in Benham Hill?
Yes, if the home and the heat pump meet the scheme’s rules: Benham Hill is in England, where it applies. Whether your home qualifies, and for how much, depends on the type of heat pump and the heating it replaces. As an MCS certified installer, we apply for it on your behalf.
Will a heat pump in Benham Hill need planning permission?
It comes down to the building and the spot chosen for the outdoor unit. There’s a conservation area, the Newbury Town Centre Conservation Area, close to central Benham Hill. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit cannot face a road. Where necessary, we check with West Berkshire council, which is usually the planning authority for Benham Hill.
How soon will you get back to me?
On the same working day you contact us. After that, we agree a survey, diagnosis or installation date that suits you, with a fixed price before work starts.
Can you set up regular servicing?
Yes. We offer maintenance contracts, with visits at the interval your system and the manufacturer need. Each visit is written up and F-Gas records kept where they apply.
What’s the difference between air-to-water and air-to-air heat pumps?
Air-to-water feeds your central heating and hot water, while air-to-air warms and cools rooms directly. Air-to-air doesn’t heat hot water and the survey helps decide.
Can I fit air conditioning or a heat pump myself?
The refrigerant side has to be done by a qualified engineer working for an F-Gas certified company. That is the law, not just our preference, and it also matters for the manufacturer’s warranty. We’re happy to quote for the full job, supply to commissioning.
Can you come out in an emergency?
Yes, any time. For anything urgent, such as a system failing in a server room or water leaking from a unit, ring our 24/7 line and we’ll agree what happens next.
What happens on the day
On the day, we arrive at the time agreed with you and check the plan with you first. Floors and furniture near the work are covered with dust sheets, and anything electrical is made safe before work starts. The work itself takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. Around Benham Hill, access is typically simple, though gates and garden access are worth mentioning.
- We talk through your home, your current heating and what you want from a heat pump.
- On the visit we calculate what every room loses on a cold day, then check the radiators, room for a cylinder and outdoor unit options.
- The price comes back fixed and in writing, with the grant and VAT shown line by line.
- Fitting day: the outdoor unit is placed, the indoor side connected and the controls set up.
- Once it’s running correctly, the MCS certificate is issued and we show you the settings.
Preparing for the visit
- Mention any managing agent or landlord rules we need to follow
- Unlock any gate, garage or side passage we need
- Let us know where we can park and unload
Ask for a quote
To get a fixed-price quote, phone 07833 053749 or email us and tell us about the property and what you need. Photos help a lot. You will hear back from us the same working day.
Advice
A customer’s words
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead