Surrey · Heat pump installation
Heat pump installers in Whitmoor Vale
Expert air source heat pumps for Whitmoor Vale: diagnosis first, then a fixed-price quote, the work and written records. Call for a fixed-price quote.
- Comparing heat pump types
- Ageing boilers that will need replacing
- Questions about the Boiler Upgrade Scheme
Your questions about air source heat pumps in Whitmoor Vale
Does the Boiler Upgrade Scheme cover homes in Whitmoor Vale?
Yes, if the home and the heat pump meet the scheme’s rules: Whitmoor Vale is in England, where it applies. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. You do not apply yourself: the MCS certified installer does, which is us.
Is a heat pump in Whitmoor Vale permitted development?
There’s no single answer: the building and the outdoor unit position decide it. Around 3 listed entries sit within 0.5 miles of central Whitmoor Vale. The permitted development rules for heat pumps leave out listed buildings and stop outdoor units going on road-facing walls or roofs in conservation areas. Anything outside the rules needs an application, and we raise it with Waverley council, which is usually the planning authority for Whitmoor Vale first.
Why does F-Gas certification matter?
F-Gas certification shows a company is approved to work on equipment containing fluorinated gases, such as the refrigerant in air conditioning and heat pumps. In Great Britain, that certification is a legal requirement, not an optional extra, and we hold it.
Will skipping a service affect the warranty?
Check the manufacturer’s terms. Some manufacturers make regular servicing by a qualified engineer a condition of the warranty, so check the terms or ask us. Either way, keep a record of every service.
How does the warranty work?
The manufacturer provides it, on its own terms. Some terms depend on regular servicing by a qualified engineer so it’s worth keeping the service records.
When will I hear back?
You’ll hear from us the same working day. For a breakdown that can’t wait, call our 24/7 emergency line.
Will you work on another installer’s system?
Yes. We start with a proper look and tell you honestly what we find, including anything about the original installation that needs putting right. Any work is priced before it goes ahead.
About our air source heat pumps in Whitmoor Vale
We install air source heat pumps in Whitmoor Vale and across Surrey, and we’re MCS certified. Air-to-water systems feed your radiators or underfloor heating and hot water cylinder, while air-to-air systems heat rooms directly through indoor units and can cool them too. We help you work out which suits your home. The work covers air-to-water heat pumps, air-to-air heat pumps and underfloor heating, and common reasons people get in touch are planning and permitted development questions and a boiler that’s getting old.
Space for an outdoor unit is rarely an issue near Whitmoor Vale, so the design comes down to heat loss, radiators and hot water.
If a fault appears while the equipment is under the manufacturer’s warranty, tell us the make, model and installation date. We’ll tell you how the manufacturer’s warranty is likely to apply before any chargeable work goes ahead.
- Place
- Whitmoor Vale (GU26)
- Wider area
- Surrey
- Guide price
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Approvals
- NICEIC and F-Gas, MCS
- Price
- Fixed-price quote after a site survey
- Call
- 07833 053749
- Reviewed
- 30 October 2026
How it works
Each visit runs to the same pattern: check the plan with you, put the dust sheets down, do the work, check the system and talk you through it. On site, the work takes from a couple of days to around a week, depending on the system and how much of the heating changes. Photos of the existing unit help with repairs and servicing in Whitmoor Vale.
- First, a chat about the property and your goals for the heating.
- We survey for heat loss and look at radiators, cylinder space and outdoor unit options.
- You get our view on the right type for the house, and on whether the Boiler Upgrade Scheme applies.
- The system is installed and connected to the controls.
- We commission it, complete the MCS certificate and show you how to use it.
Preparing for the visit
- Tell us about access, such as roof hatches, high walls or locked plant areas
- Make sure we can reach the outdoor unit, or where it will go
- Tell us about parking and loading
How to get a quote
Our prices page gives typical ranges, but your quote is based on your job, because every property is different. After a look at the job, by photos or a survey, the price is fixed. To get going, give us a ring on 07833 053749 or use the quote form.
Related advice
How the job changes from property to property
Outdoor unit position and planning
Under permitted development, the outdoor unit must be 1.5 m³ or less and must meet MCS 020(a) and not be used solely for cooling. Listed building curtilages are excluded.
The Boiler Upgrade Scheme
Only one grant is available per property, and it cannot replace a low-carbon system, and hybrid systems are not eligible.
How we price air source heat pumps
The diagnosis comes before the price. We look at:
- A single visit or a regular plan
- Whether we need access equipment for high-level work
- The size of the job
Typical ranges are on our prices page, but your price depends on the job in front of us. Call for a fixed-price quote, and we will explain what it covers.
Helping us quote
When you call or email, these details help:
- The fuse board and where it is in the property
- Your installation or service records
- Photos showing the indoor unit and the space around it
If you need air source heat pumps in Whitmoor Vale, give us a ring on 07833 053749 or fill in the contact form. Tell us what kind of property it is and what you’d like done, and send a few pictures if you can. Enquiries get a reply the same working day.
Homes in Whitmoor Vale and heat pumps
About 73% of households live in detached or semi-detached houses, according to the last census (2021). Houses usually have space for an outdoor unit and a hot water cylinder.
Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler. Older homes near Church of St Luke may need extra checks for planning and heat loss before a heat pump is designed.
Whitmoor Vale is about 6 miles south of Farnham, in Surrey. Anywhere in GU26, our engineers can take on air source heat pumps. In Surrey alone we list 395 places and Whitmoor Vale is among them. Guildford, roughly 12 miles off, has its own page on this site.
Not far from Whitmoor Vale, a recent job of ours was on Petworth Road, Haslemere (GU27), about 3 miles south-east: installing a Mitsubishi Electric multi-split system serving the master bedroom, two further bedrooms and the basement games room.
Our engineers cover all of GU26 and the streets around it. From Whitmoor Vale Road and Whitmore Vale to the smaller roads in between, the whole area is covered. Close to Whitmoor Vale, our area also takes in Barford (1 mile north-west), Beacon Hill (1 mile east), Green Cross (1 mile north-east), Churt (1 mile north) and Grayshott (1 mile south-east). Further out, we also cover Guildford (12 miles north-east), Camberley (15 miles north), Farnham (6 miles north) and Frimley (13 miles north).
Near you in Whitmoor Vale
Locally, jobs take us to houses, flats and workplaces close to The Flashes, Woolmer Hill School and Crossways Inn and the streets around them. The nearest railway station is Haslemere station, roughly 3.3 miles south-east. Well-known places in the area include Haslemere and District Hospital (3.5 miles south-east). Not far away are Lynchmere Commons and Gibbet Hill.
Places near Whitmoor Vale
Also in Whitmoor Vale
For landlords and property managers
From a single flat to a whole estate, the approach is the same: a look at the job first, a fixed-price quote, work booked with the occupier and written records afterwards.
If you look after several properties, we can quote and plan the work across all of them. Every address has its own paperwork, so the files stay tidy.
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager