West Sussex · Heat pump installation

Heat pump installers in Rotherbridge

For air source heat pumps in Rotherbridge, one call is all it takes, from the first look to sign-off. An F-Gas certified company, NICEIC approved, on Checkatrade.

  • Comparing heat pump types
  • Questions about listed buildings or conservation areas
  • Ageing boilers that will need replacing

Air source heat pumps for Rotherbridge

Air source heat pumps in Rotherbridge, done properly

Many air source heat pumps can be installed as permitted development in England, without a planning application. Conditions include a maximum outdoor unit size of 1.5 m³, compliance with MCS 020(a), use for more than cooling alone and a site outside the curtilage of a listed building. We check the rules for your property as part of the survey. If the problem is working out whether radiators need upsizing and planning and permitted development questions, we can sort it out.

If your home in or near Rotherbridge is heated by oil, LPG or electric heaters with no mains gas, an extra £1,500 is available through the Boiler Upgrade Scheme until March 2027, on top of the £7,500.

If a fault appears while the equipment is under the manufacturer’s warranty, tell us the make, model and installation date. We’ll tell you how the manufacturer’s warranty is likely to apply before anything chargeable is done.

Where
Rotherbridge (GU28)
Region
West Sussex
Price
A fixed price before work begins
Approvals
F-Gas certified, NICEIC approved, MCS
Typical price
£8,000–£16,000 (0% VAT on homes), before the grant
Call
07833 053749
Updated
30 October 2026

System by system

Outdoor unit position and planning

Flats have tighter limits, and an Article 4 direction can remove permitted development rights. Listed buildings also need separate consent, and we check the position for your property.

VAT on heat pumps

HMRC says most air conditioning units are air source heat pumps, but each case depends on the facts and the VAT is confirmed on your quote.

How it works

The first job on site is protection: dust sheets over floors and furniture near the work, and we ask before moving anything. Then the electrics are made safe and the work begins. The work on site takes several days for an air-to-water system with a new cylinder, less for an air-to-air system, and we tidy up before we leave. If a lane or gateway near Rotherbridge is tight for a van, let us know and we will plan for it.

  1. You tell us about the home and what you want from a heat pump.
  2. A survey covers heat loss, radiators, hot water and where the outdoor unit could sit.
  3. We recommend air-to-water or air-to-air and check the grant position.
  4. The system is installed and connected to the controls.
  5. After commissioning, you get the MCS certificate and a handover.

How to prepare

  • Name a contact who can meet us at the agreed time
  • Unlock any gate, garage or side passage we need
  • Keep pets out of the rooms we are working in

Getting a quote

Photos are the fastest route to a quote: the inside and outside of the property where the work is, plus the rating plate of any unit already there. Add the address and what you’d like done, and simple jobs can often be priced without a visit.

Get a quick quote

Related advice

Common problems we fix in Rotherbridge

Many enquiries start with a question about the Boiler Upgrade Scheme. Whether you can get the grant depends on your home and the scheme conditions, so we check before you commit.

The things we are asked about most are:

  • Checking emitters for a heat pump
  • Not knowing whether a grant applies
  • Questions about where the outdoor unit can go

With Petworth House about 1.2 miles north-east, it’s worth asking whether your own home is listed before planning a heat pump.

What your quote should include

  • If the quote is based on a survey, photos or a diagnosis
  • What happens if the job turns out to be different on the day
  • Whether you get F-Gas records where refrigerant is involved

Choosing an air con installer

Common questions in Rotherbridge

Can I get the Boiler Upgrade Scheme grant in Rotherbridge?

Rotherbridge is covered, as the scheme runs across England and Wales. The grant is £7,500 for an air source (air-to-water) heat pump and £2,500 for an air-to-air system that replaces the existing fossil-fuel heating. You do not apply yourself: the MCS certified installer does, which is us.

Is Rotherbridge within the area you cover?

Yes, smaller places are covered as well as towns. A few photos and the postcode are enough to get things started.

What’s the price of a heat pump installation?

Air-to-water systems are £8,000–£16,000 (0% VAT on homes), before any grant. Your price depends on the survey, the emitters and the hot water, and you get a fixed-price quote.

Do you provide F-Gas records?

Yes, on every job. New installations come with commissioning details, F-Gas records and warranty information, while repairs and services get a written note of what was found and done.

Can I do any of the installation myself?

Not the refrigerant work. Under the F-gas rules, it must be done by qualified engineers from a certified company, and a new electrical circuit is notifiable building work unless a registered competent person does it.

Can you look at a system you didn’t fit?

Yes. Systems fitted by other companies are fine from all the leading brands. Tell us the make and model and send any paperwork you have.

Which accreditations do you hold?

F-Gas certified, NICEIC approved and MCS certified for heat pumps, plus Checkatrade membership. Engineers who handle refrigerant hold their own F-gas qualifications as well.

Air source heat pumps in Rotherbridge: the local picture

About 43% of homes across Rotherbridge and its surrounding area were built before 1919, according to VOA council tax data, and about 73% of households live in detached or semi-detached houses, according to Census 2021 figures. Period properties can still suit a heat pump, but the design has to start from accurate heat loss figures. Houses typically have space for an outdoor unit and a hot water cylinder. Draw a one-mile circle round the middle of Rotherbridge and it takes in 2 conservation areas. So the heat pump survey asks two extra questions here: is the home listed, and is it inside a conservation area?

If your home is one of the older properties near The Parish Church of All Hallows, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen.

Rotherbridge is about 8 miles south-west of Billingshurst, in West Sussex. For air source heat pumps in and around Rotherbridge, please give us a ring on 07833 053749 or use the quote form for a fixed-price quote. We work across London and the South East, including Rotherbridge. Our West Sussex coverage runs to 371 places, Rotherbridge among them. You can also see our page for Worthing, roughly 14 miles from Rotherbridge.

The closest recent job we can point to from Rotherbridge was on Lower Street, Pulborough (RH20), about 5 miles east: installing a Daikin multi-split system serving the restaurant dining area, the private function room and the bar area as part of a major refurbishment programme.

Work in GU28 follows the same survey, fixed-price quote and written records as everywhere else we cover. From Kilsham Lane and Rotherbridge Lane to the smaller roads in between, nowhere is left out. If you’re just outside Rotherbridge, we cover Petworth (1 mile north-east), Haslingbourne (1 mile east), Tillington (1 mile north), Upperton (2 miles north) and Hampers Green (2 miles north-east). Further out, we also cover Horsham (15 miles north-east), Worthing (14 miles south-east), Bognor Regis (13 miles south) and Chichester (11 miles south-west).

What’s near Rotherbridge

Rotherbridge’s nearest station is Pulborough station, about 4.8 miles east of the centre. A little further out are Lodsworth Castle (2.1 miles west) and Coultershaw Heritage Site (0.5 miles south-east). Green spaces nearby include Bignor Hill and Graffham Common.

Map of Rotherbridge © OpenStreetMap contributors

Aftercare tips

To keep the system working properly:

  • Let the heat pump run steadily, as set up at handover
  • Check what your manufacturer’s warranty asks of you
  • Store the MCS certificate and warranty documents together

The warranty on the heat pump is the manufacturer’s, on its own terms. We explain the terms for your brand, including any servicing conditions.

Heat pumps prefer steady, low-temperature running, using the settings agreed at handover.

From one of our customers

“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”

David W., Haywards Heath

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead