Kent · Heat pump installation
Heat pump installers in Martin Mill
Air source heat pumps in Martin Mill from an F-Gas certified company, with warranty terms explained brand by brand. Enquiries answered the same working day.
- Moving away from fossil-fuel heating
- Not knowing whether a grant applies
- Ageing boilers that will need replacing
Aftercare tips
Once we’ve finished, these simple steps help:
- Seal draughts where you can
- Check what your manufacturer’s warranty asks of you
- Use the settings explained at handover
Should you have questions after the install, call us on 07833 053749 and we’ll look into it. Annual servicing helps keep the system working well.
Keep insulation and draught-proofing in good order, as lower heat loss means the system has less to do.
Air source heat pumps in Martin Mill, done properly
For an air-to-water heat pump, the price is £8,000–£16,000 (0% VAT on homes), before the grant. In England and Wales, the Boiler Upgrade Scheme offers a £7,500 grant towards an eligible air-to-water installation and the installer makes the application. Eligibility depends on the property, so we confirm it before anything is agreed. The work covers radiator systems, air-to-water heat pumps and underfloor heating, and people most often call us about moving away from fossil-fuel heating and checking eligibility for a heat pump grant.
Homes around Martin Mill typically have room outside for a heat pump, so the design focuses on heat loss and radiators.
Warranty periods vary by brand and by product. Daikin, for example, gives a standard 2 years on split air conditioning, with longer extensions only on its air-to-water heat pumps. Whatever the brand, the manufacturer’s terms are explained on your quote.
- Location
- Martin Mill (CT15)
- Region
- Kent
- Quotes
- Fixed, in writing
- Accreditations
- NICEIC approved, F-Gas certified, MCS
- Guide price
- £8,000–£16,000 (0% VAT on homes), before the grant
- Call
- 07833 053749
- Reviewed
- 30 October 2026
How the job changes from property to property
VAT on heat pumps
HMRC says most air conditioning units are air source heat pumps, but each case depends on the facts, so we confirm the VAT on your quote.
Radiators and underfloor heating
At lower water temperatures, radiators give out less heat so we check them against each room’s heat loss.
How it works
The first job on site is protection: sheets over the floor and any furniture nearby, and we ask before moving anything. Then the electrics are made safe and the work begins. The work on site takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes, and we tidy up before we leave. We plan the trip to Martin Mill around you.
- It begins with your house and the heating it relies on now.
- A heat loss survey is carried out, room by room.
- We design the system, check the radiators and cylinder and look at the outdoor unit position.
- You get a fixed price, with any grant and the VAT set out.
- Then it’s fitted, commissioned and registered with MCS.
Before we arrive
- Clear access to the fuse board
- Mention any parking restrictions near the property
- Find the manual or the paperwork for the system, if you have it
Getting a quote
Getting a quote is straightforward. Call or email with a few details and we will come back to you the same working day. Where a survey is needed, we arrange a time that suits you.
Read more
What a heat pump looks like in Martin Mill
Martin Mill is within about 2 miles of the coast. Coastal sites are worth mentioning at the survey, as salt air affects the outdoor unit and its fixings. The last census (2021) found about 82% of households in detached or semi-detached houses. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these. Central Martin Mill is inside a conservation area. That affects heat pumps: listed buildings need consent, and conservation areas limit where the outdoor unit can go under permitted development. Where necessary, we check with the local planning authority (typically Dover council).
If your home is listed, like Walmer Castle about 3.1 miles north-east, listed building consent comes before any heat pump work.
Martin Mill is about 3 miles north-east of Dover, in Kent. Properties in Martin Mill get the same service as everywhere we cover: a look at the job first, a fixed-price quote and written records at the end. Our area takes in 922 places across Kent. Eastbourne, roughly 53 miles off, has its own page on this site.
Here we cover the CT15 postcode area. Station Road, Barley Close and Lucerne Lane and the roads off them are all inside our area. Close to Martin Mill, our area also takes in Martin (1 mile north-west), East Langdon (1 mile west), West Cliffe (1 mile south), West Langdon (1 mile north-west) and Ringwould (1 mile north-east). Larger places within reach include Canterbury (14 miles north-west), Margate (15 miles north), Dover (3 miles south-west) and Folkestone (10 miles south-west).
Local landmarks in Martin Mill
Typical jobs here are in properties near Duke of York's Royal Military School and The Lantern Inn and the streets around them. There’s a railway station in Martin Mill itself: Martin Mill station. Nearby you will also find Royal Victoria Hospital (3.4 miles south-west) and Dover Castle (3.1 miles south). Green spaces nearby include Dover Western Heights.
Places near Martin Mill
More services for Martin Mill
FAQs for Martin Mill
Does sea air affect air conditioning in Martin Mill?
It can. Martin Mill is within about 2 miles of the coast, and salt air speeds up corrosion on outdoor units. The outdoor unit position, its fixings and regular servicing all help near the sea.
Will you come out to Martin Mill?
Yes. Martin Mill is within the area we cover across London and the South East. Visits to smaller places are planned so the engineer arrives with what the job needs.
Should I choose air-to-water or air-to-air?
Air-to-water heats radiators or underfloor heating and hot water; air-to-air heats rooms through indoor units and can cool them. With air-to-air, hot water needs another source and the survey helps decide.
How long will it take to install a heat pump?
As a guide, it takes a few days on site, depending on the cylinder, the radiators and the pipework involved. We plan the work so you are without heating for as little time as possible, and we explain it in advance.
Do I need new radiators for a heat pump?
We find out during the survey. Rooms where the radiator is big enough stay as they are, and any that need upsizing are set out in the quote.
How does the warranty work?
The manufacturer provides it, on its own terms. Some brands make regular servicing a condition, so keep your service records.
Will I need planning consent for an air source heat pump?
Under the Planning Portal rules, a heat pump on a house can often be permitted development. Listed buildings and their curtilages are excluded, and listed building consent is a separate matter, so we check for your property.
Do you need air source heat pumps in Martin Mill?
Some homes heated by electric heaters or storage heaters consider a heat pump instead. The survey tells you whether it’s practical and what’s involved along with whether any grant could apply.
What we’re most often called about:
- Finding a place for the outdoor unit
- Deciding which kind of heat pump suits the home
- Not knowing whether a grant applies
If your home is near Martin Mill station and heated by a gas boiler, an air-to-water heat pump can replace it where the survey shows it suits.
What to look for in a quote
- What the manufacturer’s warranty covers and for how long
- Whether they hold F-Gas company certification, not just individual qualifications
- What’s in the price and what isn’t
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager