Kent · Heat pump installation

Heat pump installers in Maltman's Hill

Air source heat pumps in Maltman's Hill from an F-Gas certified company, with warranty terms explained brand by brand. Enquiries answered the same working day.

  • No space for a hot water cylinder
  • Questions about where the outdoor unit can go
  • Planning and permitted development questions

Air source heat pumps near Maltman's Hill

About our air source heat pumps in Maltman's Hill

Heat pumps run at lower flow temperatures than most boilers which means some radiators may need upsizing. We check each radiator against the room’s heat loss and anything that needs changing is in the quote. The work covers radiator systems, air-to-air heat pumps and underfloor heating, and the jobs we see most are choosing between air-to-water and air-to-air and planning and permitted development questions.

Space for an outdoor unit is rarely an issue near Maltman's Hill, so the design comes down to heat loss, radiators and hot water.

Looking after a system is mostly common sense: clear space around the outdoor unit, the cleaning the manual describes and a service at the recommended interval. It also keeps you on the right side of any warranty terms that ask for servicing.

Place
Maltman's Hill (TN27)
Region
Kent
Guide price
£8,000–£16,000 before the grant, 0% VAT on homes
Quote
Fixed-price quote after a site survey
Certified
F-Gas certified company, NICEIC approved, MCS
Telephone
07833 053749
Last updated
30 October 2026

Air source heat pumps around Maltman's Hill

About 75% of households live in detached or semi-detached houses, according to Census 2021 figures. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these. Maltman's Hill’s centre falls inside a designated conservation area. About 8 listed entries lie within half a mile of central Maltman's Hill, Hodge Farm Cottages (grade II) among them. For a heat pump, permitted development does not apply within the grounds of a listed building, and in a conservation area the outdoor unit cannot go on a wall or roof facing a road, so we check with Ashford council, typically the planning authority here where necessary.

Godinton House, roughly 5 miles east, is a reminder to check your home’s listing status: permitted development doesn’t cover listed buildings. Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler.

Maltman's Hill is about 6 miles west of Ashford, in Kent. Anywhere in TN27, we can help with air source heat pumps. Count every place we list in Kent and you reach 922, with Maltman's Hill on the list. Eastbourne is in our area too, about 32 miles from Maltman's Hill.

Not far from Maltman's Hill, a recent job of ours was on Mermaid Street, Rye (TN31), about 14 miles south: installing three Fujitsu wall-mounted units in guest bedrooms, with the outdoor units positioned in the hotel’s walled rear garden.

Our working area takes in TN27. Neighbouring places we cover include Wissenden (1 mile south), Chambers' Green (1 mile east), Pluckley Thorne (2 miles north-east), Fir Toll (2 miles north-east) and Newland Green (2 miles north). We also work in nearby towns such as Maidstone (11 miles north-west), Ashford (6 miles east), Sittingbourne (13 miles north) and Faversham (13 miles north-east).

Near you in Maltman's Hill

For rail, the closest station is Pluckley station, roughly 1.2 miles east. Well-known places in the area include Romden Castle (0.7 miles south-west).

Map of Maltman's Hill © OpenStreetMap contributors

Questions from Maltman's Hill

Is Maltman's Hill within the area you cover?

We do. Villages and hamlets get the same service as the bigger towns. Visits to smaller places are planned so the engineer arrives with what the job needs.

Is the heat pump grant available in Maltman's Hill?

Yes, if the home and the heat pump meet the scheme’s rules: Maltman's Hill is in England, where it applies. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. The installer applies, and we’re MCS certified.

Can I do the refrigerant work myself?

The refrigerant side has to be done by a qualified engineer working for an F-Gas certified company. That’s a legal requirement, and manufacturers expect it for their warranty too. We’re happy to quote for the full job, supply to commissioning.

How soon will you get back to me?

On the same working day you contact us. After that, we agree a survey, diagnosis or installation date that suits you, and you get a fixed price before any work goes ahead.

Which accreditations do you hold?

AirCon Doctor is an F-Gas certified company, NICEIC approved for electrical work and MCS certified for heat pumps. We’re also Checkatrade members.

Do you survey before quoting?

Yes. For simple jobs, photos and a few details can be enough, while larger systems and faults that need testing are seen on site.

Do I need new radiators for a heat pump?

It varies from room to room. We check them all during the survey, so the quote covers any changes.

The process

The visit goes in the diary at a time that works for you, and we keep you posted if anything changes. When we arrive, we check the job against the survey or the pictures you sent. If something is different, we talk it through with you before carrying on. From there, the work takes from a couple of days to around a week, depending on the system and how much of the heating changes. For a place like Maltman's Hill, the timing is set with you and the travel is our side of the planning.

  1. We start with your plans and the property.
  2. We survey for heat loss and look at radiators, cylinder space and outdoor unit options.
  3. We explain which type of heat pump suits the home and whether a grant could apply.
  4. We install the heat pump and connect it up.
  5. We commission it, complete the MCS certificate and show you how to use it.

Before we arrive

  • Keep pets out of the rooms we are working in
  • Mention any roof access, ladders or high-level work
  • Tell us about parking and loading

Getting a price

Photos are the fastest route to a quote: the room or the existing unit, the outside wall or roof where the outdoor unit sits or would go, and the label on any existing unit. Add the address and what you’d like done, and simple jobs can often be priced without a visit.

Get a price

Read more

Let and managed properties

We regularly work with managing agents. Send the address, what’s needed and how access works, and we’ll send a fixed-price quote.

Bigger systems bring extra duties: a TM44 inspection by an accredited energy assessor is required at least every 5 years for systems over 12 kW. We arrange the inspection, get the system ready and put right anything it picks up.

Safe owner checks

Before you call us about a fault, a few checks can save a visit: check the mode, the set temperature, the remote’s batteries and the breaker. If a breaker trips again after you reset it, leave it off and call 07833 053749 or write to us at info@aircondoctor.co.uk.

Keep a note of anything odd: error codes, noises, drips, smells or a drop in performance. It helps us diagnose quickly, and a photo of the display helps even more.

What affects the cost of air source heat pumps

The quote reflects the job in front of us. We take into account:

  • What kind of system it is
  • The distance and route between the indoor and outdoor units
  • Whether the existing supply is suitable

A single unit or a whole estate, we price it on the same basis: what needs doing, how we get to it and what it needs. The price is fixed before work begins, with VAT shown clearly.

Asking for a quote

What to send for a quote:

  • A short video of any fault, such as a noise or a flashing light
  • The address and the type of property
  • Any previous service or F-Gas records

For air source heat pumps in Maltman's Hill, give us a ring on 07833 053749 or send an email. Let us know the type of property and what you need, plus some photos if they’re to hand. Enquiries get a reply the same working day.

A customer’s words

“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”

David W., Haywards Heath

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead