Kent · Heat pump installation
Air Source Heat Pumps in Lydden
Air source heat pumps for Lydden, from F-Gas certified engineers, with warranty terms explained brand by brand. Enquiries answered the same working day.
- Choosing between air-to-water and air-to-air
- Working out where a cylinder could go
- Checking eligibility for a heat pump grant
Air source heat pumps in Lydden
Air-to-air heat pumps can qualify for a £2,500 Boiler Upgrade Scheme grant, but only in some cases. The system must replace the existing fossil-fuel heating and meet the home’s full heating demand, it must be installed by an MCS certified installer, and it must be in a home, so an add-on next to a boiler is not eligible. Typical jobs include finding a place for the outdoor unit and ageing boilers that will need replacing, across air-to-water heat pumps, radiator systems and underfloor heating.
Homes around Lydden normally have room outside for a heat pump, so the design focuses on heat loss and radiators.
Any work on the refrigerant circuit is recorded: what was done, the refrigerant type and any amount added or recovered. Keep the records with the manual and the warranty documents, ready for the next service or a warranty query.
- Where
- Lydden (CT15)
- Region
- Kent
- Quotes
- Fixed-price quote after a site survey
- Costs
- £8,000–£16,000 before the grant, 0% VAT on homes
- Certified
- NICEIC and F-Gas, MCS
- Telephone
- 07833 053749
- Updated
- 30 October 2026
Air source heat pumps in Lydden: the local picture
The 2021 Census found about 76% of households in detached or semi-detached houses. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
A heat loss calculation decides the size of heat pump your home needs. Older homes near Church of St Mary Church of St Mary Virgin may need extra checks for planning and heat loss before a heat pump is designed.
Lydden is about 3 miles north-west of Dover, in Kent. Our engineers cover Lydden for air source heat pumps and across the rest of Kent. Our area takes in 922 places across Kent, from busy centres to quieter spots. Eastbourne, roughly 49 miles off, has its own page on this site.
Local streets include St Marys Rise, Canterbury Road and The Close, all of which are in our area. All of CT15 is covered. We also cover the places around Lydden: Coldred (1 mile north), Ewell Minnis (1 mile south-west), Temple Ewell (1 mile south-east), Halfway Street (1 mile north-west) and Wolverton (2 miles south). We also work in nearby towns such as Canterbury (11 miles north-west), Dover (3 miles south-east), Folkestone (6 miles south-west) and Ramsgate (14 miles north-east).
Around Lydden
Typical jobs here are in properties near Sladden Wood and Hope Inn. For rail, the closest station is Kearsney station, about 1.6 miles south-east of the centre. Well-known places in the area include Dover Transport Museum (2.3 miles south-east) and Dover Castle (4.3 miles south-east). The countryside around Lydden includes Dover Western Heights.
What else we do in Lydden
Fixed-price quotes for air source heat pumps in Lydden
Typical ranges are on our prices page, but every job is priced on its own. The quote depends on:
- The size of the job
- Which make and model is being fitted or worked on
- How easy the units are to reach
Height, access and the distance between the indoor and outdoor units can all change the price. Each of those is built into the quote, and the price is fixed before we start.
What to send for a quote
To help us quote quickly, send us:
- Any previous service or F-Gas records
- Where the property is and what kind of building it is
- Any error code or flashing light on the display
Every quote shows the VAT clearly, and the rate that applies to your job is stated. VAT can differ between homes and businesses and between kinds of work, so we confirm it in writing rather than guess. For a fixed-price quote, call us on 07833 053749 or send an email.
What happens on the day
Where something has to be switched off during the work, we agree it with you first so it does not catch you out. For businesses, we can normally work room by room or zone by zone. On site, it takes a few days on site, depending on the cylinder, the radiators and the pipework involved. For a village like Lydden, tell us about narrow lanes, gates and parking when you book.
- First we talk through the property and the current system.
- We measure heat loss for every room.
- We design the system, check the radiators and cylinder and look at the outdoor unit position.
- A fixed-price quote explains the cost, the grant position and the VAT.
- Then it’s fitted, commissioned and registered with MCS.
Before we arrive
- Make sure we can reach the outdoor unit, or where it will go
- Mention any managing agent or landlord rules we need to follow
- Let us know where the consumer unit is
Getting a quote
Getting a quote is straightforward. Call or email with a few details and we’ll come back to you the same working day. If we need to see the property first, we book a survey at a time that works for you.
Read more
Managing agents and facilities teams in Lydden
Keeping records across a portfolio is half the battle. Each visit produces a dated record, plus the F-Gas records where refrigerant is involved, so you can show what was done and when.
For anyone managing more than one building, we can quote and plan the work across all of them. Every address has its own paperwork, so each one has its own history.
Common questions in Lydden
Can I fit a heat pump in Lydden without planning permission?
It depends on the property. Central Lydden sits inside a conservation area. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with the planning department at Dover council, normally the authority for Lydden.
Does the Boiler Upgrade Scheme cover homes in Lydden?
Lydden is in England, where the Boiler Upgrade Scheme runs. The amount depends on the type of heat pump, and the survey confirms which applies. We hold MCS certification, so the application is ours to make for you.
What accreditations do you have?
F-Gas company certification, NICEIC approval for electrical work and MCS certification for heat pumps, plus Checkatrade membership. Our engineers also hold the individual F-gas qualifications needed to work on refrigerant.
Can I do the refrigerant work myself?
The refrigerant side has to be done by a qualified engineer working for an F-Gas certified company. That’s a legal requirement, and it also matters for the manufacturer’s warranty. We can quote for the whole job, from supply to commissioning.
Which brands do you work with?
The main ones, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. For a new system, we suggest the make and model that suit the property and tell you why.
Will my radiators work with a heat pump?
We find out during the survey. Where a radiator is already large enough, it stays, and any that need upsizing are set out in the quote.
Do you look at the job first?
Yes, always. Diagnosis comes before treatment: the survey tells us what the job needs and how to do it and the fixed price is built on it.
What air conditioning won’t do
We won’t sell you work that doesn’t address the problem, so these are the things it will not cover:
- Disconnecting or servicing a gas boiler
- Formal advice on VAT for your situation
- Draught-proofing and insulation upgrades
If in doubt, phone 07833 053749, or email if that’s easier and we’ll say what we think.
Where we work
- Air-to-water heat pumps
- Radiator systems
- Underfloor heating
- Homes heated by oil, LPG or gas
- Hot water cylinders
- Air-to-air heat pumps
From one of our customers
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath