Essex · Heat pump installation
Layer Marney air source heat pumps
F-Gas certified and NICEIC approved, we cover Layer Marney for MCS certified installation of air source heat pumps for heating and hot water, with the Boiler Upgrade Scheme grant applied for. Fixed-price quotes and a 24/7 emergency line.
- Checking eligibility for a heat pump grant
- Moving away from fossil-fuel heating
- An oil, LPG or gas boiler near the end of its life
Rented and managed buildings
Portfolio owners often want one contractor and one number. Our area covers Greater London and the South East, so work at different addresses can be planned together and kept to a regular schedule.
Landlords, letting agents and managing agents book us, not only the people who live or work in the property. Tell us who the contact on site is and who should receive the paperwork, and we’ll keep everyone informed.
Air source heat pumps in Layer Marney, done properly
Hot water from an air-to-water system is stored in a cylinder. Homes with a combi boiler may not have a cylinder, so finding space for one is part of the survey. With air-to-air, hot water has to come from something else. Common call-outs are for choosing between air-to-water and air-to-air and moving away from fossil-fuel heating, across radiator systems, air-to-air heat pumps and hot water cylinders.
Older and listed homes in villages like Layer Marney need extra care, and permitted development does not cover listed buildings, so consent comes first.
For a fault on a system that may still be under warranty, send us the make, model and installation date. We’ll tell you how the manufacturer’s warranty is likely to apply before any chargeable work goes ahead.
- Place
- Layer Marney (CO5)
- Wider area
- Essex
- Price guide
- £8,000–£16,000 before the grant, 0% VAT on homes
- Price
- A fixed-price quote up front
- Credentials
- NICEIC approved, F-Gas certified, MCS
- Response
- Same working day
- Call
- 07833 053749
- Last updated
- 30 October 2026
Towns and villages near Layer Marney
More services for Layer Marney
What you can do yourself, and what needs us
Write down what you notice: an error code, a new noise, a drip, a smell or a change in how well the system heats or cools. It makes our diagnosis quicker, and a photo or a short video of the display is even better.
For air conditioning, cleaning the indoor unit’s filters is the main job owners can do, if the manual says so. They come out, get a gentle clean and go back only when they’re dry. For a heat pump, the main owner jobs are a clear outdoor unit and sensible control settings.
What we are called out for in Layer Marney
Some people want to move away from burning fossil fuels at home. With a heat pump, the heat comes from the air outside and the system runs on electricity and that’s the appeal for many households.
If any of these sounds familiar, it’s worth a diagnosis:
- Radiators that may be too small for a heat pump
- Checking whether planning permission is needed
- Questions about the Boiler Upgrade Scheme
Historic houses such as Layer Marney Tower, about 0.4 miles south, are a reminder that listed homes need consent before a heat pump goes in.
Questions to ask before booking
- The make and model of any parts or equipment being quoted
- Who does the electrical work, and whether they can certify it
- What paperwork you will receive afterwards
What we do, step by step
There’s very little for you to do on the day. Someone needs to let us in and show us the units, or where they’re going, and the rest is down to us. Before we leave, the area is tidied and we explain what we have done. For a place like Layer Marney, the timing is set with you and the travel is our side of the planning.
- It begins with your house and the heating it relies on now.
- A heat loss survey is carried out, room by room.
- From those figures we size the heat pump and decide on radiators, cylinder and outdoor position.
- You get a fixed price, with any grant and the VAT set out.
- We install, commission and register the system under MCS.
Preparing for the visit
- Have the make and model of any existing unit to hand
- Clear the space around the indoor unit, or where it will go
- Let us know where the consumer unit is
Getting a price
Some jobs can be priced from pictures, while others need a survey. Multi-room systems, commercial buildings and anything with a long or hidden pipe route are normally surveyed first. Either way, you get a fixed price before any work is booked.
Related advice
Air source heat pumps in Layer Marney: the local picture
About 11 listed entries lie within half a mile of central Layer Marney, Layer Marney Tower (grade I) among them. So the heat pump survey asks two extra questions here: is the home listed, and is it inside a conservation area? About 90% of households live in detached or semi-detached houses, according to Census 2021 figures. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
Live in one of the older houses around Church of St Mary the Virgin? Expect the survey to look closely at heat loss and at the building’s planning status.
Layer Marney is about 6 miles south-west of Colchester, in Essex. Properties in Layer Marney get the same service as everywhere we cover: diagnosis first, a fixed price and proper paperwork when we’ve finished. Our list for Essex has 644 entries and Layer Marney is among them. There’s also a page for London, about 44 miles away.
Jobs in CO5 are looked at, quoted and booked the same way as anywhere else. We also cover Messing (2 miles west), Easthorpe (2 miles north-west), Tiptree (2 miles south-west), Mulberry Green (2 miles north) and Windmill Hill (3 miles west). Within a short drive, we also cover Colchester (6 miles north-east), Chelmsford (15 miles south-west), Braintree (11 miles west) and Clacton-on-Sea (15 miles east).
Near you in Layer Marney
The closest station to Layer Marney is Marks Tey station, about 3.6 miles north of the centre. Well-known places in the area include Birch Castle (1.4 miles north-east) and Anchor Press Museum (2.1 miles south-west). Green spaces nearby include Oxley Meadow.
Questions from Layer Marney
Will you come out to Layer Marney?
Yes. Layer Marney is within the area we cover across London and the South East. Visits to smaller places are planned so the engineer arrives with what the job needs.
Is the heat pump grant available in Layer Marney?
Yes, the scheme covers homes in England, including Layer Marney, if they qualify. The amount depends on the type of heat pump, and the survey confirms which applies. The installer applies, and we are MCS certified.
Can you come out in an emergency?
Yes, 24/7. Call the emergency line and tell us the make, the symptoms and any error code, and we will talk you through the next steps.
How soon will you get back to me?
We reply to enquiries the same working day. If it’s an emergency, ring the 24/7 line instead.
What accreditations do you have?
We’re an F-Gas certified company, with NICEIC approval for electrical work and MCS certification for heat pumps. We are also Checkatrade members.
Do you work on systems someone else installed?
Yes. Systems fitted by other companies are fine, on all the main brands. Send us the make and model, and any records you have.
Can I do any of the installation myself?
No, not the refrigerant side. Under the F-gas rules, it must be done by qualified engineers from a certified company, and a new circuit is notifiable under Part P unless a registered electrician, such as a NICEIC approved contractor, does it.
A customer’s words
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead