Greater London · Heat pump installation
Heat pump installation in Hyde farm estate, Greater London
We cover Hyde farm estate for MCS certified installation of air source heat pumps for heating and hot water, with the Boiler Upgrade Scheme grant applied for. Diagnosis first, a fixed price and proper paperwork when we finish.
- Finding a place for the outdoor unit
- Wanting to stop using oil, LPG or gas for heating
- Working out where a cylinder could go
How it works
The first job on site is protection: sheets over the floor and any furniture nearby, and we ask before moving anything. Then the electrics are made safe and the work begins. It takes a few days for most air-to-water installations, with air-to-air systems often quicker, and we clear up before we go. Before a visit in Hyde farm estate, we ask where the van can stop and how we reach the outdoor unit.
- You tell us about the home and what you want from a heat pump.
- The survey checks heat loss, emitters, hot water and the outdoor unit position.
- We explain which type of heat pump suits the home and whether a grant could apply.
- Installation follows on the agreed dates.
- After commissioning, you get the MCS certificate and a handover.
Before we arrive
- Let us know where we can park and unload
- Arrange for someone to be there to let us in
- Let us know where the consumer unit is
Getting a quote
Want a quote for air source heat pumps? Please call 07833 053749 or use the quote form with a few details about the property. We’ll talk you through the options and give you a fixed-price quote before anything is booked.
Related advice
Air source heat pumps in Hyde farm estate
Installing an air source heat pump in a home is zero-rated for VAT until 31 March 2027, then 5%. That follows HMRC Notice 708/6, and it does not apply to businesses, and for air-to-air systems we confirm the VAT on your quote. Please treat this as general information rather than tax advice. The work covers radiator systems, homes heated by oil, LPG or gas and air-to-water heat pumps, and common reasons people get in touch are finding a place for the outdoor unit and choosing between air-to-water and air-to-air.
Homes in Hyde farm estate are often flats and terraces, where outside space is limited, which affects which heat pump suits. An air-to-water system needs space outside and typically a hot water cylinder inside, while air-to-air units take less room.
Aftercare is simple, and most of it is in the manual: clear space around the outdoor unit, the cleaning the manual describes and a service at the recommended interval. It also keeps you on the right side of any warranty terms that ask for servicing.
- Where
- Hyde farm estate (SW12, SW2, SW4)
- Wider area
- Greater London
- Price
- A fixed price before we start
- Prices
- £8,000–£16,000 (0% VAT on homes), before the grant
- Approvals
- NICEIC approved, F-Gas certified, MCS
- Telephone
- 07833 053749
- Updated
- 30 October 2026
What affects the quote in Hyde farm estate
A fixed price needs a few facts first. We check:
- The number of rooms, units or zones
- Which make and model is being fitted or worked on
- Whether it’s a one-off job or part of a maintenance contract
The pipe route, the height of the units and how we reach them can all change the price. We take each of them into account and give you a fixed price before any work starts.
What we need to know
A few details help us quote accurately. When you get in touch, it helps to send:
- A close-up of the unit’s label showing the model number
- The remote or wall controller showing any error
- Wide pictures of the room or the existing unit
To help us quote: the address and the type of property, pictures of the rooms or units, the brand and model of anything already fitted and any symptoms, from error codes to drips. Then phone us on 07833 053749 or email us.
What the work involves, system by system
Heat loss surveys
The survey works out the heat needed room by room. Everything else is sized from it.
Air-to-water heat pumps
Flow temperatures are lower than with a typical boiler, so radiator sizes matter.
Why deal with it now?
Choosing between air-to-water and air-to-air is easier with the facts. Air-to-water heats radiators and hot water, and can attract a £7,500 grant where eligible; air-to-air heats and cools rooms, and only qualifies for £2,500 under strict conditions, and we explain which fits your home. In London, hot spells can bring a rush of calls, so planning the work in Hyde farm estate before summer avoids the wait.
No two properties are the same, so we price each one individually. The equipment, how we reach it, the route between units and the work needed all play a part.
What you get with us
- A site survey and a fixed-price quote
- Warranty terms set out brand by brand
- Members of Checkatrade
- 24/7 emergency line for breakdowns
See our cost guide and how to check a contractor.
Places near Hyde farm estate
Other services in Hyde farm estate
Heat pumps in Hyde farm estate: local notes
About 48% of homes in Hyde farm estate and the neighbourhoods around it were built before 1919, according to Valuation Office Agency council tax records, and about 75% of households live in flats, according to the 2021 Census. Period properties can still suit a heat pump, but the design has to start from accurate heat loss figures. In flats, space for an outdoor unit and a cylinder can be limited, and the lease and freeholder come into it, so air-to-air is sometimes the better fit. In London, outside space and the rules for flats often decide which kind of heat pump suits.
For a home near Balham station, the survey looks at whether an air-to-water or air-to-air heat pump suits better. With Kingswood House about 2.6 miles east, it’s worth asking whether your own home is listed before planning a heat pump.
Hyde farm estate is about 1 mile north of Streatham, in Greater London. Wherever you are in the SW12 postcode area, our engineers can take on air source heat pumps. Our list for Greater London has 764 entries and Hyde farm estate is among them.
Not far from Hyde farm estate, a recent job of ours was on Streatham High Road, Streatham (SW16), about 1 mile south: installing two LG wall-mounted units in the main nail bar area and a third unit in the treatment room.
You’ll find streets such as Weir Road, Byrne Road and Atkins Road, each of them within reach. If your postcode is in SW12, SW2 and SW4, you’re inside the area we cover. Other places close to Hyde farm estate include Grange Mills (1 mile north-west), Balham (1 mile west), Clapham Park (1 mile north), Streatham Hill (1 mile east) and Streatham Park (1 mile south). Within a short drive, we also cover London (4 miles north-east), City of Westminster (5 miles north), Marylebone (5 miles north) and Kensington (5 miles north-west).
What’s near Hyde farm estate
Around Hyde farm estate, our work takes us to homes and businesses near Waldorf School of South West London, Wandsworth Common and La Retraite Roman Catholic Girls' School and the streets around them. The closest station to Hyde farm estate is Balham station, roughly 0.5 miles west. Other landmarks nearby include St James' Hospital (1 mile west) and Southside Wandsworth (2.5 miles west). Green spaces nearby include Knight's Hill and Oakleigh Way.
Questions from Hyde farm estate
Is planning permission needed for a heat pump in Hyde farm estate?
It comes down to the building and the spot chosen for the outdoor unit. There’s a conservation area, the Hyde Farm Conservation Area, close to central Hyde farm estate. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with Lambeth council, which is normally the planning authority for Hyde farm estate.
Is the heat pump grant available in Hyde farm estate?
Yes, the scheme covers homes in England, including Hyde farm estate, if they qualify. Whether your home qualifies, and for how much, depends on the type of heat pump and the heating it replaces. You don’t apply yourself: the MCS certified installer does, which is us.
Do you work for landlords and businesses?
Yes. Homeowners, landlords, agents and businesses all book us across London and the South East. Let us know who the records should go to.
Are my radiators big enough for a heat pump?
Some radiators may be fine as they are, and some may need to be larger. Heat pumps run at lower flow temperatures, so radiators give out less heat, and the survey checks each one.
Do you work on all makes?
We install and work on the leading makes, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. Tell us the make and model and we’ll take it from there.
Can I fit air conditioning or a heat pump myself?
Anything that involves the refrigerant needs an F-Gas qualified engineer from a certified company. That’s the law, not just our preference, and manufacturers expect it for their warranty too. We’re happy to quote for the full job, supply to commissioning.
Will you make a mess?
Protection goes down first: dust sheets over floors and anything close to the work. Any drilling is agreed with you first, and we clear up the dust and offcuts when we finish.
A customer’s words
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager