Kent · Heat pump installation

Heat pump installers in Holborough

Air source heat pumps for Holborough and the surrounding area: diagnosis first, then a fixed-price quote, the work and written records. Call for a fixed-price quote.

  • A boiler that’s getting old
  • Deciding which kind of heat pump suits the home
  • Replacing a combi boiler with a heat pump

Air source heat pumps for Holborough

Air source heat pumps in Holborough

As an MCS certified installer, we fit air source heat pumps for homes in Holborough and the rest of Kent. There are two kinds: air-to-water, which heats radiators or underfloor heating and your hot water, and air-to-air, which warms rooms through indoor units and can also cool. We’ll explain which type fits your home and why. Typical jobs include a boiler that’s getting old and planning and permitted development questions, on radiator systems, hot water cylinders and air-to-air heat pumps.

Whether a home near Holborough has mains gas makes a difference to the grant. Homes heated by oil or LPG with no mains gas can get an extra £1,500 on the Boiler Upgrade Scheme until March 2027.

Looking after a system is mostly common sense: clear space around the outdoor unit, the cleaning the manual describes and a service at the recommended interval. That also helps where the warranty terms ask for regular servicing.

Where
Holborough (ME6, ME1, ME19)
Region
Kent
Enquiries
We reply the same working day
Typical price
£8,000–£16,000 (0% VAT on homes), before the grant
Quote
Fixed, in writing
Accreditations
F-Gas certified, NICEIC approved, MCS
Call
07833 053749
Updated
30 October 2026

Homes in Holborough and heat pumps

About 36% of households live in terraced houses, according to Census 2021 figures. In a terrace, the outdoor unit position and the MCS noise check need particular care.

Older homes near Church of the New Jerusalem may need extra checks for planning and heat loss before a heat pump is designed. If you live near Snodland station, the survey compares air-to-water and air-to-air for your home before anything is quoted.

Holborough is about 4 miles west of Chatham, in Kent. Whether you are in the middle of Holborough or further out, our engineers cover air source heat pumps, from small jobs to large ones. Our Kent coverage runs to 922 places, and Holborough is one of them. The nearest of our city pages is Bromley, around 19 miles from Holborough.

That includes properties on Lee Road, Byrne Road and Ladds Lane and the roads around them. We work across ME6, ME1 and ME19 and the roads nearby. Places around Holborough that are also on our list: Snodland (1 mile south-west), Peters Village (1 mile east), Scarborough (1 mile east), Upper Halling (1 mile north-west) and Wouldham (1 mile north-east). Within a short drive, we also cover Maidstone (6 miles south-east), Sittingbourne (13 miles east), Dartford (12 miles north-west) and Sevenoaks (12 miles west).

Around Holborough

Around Holborough, our work takes us to homes and businesses near The Monks Head pub, Holborough Marshes and The Holmesdale School, among other places. For rail, the closest station is Snodland station, roughly 0.5 miles south. Nearby you’ll also find St. Catherine's Hospital (4.2 miles north-east) and Leybourne Castle (2.5 miles south-west). For a walk, there’s Blue Bell Hill and Burham Down.

Map of Holborough © OpenStreetMap contributors

Aftercare tips

Here’s the after-treatment advice, short and simple:

  • Let the heat pump run steadily, as set up at handover
  • Clear leaves and debris from the outdoor unit
  • Find out the grant position at the survey

Now and then in cold weather, the outdoor unit defrosts itself. It may give off steam or sound different for a few minutes and it’s part of how the system works.

Book a service every year. Your manufacturer’s warranty terms may say something about servicing.

What we do, step by step

Protection comes first: dust sheets over floors and furniture near the work and nothing is moved without asking you. After that, anything electrical is made safe and we start. The work on site takes several days for an air-to-water system with a new cylinder, less for an air-to-air system, and we clear up before we go. Everything the job in Holborough needs is worked out beforehand.

  1. First, a chat about the property and your goals for the heating.
  2. The survey checks heat loss, emitters, hot water and the outdoor unit position.
  3. We recommend air-to-water or air-to-air and check the grant position.
  4. We install the heat pump and connect it up.
  5. After commissioning, you get the MCS certificate and a handover.

Before we arrive

  • Find the manual or the paperwork for the system, if you have it
  • Make sure we can reach the outdoor unit, or where it will go
  • Clear a path to the units and the space around them

Getting a price

To help us quote: the address and the type of property, pictures of the rooms or units, the make and model of any existing system and any symptoms, from error codes to drips. Once you have those, call us on 07833 053749.

Ask for a quote

Advice

Holborough: your questions answered

Do I need planning permission for a heat pump in Holborough?

That depends on the building and where the outdoor unit goes. The Holborough Mill, Snodland Conservation Area is close to the centre of Holborough. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit cannot face a road. Where needed, we check with the local planning authority (for Holborough, normally Tonbridge and Malling council).

Do you cover smaller places like Holborough?

Yes, smaller places are covered as well as towns. We are based in East Grinstead and plan each visit so the job can be finished in one trip where possible.

Do you survey before quoting?

Yes. Photos often do the job for simple work, while larger systems and faults that need testing are seen on site.

Does servicing affect my warranty?

Each manufacturer decides. Where servicing is a condition, a missed service could give the manufacturer grounds to refuse a claim, so we explain the terms on your quote.

How long will it take to install a heat pump?

A typical installation takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. The programme is planned to keep time without heating short and agreed before any work starts.

Can landlords and managing agents book you?

Yes. From one rented home to commercial buildings, we work the same way: survey or diagnosis, a fixed price and proper paperwork.

Do you offer maintenance contracts?

Yes. Send details of the systems and how they’re used and we will propose a schedule and quote for it. Leak checks required by the F-gas rules can be built in for larger systems.

What affects the quote in Holborough

Typical ranges are on our prices page, but every job is priced on its own. What we look at:

  • What electrical work the job needs
  • How many units are involved
  • Access, including height, roofs and ladders

Putting the work off seldom saves money. Faults and wear in a system tend to grow, and a system working harder than it should costs more to run. If you’re not sure what’s needed, call 07833 053749, or email if that’s easier and we’ll give you an honest view and a fixed price.

What we need to know

Before you ask for a quote, gather:

  • The rating plate or label on any existing unit
  • The address and the type of property
  • The paperwork from the last service, if you have it

Want a quote for air source heat pumps? Please call us on 07833 053749 or drop us a line and tell us about the job. We’ll talk you through the options and give you a fixed-price quote before you commit to anything.

Why act early in Holborough

Planning rules have specific conditions. Checking the position for your home at the survey stage avoids surprises later covering listed buildings, conservation areas and any Article 4 direction. For a place like Holborough, booking ahead lets us plan the visit properly.

What you pay reflects the actual work. That is why we look at the job first, from photos or on a survey, and why the quote is fixed before we start.

Why book with us

  • Listed on Checkatrade
  • A fixed price before any work starts
  • A 24/7 emergency line
  • F-Gas company certification

See how installs are priced and how to check a contractor.

A customer’s words

“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”

David W., Haywards Heath

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead