Essex · Heat pump installation

Air Source Heat Pumps in Foster Street

Air source heat pumps in Foster Street from an F-Gas certified company, with warranty terms explained brand by brand. We reply to enquiries the same working day.

  • Choosing between air-to-water and air-to-air
  • Questions about where the outdoor unit can go
  • Radiators that may be too small for a heat pump

Air source heat pumps for Foster Street

About our air source heat pumps in Foster Street

An air-to-water heat pump heats water to a lower temperature than a typical boiler, so radiators may need to be larger to give out the same heat. The survey shows which rooms are fine and which need changes, and the quote sets it out. The work covers radiator systems, air-to-air heat pumps and air-to-water heat pumps, and the jobs we see most are no space for a hot water cylinder and checking emitters for a heat pump.

If your home in or near Foster Street is heated by oil, LPG or electric heaters with no mains gas, the Boiler Upgrade Scheme adds an extra £1,500 until March 2027 for an air source or ground source heat pump, on top of the £7,500.

Think of the paperwork as the system’s health record: what was fitted or found, what was done and when. It makes the next visit quicker and any warranty question simpler, so keep it safe.

Place
Foster Street (CM17)
Region
Essex
Approvals
F-Gas certified, NICEIC approved, MCS
Typical price
£8,000–£16,000 (0% VAT on homes), before the grant
Response
We reply the same working day
Pricing
Fixed-price quote after a site survey
Telephone
07833 053749
Checked
30 October 2026

Common questions in Foster Street

Is a heat pump in Foster Street permitted development?

That depends on the building and where the outdoor unit goes. Historic England lists about 5 buildings and structures within half a mile of the centre of Foster Street. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with the local planning authority (for Foster Street, typically Epping Forest council).

Can I get the Boiler Upgrade Scheme grant in Foster Street?

Yes, the scheme covers homes in England, including Foster Street, if they qualify. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. We hold MCS certification, so the application is ours to make for you.

Do you work on all makes?

The main ones, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. For a new system, we suggest the make and model that suit the property and explain why.

Can you set up regular servicing?

Yes. Maintenance contracts are part of what we do, set at the interval the system and the manufacturer’s terms need. Each visit is written up, with F-Gas records where refrigerant work is involved.

Can I fit air conditioning or a heat pump myself?

No, not the refrigerant side. The F-gas rules require certified companies and qualified engineers for it, and a new circuit is notifiable under Part P unless a registered electrician, such as a NICEIC approved contractor, does it.

What does an air-to-water heat pump cost?

An air-to-water heat pump costs £8,000–£16,000 (0% VAT on homes) before the grant. Eligible homes in England and Wales can get £7,500 through the Boiler Upgrade Scheme, and we confirm eligibility before you commit.

How much time does a heat pump install need?

The work takes a few days for most air-to-water installations, with air-to-air systems often quicker. The survey lets us set a firm programme, so give us a ring on 07833 053749 or use the quote form to arrange one.

Looking after it afterwards

Every system needs looking after, and most of it is easy. Our tips:

  • Keep the MCS certificate with the manufacturer’s paperwork
  • Know the servicing conditions in your warranty
  • Keep to regular servicing

In cold, damp weather the outdoor unit runs a defrost cycle from time to time. It may give off steam or sound different for a few minutes and it’s part of how the system works.

Keep radiators and indoor units unobstructed so the heat can get into the room.

Fixed-price quotes for air source heat pumps in Foster Street

We quote each job individually. These are the things that affect it:

  • How far the pipework has to run, and where
  • Access, including height, roofs and ladders
  • The electrical supply and whether a new circuit is needed

Several rooms, units or sites on one quote often makes better use of the time. Tell us about everything you’d like looked at and we’ll price it together.

What to send for a quote

Simple jobs can often be priced from photos and some basics. Useful things to send:

  • A few pictures of the room and the wall the unit is on, or will go on
  • The outside wall, roof or yard where the outdoor unit sits or would go
  • Any error code or flashing light on the display

Need a price for air source heat pumps? Please give us a ring on 07833 053749 or write to us at info@aircondoctor.co.uk and tell us about the job. We’ll talk you through the options and give you a fixed-price quote before anything is booked.

What we do, step by step

Everything the job needs comes with us, from tools and test equipment to ladders and dust sheets. You only need to give us clear access to the units, or their planned positions, and to the fuse board. On site, the work takes from a couple of days to around a week, depending on the system and how much of the heating changes. Seeing the property in photos first means the trip to Foster Street can be planned properly.

  1. First we find out about the property, the heating you have now and what you’re hoping for.
  2. We survey the home room by room for heat loss, and check the emitters, hot water and outdoor unit position.
  3. The price comes back fixed and in writing, with the grant and VAT shown line by line.
  4. Fitting day: the outdoor unit is placed, the indoor side connected and the controls set up.
  5. Commissioning, MCS certification and a handover of the controls finish the job.

Before we arrive

  • Unlock any gate, garage or side passage we need
  • Mention any managing agent or landlord rules we need to follow
  • Name a contact who can meet us at the agreed time

Getting a quote

Photos are the fastest route to a quote: the inside and outside of the property where the work is, plus the rating plate of any unit already there. Add the address and what you’d like done, and simple jobs can often be priced without a visit.

Get a quick quote

Related advice

How the job changes from property to property

Outdoor unit position and planning

Flats and blocks of flats have different limits, and Article 4 directions can remove rights. Listed buildings also need separate consent, and we check the position for your property.

Radiators and underfloor heating

Any radiator changes are set out in the quote, so the work is clear.

Air source heat pumps around Foster Street

About 21 miles out from central London, Foster Street is part of the South East area we work across.

Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler. Live in one of the older houses around Church of All Saints? Expect the survey to look closely at heat loss and at the building’s planning status.

Foster Street is about 2 miles east of Harlow, in Essex. Foster Street gets the same approach as every job we take on: diagnosis first, a fixed price and proper paperwork when we have finished. Count every place we list in Essex and you reach 644, with Foster Street on the list. Our London page covers places nearby (21 miles or so).

Foster Street, Highfield Close and Hastingwood Park and the roads off them are all inside our area. All of CM17 is covered. Close to Foster Street, our area also takes in Hastingwood (1 mile south), Newhall (1 mile north-west), Latton (1 mile west), Magdalen Laver (1 mile east) and Housham Tye (2 miles north-east). Within a short drive, we also cover Chelmsford (14 miles east), Brentwood (11 miles south-east), Billericay (15 miles south-east) and Loughton (9 miles south-west).

What’s near Foster Street

Typical jobs here are in properties near John Barleycorn Public House, Passmores Academy and Brays Grove, among other places. The closest station to Foster Street is Harlow Mill station, about 2.3 miles north-west of the centre. Well-known places in the area include Princess Alexandra Hospital (3 miles west) and Harlow Mill (2.4 miles north-west). The countryside around Foster Street includes Gernon Bushes.

Map of Foster Street © OpenStreetMap contributors

From one of our customers

“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”

James T., Crawley, office manager

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead