Kent · Heat pump installation

Air Source Heat Pumps in Eridge Green

Air source heat pumps, in Eridge Green and nearby. Call for a fixed-price quote, and we will reply the same working day.

  • Plans to switch to electric heating with a heat pump
  • An oil, LPG or gas boiler near the end of its life
  • Working out whether radiators need upsizing

Air source heat pumps across Eridge Green

Air source heat pumps for homes and businesses in Eridge Green

Installing an air source heat pump in a home is zero-rated for VAT until 31 March 2027, then 5%. That follows HMRC Notice 708/6, and it does not apply to businesses. For air-to-air systems, we confirm the VAT on your quote. Please treat this as general information rather than tax advice. We are often asked to deal with choosing between air-to-water and air-to-air and questions about the Boiler Upgrade Scheme, on air-to-air heat pumps, underfloor heating and hot water cylinders.

Space for an outdoor unit is rarely an issue near Eridge Green, so the design focuses on heat loss and radiators.

If a fault appears while the equipment is under the manufacturer’s warranty, tell us the make, model and installation date. We will explain how the manufacturer’s terms are likely to apply before anything chargeable is done.

Location
Eridge Green (TN3)
Wider area
Kent
Credentials
F-Gas certified, NICEIC approved, MCS
Guide price
£8,000–£16,000 (0% VAT on homes), before the grant
Response
On the working day you ask
Quote
A fixed-price quote up front
Telephone
07833 053749
Page updated
30 October 2026

Common questions in Eridge Green

Is Eridge Green within the area you cover?

We do. Villages and hamlets get the same service as the bigger towns. Send a few details and photos, and we reply the same working day.

Will a heat pump in Eridge Green need planning permission?

There’s no single answer: the building and the outdoor unit position decide it. The Eridge Green and The Forstal Conservation Area takes in the middle of Eridge Green. The permitted development rules for heat pumps leave out listed buildings and stop outdoor units going on road-facing walls or roofs in conservation areas. Anything outside the rules needs an application, and we raise it with the local planning authority (for Eridge Green, usually Wealden council) first.

Do you offer maintenance contracts?

Yes. We offer maintenance contracts, set at the interval the system and the manufacturer’s terms need. Each visit is written up and F-Gas records kept where they apply.

Will you work on another installer’s system?

Yes. Systems fitted by other companies are fine, on all the main brands. Tell us the make and model and send any paperwork you have.

Do I need to service the system to keep the warranty?

Check the manufacturer’s terms. Some warranty terms require the system to be serviced regularly by a qualified engineer, so it’s worth checking. Either way, keep a record of every service.

Do you provide F-Gas records?

Yes. It’s the record a manufacturer or the next engineer will ask to see: a dated note of the work, with refrigerant details where they apply.

Is the equipment covered by a warranty?

It’s the manufacturer’s, and the terms are theirs. Some brands make regular servicing a condition, so keep your service records.

Heat pumps in Eridge Green: local notes

About 48% of homes in and around Eridge Green were built before 1919, according to the Valuation Office Agency’s council tax figures, and the 2021 Census found about 83% of households in detached or semi-detached houses. Older homes can lose heat faster, so a room-by-room heat loss calculation, and sometimes insulation or larger radiators, comes before sizing a heat pump. Detached and semi-detached houses normally have room for the outdoor unit and a cylinder.

If your home is one of the older properties near Holy Trinity Church, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen. If your home is listed, like Groombridge Place about 1.9 miles north-west, listed building consent comes before any heat pump work.

Eridge Green is about 3 miles south-west of Royal Tunbridge Wells, in Kent. Across the TN3 area, our engineers can take on air source heat pumps. Our area takes in 922 places across Kent. East Grinstead, roughly 10 miles off, has its own page on this site.

The closest recent job we can point to from Eridge Green was on Beacon Road, Crowborough (TN6), about 4 miles south-west: installing a Mitsubishi Electric multi-split system serving four bedrooms and a large home office.

If you need air source heat pumps at a property on Warren Farm Lane and Forge Road or a nearby road, our engineers can take on the work. If your postcode is in TN3, the property is within reach. Neighbouring places we cover include Frant (2 miles east), The Platt (2 miles south-east), Mark Cross (3 miles south-east), Town Row (3 miles south) and Rotherfield (4 miles south). Larger places within reach include Sevenoaks (13 miles north), Royal Tunbridge Wells (3 miles north-east), Tonbridge (7 miles north) and Kings Hill (14 miles north-east).

Landmarks near Eridge Green

In Eridge Green, that means homes and buildings near Eridge Park. The closest station to Eridge Green is Eridge station, roughly 1.2 miles south-west of the centre. Other landmarks nearby include The Corn Exchange (2.4 miles north-east) and Tunbridge Wells Homeopathic Hospital (2.8 miles north-east). Open spaces near Eridge Green include Broadwater Warren RSPB Reserve.

Map of Eridge Green © OpenStreetMap contributors

How we price air source heat pumps

Every job gets its own quote. This is what makes a difference:

  • Whether we need access equipment for high-level work
  • The electrical supply and whether a new circuit is needed
  • A single visit or a regular plan

No two properties are the same, so each one gets its own fixed-price quote. The equipment, how we reach it, the route between units and the work needed all make a difference.

What we need to know

To help us quote quickly, please include:

  • The fuse board and where it is in the property
  • A short video of any fault, such as a noise or a flashing light
  • Where the outdoor unit is, or where you’d like it

To help us quote: where the property is and what kind of building it is, photos of the rooms or units, the make and model of any existing system and any symptoms, from error codes to drips. Once you have those, ring us on 07833 053749 or fill in the contact form.

Before you call an engineer

On air conditioning, the filters in the indoor unit are usually the one part owners can clean, if the manual says so. They come out, get a gentle clean and go back only when they’re dry. For a heat pump, the main owner jobs are a clear outdoor unit and sensible control settings.

Owners can handle the everyday basics: keep the outdoor unit clear of leaves, plants and clutter, check the settings and the remote, and follow the cleaning the manual describes. Anything inside the units, the electrics and the refrigerant is engineer’s work.

What happens if it’s left?

Radiators that are too small for a heat pump’s lower flow temperature leave rooms cool. The survey picks this up before installation. Small faults tend to grow, so it’s worth dealing with them early.

Homes, offices, shops and public buildings are all priced the same way: what’s needed, how we reach it, the parts and the labour. Call for a fixed-price quote and we will go through it with you.

What you get with us

  • F-Gas certified company
  • A site survey and a fixed-price quote
  • We diagnose before we treat
  • MCS certification for heat pump work

Take a look at our cost guide and our accreditations and certificates.

What happens on the day

Each visit runs to the same pattern: agree the plan on site, protect the area, do the work, test what we have done and explain it all to you. On site, the work takes from a couple of days to around a week, depending on the system and how much of the heating changes. A few photos help us make the most of a visit to Eridge Green.

  1. First, a chat about the property and your goals for the heating.
  2. We survey for heat loss and look at radiators, cylinder space and outdoor unit options.
  3. We recommend air-to-water or air-to-air and check the grant position.
  4. Installation follows on the agreed dates.
  5. We commission it, complete the MCS certificate and show you how to use it.

Preparing for the visit

  • Clear a path to the units and the space around them
  • Mention any parking restrictions near the property
  • Have the make and model of any existing unit to hand

Ask for a quote

Want a quote for air source heat pumps? Please phone 07833 053749 or send an email with a few details about the property. We will explain what we’d recommend and why, then send a fixed-price quote before you commit to anything.

Ask for a quote

Read more

From one of our customers

“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”

Sarah M., East Grinstead

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead