Buckinghamshire · Heat pump installation
Air Source Heat Pumps in Cores End
Air source heat pumps in Cores End from an F-Gas certified company, with warranty terms explained brand by brand. We reply to enquiries the same working day.
- Ageing boilers that will need replacing
- Checking eligibility for a heat pump grant
- Planning and permitted development questions
Air source heat pumps for homes and businesses in Cores End
In England, an air source heat pump on a house can often go in under permitted development rights. The conditions include an outdoor unit of no more than 1.5 m³ and compliance with MCS 020(a), and the unit can’t be used solely for cooling or sit within the curtilage of a listed building. We check the rules for your property as part of the survey. The work covers air-to-air heat pumps, air-to-water heat pumps and homes heated by oil, LPG or gas, and common reasons people get in touch are questions about the Boiler Upgrade Scheme and wanting to stop using oil, LPG or gas for heating.
Older and listed homes in villages like Cores End need extra care, and permitted development doesn’t cover listed buildings, so we check consent first.
We’re an F-Gas certified company, NICEIC approved for electrical work, with MCS certification for heat pumps and Checkatrade membership. Our engineers hold the F-gas qualifications needed to work on refrigerant.
- Place
- Cores End (SL8, HP10)
- Wider area
- Buckinghamshire
- Response
- Answered the same working day
- Quote
- Fixed after a survey or photos
- Accreditations
- NICEIC approved, F-Gas certified, MCS
- Typical price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Phone
- 07833 053749
- Updated
- 30 October 2026
When something else is needed
A few issues sit outside what this work can do:
- Gas boiler work, such as disconnecting the old boiler, which needs a Gas Safe registered engineer
- Planning approval where permitted development does not apply
- Grants for hybrid systems or replacements of low-carbon systems
Not sure which it is? You can give us a ring on 07833 053749, or email if that’s easier and we’ll tell you honestly.
Parts of the system we cover
- Air-to-water heat pumps
- Homes heated by oil, LPG or gas
- Air-to-air heat pumps
- Underfloor heating
- Hot water cylinders
- Radiator systems
Heat pumps in Cores End: local notes
About 42% of homes in and around Cores End date from 1945 to 1972, according to Valuation Office Agency council tax records, and the last census (2021) found about 62% of households in detached or semi-detached houses. Homes of that age often have cavity walls that may or may not be insulated, which the survey checks. Houses normally have space for an outdoor unit and a hot water cylinder.
If your home is one of the older properties near Cores End United Reformed Church, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen. Cliveden, roughly 1.5 miles south, is a reminder to check your home’s listing status: permitted development does not cover listed buildings.
Cores End is about 3 miles south-west of Beaconsfield, in Buckinghamshire. Anywhere in SL8, we can help with air source heat pumps. Cores End is one of 263 towns, villages and districts in Buckinghamshire we cover. For properties nearby, see our Guildford page, about 24 miles away.
The closest recent job we can point to from Cores End was on Church Street, Staines-upon-Thames (TW18), about 13 miles south-east: installing two LG wall-mounted units in the main office area and a single unit in the client meeting room.
Cores End Road, Frank Lunnon Close and Elms Drive and the roads off them are all inside our area. If your postcode is in SL8 and HP10, the property is within reach. Close by, we work in Bourne End (1 mile west), Well End (1 mile north-west), Coldmoorholme (1 mile west), Fern (1 mile north-west) and Flackwell Heath (1 mile north). Further out, we also cover High Wycombe (4 miles north-west), Chesham (10 miles north), Marlow (3 miles west) and Amersham (8 miles north-east).
Around Cores End
Around Cores End, our work takes us to homes and businesses near The Heart In Hand pub and Wye Valley School, among other places. Cores End has its own railway station: Bourne End station. Other landmarks nearby include Chiltern Sound Phonograph Museum (3.3 miles west) and High Wycombe Castle (4.2 miles north-west). Not far away are Taplow Lake and Warren Nature Reserve.
Common questions in Cores End
Is Cores End within the area you cover?
Yes, and the size of the place makes no difference to how we work. Visits to smaller places are planned so the engineer arrives with what the job needs.
Is planning permission needed for a heat pump in Cores End?
It comes down to the building and the spot chosen for the outdoor unit. Around 12 listed entries sit within 0.5 miles of central Cores End. The permitted development rules for heat pumps leave out listed buildings and stop outdoor units going on road-facing walls or roofs in conservation areas. Anything outside the rules needs an application, and we raise it with Buckinghamshire council, which is typically the planning authority for Cores End first.
Do I need to service the system to keep the warranty?
Each manufacturer decides. Where servicing is a condition, a missed service could give the manufacturer grounds to refuse a claim and we will tell you what your brand asks for.
Do I get paperwork after the visit?
Yes. It’s the record a manufacturer or the next engineer will ask to see: a dated note of the work, with refrigerant details where they apply.
What’s the difference between air-to-water and air-to-air heat pumps?
It depends on your home, your heating and whether you want cooling. The grant is £7,500 for eligible air-to-water systems and £2,500 for air-to-air in limited cases. We explain the options after the survey.
What VAT do I pay on a heat pump?
For homes, currently none: until 31 March 2027 the rate is 0% in residential accommodation, then 5%. The relief isn’t available to businesses, and for air-to-air systems we confirm the VAT on your quote. This is general information, not tax advice.
Which brands do you work with?
Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries, Hitachi and others. For new systems, we recommend a brand and model to suit the job and explain why.
How it works
The visit goes in the diary at a time that works for you, and we let you know if plans need to move. When we arrive, we check the job against the survey or the photos you sent. If something is different, we talk it through with you before carrying on. From there, the work takes a few days for most air-to-water installations, with air-to-air systems often quicker. If a lane or gateway near Cores End is tight for a van, let us know and we will plan for it.
- First we talk through the property and the current system.
- Every room’s heat loss is worked out on site.
- We design the system, check the radiators and cylinder and look at the outdoor unit position.
- Cost, grant and VAT appear on one fixed-price quote.
- Then it’s fitted, commissioned and registered with MCS.
Before we arrive
- Tell us about access, such as roof hatches, high walls or locked plant areas
- Find the manual or the paperwork for the system, if you have it
- Tell us about any building rules, permits or sign-in
Getting a quote
For air source heat pumps in Cores End, give us a ring on 07833 053749 or drop us a line. Tell us what kind of property it is and what you’d like done, and send a few photos if you can. Enquiries get a reply the same working day.
Advice
Places near Cores End
Other services in Cores End
What affects the cost of air source heat pumps
A fixed price needs a few facts first. We look at:
- The equipment or parts the job needs
- Access, including height, roofs and ladders
- What electrical work the job needs
What you pay reflects the actual work. That is why every job is looked at first, and the price is agreed before we start.
What we need to know
When you contact us, these details help:
- A close-up of the unit’s label showing the model number
- A few pictures of the room and the wall the unit is on, or will go on
- The address and the type of property
Our prices page gives typical ranges, but your quote is based on your job, because every property is different. Once we have looked at the job, from pictures or on a survey, you get a fixed price. To start, give us a ring on 07833 053749 or fill in the contact form.
How the job changes from property to property
Heat loss surveys
A heat loss survey measures how much heat each room loses on a cold day. It’s the basis for sizing the heat pump and the radiators.
Hot water cylinders
An air-to-water heat pump heats hot water through a cylinder. Space for the cylinder is part of the survey particularly in homes with a combi boiler.
From one of our customers
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath