Greater London · Heat pump installation
Heat pump installation in College Park, Greater London
Air source heat pumps in and around College Park, from the first look to the final check and a fixed price agreed before we start.
- Planning and permitted development questions
- Plans to switch to electric heating with a heat pump
- A boiler that’s getting old
Air source heat pumps in College Park, done properly
Every installation starts with a heat loss survey. That tells us how much heat the home needs, room by room, so the heat pump and the radiators or indoor units can be sized properly. Sizing by rule of thumb is not good enough. Common call-outs are for working out where a cylinder could go and ageing boilers that will need replacing, on homes heated by oil, LPG or gas, hot water cylinders and radiator systems.
For flats in College Park, the lease, the freeholder and the rules for flats all come into it. Permitted development limits are different for flats, so we check the position before we design.
Warranty periods vary by brand and by product. Daikin, for example, gives a standard 2 years on split air conditioning, with longer extensions only on its air-to-water heat pumps. Whatever the brand, the manufacturer’s terms are explained on your quote.
- Location
- College Park (NW10, W10, NW26)
- Wider area
- Greater London
- Quote
- Fixed, in writing
- Costs
- £8,000–£16,000 before the grant, 0% VAT on homes
- Replies
- We reply the same working day
- Credentials
- NICEIC and F-Gas, MCS
- Telephone
- 07833 053749
- Updated
- 30 October 2026
Safe owner checks
Good habits make our visits easier, not unnecessary. Clean filters and a clear outdoor unit help the system run as it should, but the inside of the units, the refrigerant and the electrics still need a qualified engineer.
Leave the units and pipework where they are. Disconnecting a system means dealing with refrigerant, which only a qualified engineer can do, and the electrics need care too. If you need something moved, we can quote for it.
Why act early in College Park
From 1 April 2027, VAT on heat pumps in homes rises from 0% to 5%. It’s a date to bear in mind when planning alongside your own plans for the property. Approvals for flats in College Park can take longer than the install itself.
No two properties are the same, so we price each one individually. The system, the access, the pipe routes and the parts involved all play a part.
Why choose AirCon Doctor in College Park
- 24/7 emergency line for breakdowns
- Diagnosis first, then a fixed price
- A site survey and a fixed-price quote
- MCS certified heat pump installers
Read how installs are priced and our accreditations and certificates.
Rented and managed buildings
Keeping records across a portfolio is half the battle. Each visit produces a dated record, with F-Gas records wherever refrigerant work is involved, ready for a tenant, a buyer or an inspection.
Larger air conditioning systems in buildings need more than servicing: systems with an effective rated output over 12 kW need a TM44 inspection by an accredited energy assessor at least every 5 years. We can arrange it, prepare the system for it and fix what it finds.
Towns and villages near College Park
Other services in College Park
Your questions about air source heat pumps in College Park
Do I need planning permission for a heat pump in College Park?
It depends on the property. A conservation area takes in the middle of College Park. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with Brent council, which is typically the planning authority for College Park.
Is the heat pump grant available in College Park?
Yes, if the home and the heat pump meet the scheme’s rules: College Park is in England, where it applies. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. As an MCS certified installer, we apply for it on your behalf.
Will I get records for the system?
Yes. It’s the record a manufacturer or the next engineer will ask to see: the date, the work, and any refrigerant added or recovered.
Who has to arrange F-Gas leak checks?
The F-gas rules share it between the equipment’s operator and the engineers who work on it. How often depends on the size of the refrigerant charge in tonnes of CO2 equivalent: at least yearly for 5 to under 50 tCO2e, and every 6 months for 50 to under 500 tCO2e.
Do you protect the property while you work?
Protection goes down first: dust sheets over floors and anything close to the work. Any drilling is agreed with you first, and we clear up the dust and offcuts when we finish.
Which brands do you work with?
We work with the leading brands, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. Send us the make and model if you have it.
Do you work on commercial properties?
Yes. Homeowners, landlords, agents and businesses all book us across London and the South East. Tell us who should receive the paperwork.
Heat pumps in College Park: local notes
About 79% of homes in the College Park area were built before 1919, according to VOA council tax data, and about 68% of households live in flats, according to the last census (2021). Period properties can still suit a heat pump, but the design has to start from accurate heat loss figures. A flat may have no room for a hot water cylinder, and the freeholder normally has a say on the outdoor unit, which can tip the choice towards air-to-air. In London, outside space and the rules for flats often decide which kind of heat pump suits.
Live in one of the older houses around Saint Mark's? Expect the survey to look closely at heat loss and at the building’s planning status. Historic houses such as Leighton House, about 2.6 miles south-east, are a reminder that listed homes need consent before a heat pump goes in.
College Park is about 1 mile south-east of Harlesden, in Greater London. Wherever you are in the NW10 postcode area, we can help with air source heat pumps. Our list for Greater London has 764 entries, and College Park is one. London is in our area too, about 6 miles from College Park.
The closest recent job we can point to from College Park was on East Hill, Wandsworth (SW18), about 6 miles south: installing a Daikin wall-mounted unit in the open-plan living area.
Every address in NW10, W10 and NW26 is covered. Our engineers work on Tubbs Road, Waldo Road and Hythe Road and nearby roads. Places around College Park that are also on our list: Kensal Green (1 mile east), Old Oak Common (1 mile south-west), Harlesden (1 mile north-west), Willesden Green (1 mile north) and Kensal Rise (1 mile east). Further out, we also cover London (6 miles east), City of Westminster (4 miles east), Marylebone (4 miles east) and Kensington (3 miles south-east).
Around College Park
Locally, jobs take us to houses, flats and workplaces close to Newman Catholic College, Brondesbury College and Little Wormwood Scrubs and the streets around them. There’s a railway station in College Park itself: Willesden Junction station. Well-known places in the area include Westfield London (1.7 miles south) and Brent Museum and Archives (1.1 miles north). Not far away are Westbere Copse and The Long Water.
How the visit works
Everything the job needs comes with us, from tools and test equipment to ladders and dust sheets. All we ask is clear access to the units, or to where they’ll go, and to the consumer unit. The visit takes a few days on site, depending on the cylinder, the radiators and the pipework involved. Send us a few phone pictures and we can often price a straightforward job in College Park before visiting.
- You tell us about the home and what you want from a heat pump.
- The survey checks heat loss, emitters, hot water and the outdoor unit position.
- We recommend air-to-water or air-to-air and check the grant position.
- Installation follows on the agreed dates.
- We commission it, complete the MCS certificate and show you how to use it.
Getting ready for the visit
- Mention any managing agent or landlord rules we need to follow
- Unlock any gate, garage or side passage we need
- Clear the space around the indoor unit, or where it will go
How to get a quote
Every quote starts with a look at the job, from a site survey or, where the job is straightforward, from pictures and measurements. After that, we send a fixed price so you know the cost before we begin.
Advice
What a customer said
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead