West Berkshire · Heat pump installation
Heat pump installation in Brimpton Common, West Berkshire
One call covers heat pump installation in Brimpton Common: diagnosis, fixed price, work and sign-off. An F-Gas certified company, NICEIC approved, on Checkatrade.
- An oil, LPG or gas boiler near the end of its life
- Working out where a cylinder could go
- Checking whether planning permission is needed
What a heat pump looks like in Brimpton Common
VOA council tax data date about 47% of homes in and around Brimpton Common to the post-war years, 1945 to 1972, and about 67% of households live in detached or semi-detached houses, according to the last census (2021). For homes of that age, the survey checks the insulation, the radiators and the hot water setup. Houses typically have space for an outdoor unit and a hot water cylinder.
Every heat pump design starts with a room-by-room heat loss calculation. Period properties close to Church of St Nicholas can suit a heat pump, though insulation and any heritage protection are checked first.
Brimpton Common is about 2 miles west of Tadley, in West Berkshire. Wherever you are in the RG7 postcode area, we can help with air source heat pumps. Our list for West Berkshire has 155 entries, and Brimpton Common is one. Guildford, roughly 28 miles off, has its own page on this site.
Our working area takes in RG7, every street of it. Neighbouring places we cover include Heath End (1 mile south-east), Inhurst (1 mile south-east), Baughurst (1 mile south-east), Axmansford (1 mile south) and Brimpton (1 mile north-west). We also work in nearby towns such as Newbury (6 miles west), Thatcham (4 miles north-west), Burghfield Common (6 miles north-east) and Speenhamland (7 miles north-west).
Landmarks near Brimpton Common
Around Brimpton Common, our work takes us to homes and businesses near Brimpton C.E. Primary School, among other places. For rail, the closest station is Midgham station, roughly 2.2 miles north of the centre. Nearby you’ll also find Calleva Museum (3.8 miles east) and West Berkshire Community Hospital (5.4 miles north-west). Open spaces near Brimpton Common include Thatcham Reed Beds.
Air source heat pumps in Brimpton Common, done properly
We install air source heat pumps in Brimpton Common and across West Berkshire, and we are MCS certified. Air-to-water systems feed your radiators or underfloor heating and hot water cylinder, while air-to-air systems heat rooms directly through indoor units and can cool them too. We’ll explain which type fits your home and why. If you’re dealing with working out whether radiators need upsizing and ageing boilers that will need replacing, we can sort it out.
If your home in or near Brimpton Common is heated by oil, LPG or electric heaters with no mains gas, an extra £1,500 is available through the Boiler Upgrade Scheme until March 2027.
Aftercare is simple, and most of it is in the manual: clear space around the outdoor unit, the cleaning the manual describes and a service at the recommended interval. That also helps where the warranty terms ask for regular servicing.
- Location
- Brimpton Common (RG7)
- Wider area
- West Berkshire
- Prices
- £8,000–£16,000 before the grant, 0% VAT on homes
- Credentials
- NICEIC approved, F-Gas certified, MCS
- Quotes
- Fixed after a survey or pictures
- Telephone
- 07833 053749
- Reviewed
- 30 October 2026
What happens on the day
The visit has three parts, a bit like a doctor’s appointment: diagnose, treat and sign off. First comes a careful look at the system or the space, then the work itself, and finally we test, record and explain. Most of the time goes on the middle part, which takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. A few photos help us make the most of a visit to Brimpton Common.
- It starts with a conversation about the home, the existing heating and your plans.
- The survey measures heat loss room by room and looks at radiators, hot water and the best spot for the outdoor unit.
- You get a fixed-price quote, with any grant you’re eligible for and the VAT explained.
- The outdoor unit, the indoor equipment and the controls are installed and connected.
- Once it’s running correctly, the MCS certificate is issued and we show you the settings.
Getting ready for the visit
- Tell us about any building rules, permits or sign-in
- Mention any roof access, ladders or high-level work
- Move furniture away from the wall where we’ll be working
Getting a quote
Some jobs can be priced from photos, while others need a survey. Multi-room systems, commercial buildings and anything with a long or hidden pipe route are normally surveyed first. Either way, you get a fixed price before any work is booked.
Advice
Brimpton Common questions
Can I get the Boiler Upgrade Scheme grant in Brimpton Common?
Brimpton Common is in England, where the Boiler Upgrade Scheme runs. The amount depends on the type of heat pump, and the survey confirms which applies. You do not apply yourself: the MCS certified installer does, which is us.
Is planning permission needed for a heat pump in Brimpton Common?
There’s no single answer: the building and the outdoor unit position decide it. The half-mile around the middle of Brimpton Common holds about 3 listed buildings and structures. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit cannot face a road. Where necessary, we check with the local planning authority (for Brimpton Common, usually West Berkshire council).
Will my radiators work with a heat pump?
It depends on each radiator and the room it heats. Heat pumps run at lower flow temperatures, so radiators give out less heat so we check every radiator against the room’s heat loss.
Whose job is it to check the system for leaks?
The operator of the equipment, working with qualified engineers. Larger systems need regular checks: at least every 12 months from 5 tCO2e and every 6 months from 50 tCO2e. We can tell you which band your system falls into.
Do you work in Brimpton Common?
Yes. We work in Brimpton Common and across West Berkshire, within the London and South East area we cover. For a fixed-price quote, phone us on 07833 053749 or use the quote form.
When will I hear back?
We reply to enquiries the same working day. For a breakdown that cannot wait, call our 24/7 emergency line.
Do you work for landlords and businesses?
Yes. Homeowners, landlords, agents and businesses all book us across London and the South East. Let us know who the records should go to.
When something else is needed
We will always give you a straight diagnosis, so here’s what this work can’t put right:
- Improving the building’s insulation
- Gas boiler work, such as disconnecting the old boiler, which needs a Gas Safe registered engineer
- Promising eligibility for the Boiler Upgrade Scheme
If you are not sure, just phone 07833 053749, or email if that’s easier and we’ll give you a straight answer before you book.
Where we work
- Hot water cylinders
- Air-to-air heat pumps
- Homes heated by oil, LPG or gas
- Underfloor heating
- Air-to-water heat pumps
- Radiator systems
More services for Brimpton Common
Before you call an engineer
Some faults have simple causes you can check first: is the system in the right mode, is the set temperature sensible, are the remote’s batteries working and has the breaker tripped. If a breaker trips again after you reset it, leave it off and phone 07833 053749.
Do not move, re-route or disconnect units or pipework yourself. Disconnecting a system means dealing with refrigerant, which only a qualified engineer can do, and the electrical side needs a competent person. If you need something moved, we can quote for it.
Leave it or put it right?
A sudden boiler failure rarely leaves room to plan a heat pump properly. Surveying and designing in advance means the system is sized right and any grant is applied for while the old heating still works. Small faults tend to grow, so it’s worth dealing with them early.
Several rooms, units or sites on one quote often makes better use of the time. Tell us about everything you’d like looked at, and you’ll get one fixed price.
Why book with us
- A site survey and a fixed-price quote
- MCS certified for heat pumps
- Electrical work covered by our NICEIC approval
- Diagnosis first, then a fixed price
Take a look at our cost guide and our accreditations and certificates.
From one of our customers
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead