Essex · Heat pump installation
Air Source Heat Pumps in Breeds
Our engineers work in Breeds on MCS certified installation of air source heat pumps for heating and hot water, with the Boiler Upgrade Scheme grant applied for. A look at the job first, a fixed-price quote and written records at the end.
- Checking whether planning permission is needed
- Choosing between air-to-water and air-to-air
- A boiler that is getting old
Air source heat pumps for homes and businesses in Breeds
A heat pump takes heat from the outside air and moves it into your home with electricity running the compressor and fans. The technology is close to air conditioning, which is why we install both and the Energy Saving Trust notes that air-to-air heat pumps are sometimes referred to as air conditioning. The work covers radiator systems, underfloor heating and air-to-air heat pumps, and common reasons people get in touch are choosing between air-to-water and air-to-air and planning and permitted development questions.
Homes around Breeds usually have room outside for a heat pump, so the design comes down to heat loss, radiators and hot water.
Some manufacturers make regular servicing by a qualified engineer a condition of their warranty. If that applies to your system, booking the service on time keeps the record straight and each visit is recorded.
- Where
- Breeds (CM3)
- Region
- Essex
- Price
- Fixed, in writing
- Response
- Answered the same working day
- Credentials
- F-Gas certified company, NICEIC approved, MCS
- Costs
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Call
- 07833 053749
- Last updated
- 30 October 2026
Fixed-price quotes for air source heat pumps in Breeds
Jobs vary more than people expect. The main factors:
- What we find on the survey or diagnosis
- The type of system, from a single split to a larger system
- Access, including height, roofs and ladders
No two properties are the same, so we price each one individually. The system, the access, the pipe routes and the parts involved all play a part.
Asking for a quote
A few details help us quote accurately. With your enquiry, please include:
- Your installation or service records
- A close-up of the unit’s label showing the model number
- Wide pictures of the room or the existing unit
Quotes do not take long. Send a few details and photos, and we reply the same working day. If we need to see the property first, we book a survey at a time that works for you.
What owners can safely do
Refrigerant is off limits for anyone without the right qualifications. The law requires anyone working on equipment containing F gas to hold the right qualifications, and the company to be certified, and refrigerant lines can cause cold burns. If you suspect a leak, switch the system off and call us.
There are a few things you can safely do yourself: keeping the outdoor unit clear, checking the mode and set temperature, and the routine cleaning in the manual. Opening up the units, the electrics and the refrigerant circuit are a job for us.
FAQs for Breeds
Will you come out to Breeds?
We do. Villages and hamlets get the same service as the bigger towns. Send a few details and photos, and we reply the same working day.
Can I fit a heat pump in Breeds without planning permission?
It comes down to the building and the spot chosen for the outdoor unit. Central Breeds is a short walk from the Great Waltham Conservation Area. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights do not reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask Chelmsford council, which is normally the planning authority for Breeds.
Does servicing affect my warranty?
Check the manufacturer’s terms. Some warranty terms require the system to be serviced regularly by a qualified engineer, so it’s worth checking. Either way, keep a record of every service.
Am I eligible for a heat pump grant?
Not every home qualifies, so we check. There’s one grant per property, you cannot get one to replace a low-carbon system, and hybrids are excluded and other conditions apply.
Do you look at the job first?
Yes. For simple jobs, pictures and a few details can be enough, while larger systems and faults that need testing are seen on site.
Can you look at a system you didn’t fit?
Yes. Systems fitted by other companies are fine, on all the main brands. Tell us the make and model and send any paperwork you have.
How much time does a heat pump install need?
The work takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. We confirm the timing after the survey, and you can ring 07833 053749 or fill in the contact form to book it.
How it works
Wherever the system can be run before we leave, we run it and check it in operation. Then we explain what was done and answer your questions, and anything that needs attention later is pointed out. The visit takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. Visits to Breeds are agreed with you in advance and planned so the job can be finished in one trip where possible.
- You tell us about the home and what you want from a heat pump.
- We survey for heat loss and look at radiators, cylinder space and outdoor unit options.
- We recommend air-to-water or air-to-air and check the grant position.
- The system is installed and connected to the controls.
- The job ends with commissioning, the MCS certificate and a walk through the controls.
Preparing for the visit
- Tell us about any building rules, permits or sign-in
- Let us know if the units are on a roof, a high wall or in a locked area
- Mention any parking restrictions near the property
Getting a price
Want a quote for air source heat pumps? Please ring 07833 053749 or drop us a line with a few details about the property. We will talk you through the options and give you a fixed-price quote before you commit to anything.
Read more
Nearby places to Breeds
Also in Breeds
What a heat pump looks like in Breeds
About 49% of homes in Breeds and the neighbourhoods around it have been built since 2000, according to VOA council tax data, and about 72% of households live in detached or semi-detached houses, according to the 2021 Census. Lower heat loss in recent homes often means a smaller heat pump and fewer radiator changes. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler. Live in one of the older houses around Church of SS Mary and Laurence? Expect the survey to look closely at heat loss and at the building’s planning status.
Breeds is about 4 miles north of Chelmsford, in Essex. If you need air source heat pumps in Breeds, it’s easy to get a fixed-price quote: please call us on 07833 053749 or use the quote form. Our area covers London and the South East, including Breeds. In Essex alone we list 644 places, and Breeds is one. London, roughly 31 miles off, has its own page on this site.
Whether you’re on Cherry Garden Road, South Street and Duffries Close or anywhere close by, we can help. If your postcode is in CM3, the property is within reach. Other places close to Breeds include Great Waltham (1 mile north-east), Minnow End (1 mile east), Little Waltham (1 mile east), Broomfield (1 mile south-east) and Chignall Smealy (2 miles south-west). Within a short drive, we also cover Chelmsford (4 miles south), Basildon (15 miles south), Braintree (8 miles north-east) and Harlow (14 miles west).
Local landmarks in Breeds
Around Breeds, our work takes us to homes and businesses near The Beehive pub. For rail, the closest station is Beaulieu Park station, about 3.6 miles south-east of the centre. Other landmarks nearby include Broomfield Hospital (1.2 miles south-east). Not far away are Little Waltham Meadows.
How the job changes from property to property
Heat loss surveys
The survey works out the heat needed room by room. Everything else is sized from it.
Hot water cylinders
An older cylinder may not suit a heat pump and we tell you if it needs replacing.
A customer’s words
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager