Hampshire · Heat pump installation
Heat pump installers in Blackmoor
One call covers heat pump installation in Blackmoor: diagnosis, fixed price, work and sign-off. An F-Gas certified company, NICEIC approved, on Checkatrade.
- Checking whether planning permission is needed
- Not knowing whether a grant applies
- An oil, LPG or gas boiler near the end of its life
About our air source heat pumps in Blackmoor
For an air-to-water heat pump, the price is £8,000–£16,000 (0% VAT on homes), before the grant. In England and Wales, the Boiler Upgrade Scheme offers a £7,500 grant towards an eligible air-to-water installation and the installer makes the application. Eligibility depends on the property, so we confirm it before anything is agreed. If the problem is plans to switch to electric heating with a heat pump and questions about where the outdoor unit can go, we can sort it out.
For a home around Blackmoor that’s off mains gas and heated by oil or LPG, the Boiler Upgrade Scheme adds an extra £1,500 until March 2027 for an air source or ground source heat pump, on top of the £7,500.
Equipment warranty comes from the manufacturer, on its own terms, and we explain those terms on your quote. Each brand sets its own conditions, so we go through them with you rather than leave you to find the small print.
- Place
- Blackmoor (GU33)
- Region
- Hampshire
- Typical price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Accreditations
- F-Gas certified company, NICEIC approved, MCS
- Price
- A fixed price before we start
- Telephone
- 07833 053749
- Checked
- 30 October 2026
The process
Think of the visit in three stages: diagnose, treat and sign off. First we check the system or the space against the plan, then we do the work, and finally everything is tested, recorded and explained. Most of the time goes on the middle part, which takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. Visits to Blackmoor are agreed with you in advance and planned so the job can be finished in one trip where possible.
- First we find out about the property, the heating you have now and what you’re hoping for.
- We survey the home room by room for heat loss, and check the emitters, hot water and outdoor unit position.
- We send a fixed-price quote that shows the equipment, the grant position and the VAT.
- Installation covers the outdoor unit, the indoor connections and the controls.
- Commissioning, MCS certification and a handover of the controls finish the job.
Getting ready for the visit
- Clear access to the fuse board
- Find the manual or the paperwork for the system, if you have it
- Tell us about parking and loading
How to get a quote
The quickest way to a quote is to send pictures: the inside and outside of the property where the work is, plus the rating plate of any unit already there. Tell us the address and what you need, and many jobs can be priced from that.
Related advice
Why deal with it now?
A sudden boiler failure rarely leaves room to plan a heat pump properly. Planning ahead gives time for the heat loss survey, the design and the grant application before you need the heat. Small faults tend to grow, so it’s worth dealing with them early.
Leaving a fault or an overdue service rarely makes the work cheaper. Small problems, from blocked filters to slow leaks, tend to get worse, and a struggling system uses more electricity to do less. If you’re not sure what’s needed, phone us on 07833 053749 or write to us at info@aircondoctor.co.uk and we’ll give you an honest view and a fixed price.
Why people in Blackmoor choose us
- Members of Checkatrade
- An F-Gas certified company, as the law requires
- We work on all the leading brands
- MCS certified heat pump installers
Read what air conditioning costs and how to check a contractor.
Blackmoor questions
Will a heat pump in Blackmoor need planning permission?
The answer turns on the property and where the outdoor unit would sit. The centre of Blackmoor is in the Blackmoor Conservation Area. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit can’t face a road. Where needed, we check with East Hampshire council, which is usually the planning authority for Blackmoor.
Can I get the Boiler Upgrade Scheme grant in Blackmoor?
Blackmoor is covered, as the scheme runs across England and Wales. The grant is £7,500 for an air source (air-to-water) heat pump and £2,500 for an air-to-air system that replaces the existing fossil-fuel heating. The installer applies, and we are MCS certified.
Do you protect the property while you work?
We put dust sheets over floors and furniture near the work first, and we tidy up as we go. Before we leave, we clear up and run through the work with you.
How does the warranty work?
Warranty is the manufacturer’s own, on its terms. Terms differ by brand, and we set them out on your quote.
Do you work for landlords and businesses?
Yes. From a single let flat to offices, shops and public buildings, the approach is the same: survey or diagnosis, a fixed price and proper paperwork.
What does F-Gas certified mean?
Companies working on equipment that contains F gas must be certified by an approved body, and the engineers need their own qualifications. It’s how you know the refrigerant is being handled legally and safely.
Which type of heat pump is right for my home?
Air-to-water suits homes with radiators and a cylinder; air-to-air suits rooms that need heating and cooling. The survey helps decide. We install both types.
Heat pumps in Blackmoor: local notes
About 73% of households live in detached or semi-detached houses, according to the 2021 Census. Detached and semi-detached houses normally have room for the outdoor unit and a cylinder.
If your home is one of the older properties near St Matthew's Church, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen. Every heat pump design starts with a room-by-room heat loss calculation.
Blackmoor is about 5 miles south-east of Alton, in Hampshire. For air source heat pumps in and around Blackmoor, please give us a ring on 07833 053749, or email if that’s easier for a fixed-price quote. We work across London and the South East, Blackmoor included. Our list for Hampshire has 683 entries and Blackmoor is among them. We also work in Guildford, around 17 miles away.
Not far from Blackmoor, a recent job of ours was on Petworth Road, Haslemere (GU27), about 7 miles east: installing a Mitsubishi Electric multi-split system serving the master bedroom, two further bedrooms and the basement games room.
Our engineers cover all of GU33 for air source heat pumps and the roads nearby. Local streets include Blackmoor Road and Sotherington Lane, each of them within reach. If you’re just outside Blackmoor, we cover Woolmer (1 mile south-east), Greatham (1 mile south), Longmoor (2 miles south-east), Passfield (2 miles east) and Weavers Down (3 miles south-east). We also work in nearby towns such as Basingstoke (15 miles north-west), Farnborough (15 miles north), Fleet (13 miles north) and Horndean (14 miles south-west).
What’s near Blackmoor
Around Blackmoor, our work takes us to homes and businesses near Mill Chase Academy and the streets around them. For rail, the closest station is Liss station, about 3.5 miles south. A little further out are The Romany Museum (2.3 miles west) and Chase Community Hospital (1.4 miles north-east). Not far away are Selborne Hill and Deadwater Valley.
Let and managed properties
We work for landlords, letting agents and managing agents as well as homeowners and businesses. Tell us who the contact on site is and who should receive the paperwork, and we will keep everyone informed.
Running several properties is easier with one contractor. We work across London and the South East, so work at different addresses can be planned together and kept on a regular cycle.
Also in Blackmoor
Pricing air source heat pumps in Blackmoor
The survey or diagnosis tells us what the work involves. We look at:
- Whether it’s a one-off job or part of a maintenance contract
- The condition of any existing system
- Access, including height, roofs and ladders
Putting several jobs into one visit can make for a more efficient booking. Mention every unit or room you need covered and we’ll price it together.
Asking for a quote
The more you tell us, the more accurate the quote. With your enquiry, please include:
- The fuse board and where it is in the property
- Any previous service or F-Gas records
- Any error code or flashing light on the display
If you need air source heat pumps in Blackmoor, call us on 07833 053749 or write to us at info@aircondoctor.co.uk. Tell us what kind of property it is and what you’d like done, and send a few pictures if you can. We reply the same working day.
From one of our customers
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath