Essex · Heat pump installation

Heat pump installation in Bentley, Essex

For MCS certified installation of air source heat pumps for heating and hot water, with the Boiler Upgrade Scheme grant applied for in Bentley, one call is all it takes: diagnosis, fixed price, work and sign-off. F-Gas certified, NICEIC approved and Checkatrade members.

  • Wanting to stop using oil, LPG or gas for heating
  • Deciding on the outdoor unit position
  • Questions about listed buildings or conservation areas

Air source heat pumps in Bentley and nearby

What we do, step by step

The visit goes in the diary at a time that works for you, and we let you know if plans need to move. On arrival, the engineer compares the job with the survey, your pictures or the details you gave us. Anything unexpected is raised with you before we go further. After that, it takes a few days on site, depending on the cylinder, the radiators and the pipework involved. Work in Bentley is booked in advance at a time that suits you.

  1. We find out about your home and the heating you have now.
  2. We measure heat loss for every room.
  3. From those figures we size the heat pump and decide on radiators, cylinder and outdoor position.
  4. Cost, grant and VAT appear on one fixed-price quote.
  5. Installation, commissioning and MCS registration complete the job.

Before we arrive

  • Let us know if the units are on a roof, a high wall or in a locked area
  • Make sure we can reach the consumer unit or fuse board
  • Give us access to the outside wall, roof or yard where the outdoor unit sits

Ask for a quote

To help us quote: where the property is and what kind of building it is, a few pictures, the make and model of any existing system and anything you’ve noticed, such as an error code or a noise. Once you have those, call 07833 053749 or fill in the contact form.

Get a quick quote

Advice

Air source heat pumps in Bentley, done properly

Heat pumps run at lower flow temperatures than most boilers which means some radiators may need upsizing. We check each radiator against the room’s heat loss and anything that needs changing is in the quote. The work covers radiator systems, underfloor heating and homes heated by oil, LPG or gas, and common reasons people get in touch are checking emitters for a heat pump and not knowing whether a grant applies.

In a place like Bentley, some homes are listed, and permitted development doesn’t cover listed buildings, so we check consent first.

AirCon Doctor is an F-Gas certified company and NICEIC approved for electrical work, with MCS certification for heat pumps and Checkatrade membership. Our engineers hold the F-gas qualifications needed to work on refrigerant.

Place
Bentley (CM14, CM15)
Region
Essex
Prices
£8,000–£16,000 before the grant, 0% VAT on homes
Accreditations
F-Gas certified company, NICEIC approved, MCS
Quotes
A fixed-price quote up front
Telephone
07833 053749
Last updated
30 October 2026

Air source heat pumps in Bentley: the local picture

About 50% of homes across Bentley and its surrounding area date from 1945 to 1972, according to Valuation Office Agency council tax records. Homes of that age often have cavity walls that may or may not be insulated, which the survey checks.

Hare Hall, roughly 4.8 miles south-west, is a reminder to check your home’s listing status: permitted development doesn’t cover listed buildings.

Bentley is about 2 miles north-west of Brentwood, in Essex. Whatever kind of property you have in Bentley, we can help with air source heat pumps. We reply to enquiries the same working day, and there’s a 24/7 emergency line. Count every place we list in Essex and you reach 644, with Bentley on the list. London is in our area too, around 18 miles away.

Every address in CM14 and CM15 is within our area, from busy streets to back roads. Mores Lane and Ashwells Road and the roads off them are all inside our area. Close to Bentley, our area also takes in Navestock Side (1 mile north-west), Coxtie Green (1 mile south), Doddinghurst Common (1 mile north-east), Horseman Side (1 mile west) and Crow Green (1 mile east). Larger places within reach include Chelmsford (11 miles north-east), Basildon (10 miles south-east), Harlow (11 miles north-west) and Billericay (7 miles east).

Landmarks near Bentley

Around Bentley, our work takes us to homes and businesses near The White Horse pub and Weald Country Park and the streets around them. Bentley’s nearest station is Brentwood station, about 2.8 miles south-east. Well-known places in the area include Brentwood Community Hospital (2.8 miles south-east). For a walk, there’s Warley Place.

Map of Bentley © OpenStreetMap contributors

Bentley: your questions answered

Do I need planning permission for a heat pump in Bentley?

There’s no single answer: the building and the outdoor unit position decide it. The half-mile around the middle of Bentley holds about 8 listed buildings and structures. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights do not reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask the local planning authority (for Bentley, typically Brentwood council).

Is Bentley within the area you cover?

Yes. Bentley is within the area we cover across London and the South East. Send a few details and pictures, and we reply the same working day.

Do you work on systems someone else installed?

Yes. We look at it first and tell you what we find, including anything about the original installation that needs putting right. You get a fixed price before any work goes ahead.

What’s the price of a heat pump installation?

Expect £8,000–£16,000 for an air-to-water system, with 0% VAT on homes, before the grant is taken off. The heat pump size, radiator changes and the cylinder decide where in that range you are. Air-to-air is priced after a survey.

What does F-Gas certified mean?

The law says any company working on equipment containing F gas has to be certified, and the engineers need their own qualifications. It means the refrigerant in your system is handled legally.

Can I get the Boiler Upgrade Scheme grant?

Eligibility depends on the property and the scheme rules. In England and Wales, the scheme offers £7,500 towards an eligible air-to-water or ground source heat pump, and £2,500 towards an air-to-air heat pump only in limited cases, and we check before you commit.

What accreditations do you have?

As the law requires for refrigerant work, we are an F-Gas certified company. NICEIC approval, MCS certification for heat pumps and Checkatrade membership sit alongside it.

How the job changes from property to property

The Boiler Upgrade Scheme

The Boiler Upgrade Scheme covers England and Wales: £7,500 for air-to-water and ground source, and £2,500 for air-to-air in limited cases. The installer applies.

VAT on heat pumps

Installing an air source heat pump in a home is zero-rated until 31 March 2027, then 5% following HMRC’s rules on energy-saving materials. It doesn’t apply to businesses.

For landlords and property managers

We regularly work with managing agents. Tell us the property, the work and the access arrangements and we will come back with a fixed-price quote.

Larger air conditioning systems in buildings need more than servicing: a TM44 inspection by an accredited energy assessor is required at least every 5 years for systems over 12 kW. We can arrange it, prepare the system for it and fix what it finds.

When to call us in Bentley

People also ask about air-to-air heat pumps because they heat and cool. They warm rooms directly through indoor units and switch to cooling in warm weather. The grant only applies in some cases, so we check first.

These are the situations we see most often:

  • Finding a place for the outdoor unit
  • Questions about listed buildings or conservation areas
  • Comparing heat pump types

Period properties close to Church of St Paul can suit a heat pump, though insulation and any heritage protection are checked first.

What your quote should include

  • Why the equipment they’re quoting suits the job
  • Whether the quote is a fixed price
  • Exactly what the price includes, from supply and fitting to commissioning

Our hiring checklist

A customer’s words

“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”

Sarah M., East Grinstead

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead