Greater London · Heat pump installation
Heat pump installation in Bakers Arms, Greater London
Air source heat pumps in Bakers Arms from an F-Gas certified company, with the manufacturer’s warranty terms explained on your quote. Enquiries answered the same working day.
- Checking eligibility for a heat pump grant
- Ageing boilers that will need replacing
- Checking emitters for a heat pump
Rented and managed buildings
The F-gas rules share responsibility for leak checking between the equipment’s operator and the service technicians. In a let or managed building, it’s worth agreeing who that operator is, and we can work for either side.
When the building owner and the occupier are different, the lease or tenancy agreement normally sets out who maintains what. We are happy to deal with either side, and the paperwork can go to both.
Air source heat pumps for homes and businesses in Bakers Arms
Until 31 March 2027, a heat pump installed in residential accommodation carries 0% VAT, with 5% from 1 April 2027. That follows HMRC Notice 708/6, and it doesn’t apply to businesses, and for air-to-air systems we confirm the VAT on your quote. This is general information, not tax advice. The work covers homes heated by oil, LPG or gas, air-to-water heat pumps and hot water cylinders, and common reasons people get in touch are choosing between air-to-water and air-to-air and questions about listed buildings or conservation areas.
In a London area like Bakers Arms, many homes are flats or terraces with little outside space, and that decides which kind of heat pump works. Air-to-water needs room for the outdoor unit and typically a cylinder, while air-to-air units take less room.
For a fault on a system that may still be under warranty, send us the make, model and installation date. We will explain how the manufacturer’s terms are likely to apply before anything chargeable is done.
- Place
- Bakers Arms (E17, E10, E11)
- Region
- Greater London
- Certified
- F-Gas certified company, NICEIC approved, MCS
- Guide price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Quotes
- A fixed-price quote up front
- Call
- 07833 053749
- Last updated
- 30 October 2026
How it works
The visit has three parts, a bit like a doctor’s appointment: diagnose, treat and sign off. First we check the system or the space against the plan, then the work itself, and finally everything is tested, recorded and explained. Most of the time goes on the middle part, and that takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. Managed buildings in London often need contractors booked in, and we can deal with the agent for a job in Bakers Arms.
- It starts with a conversation about the home, the existing heating and your plans.
- A heat loss survey works out how much heat each room needs, and we look at the radiators, the cylinder space and where the outdoor unit could go.
- You get a fixed-price quote, with any grant you’re eligible for and the VAT explained.
- The outdoor unit, the indoor equipment and the controls are installed and connected.
- We commission the heat pump, complete the MCS paperwork and talk you through the controls.
Before we arrive
- Give us access to the outside wall, roof or yard where the outdoor unit sits
- Mention any roof access, ladders or high-level work
- Mention any parking restrictions near the property
Get a fixed-price quote
VAT is set out clearly on every quote, with the rate that applies to your job. Homes, businesses and different kinds of work can be treated differently for VAT, so we confirm it on the quote. For a fixed-price quote, phone 07833 053749 or use the quote form.
Advice
When to call us in Bakers Arms
Homes with electric heating sometimes look at heat pumps as an alternative. A survey shows whether a heat pump suits the property and what would need to change, and we explain the grant position for your home.
Common reasons people call us include:
- Checking whether planning permission is needed
- Ageing boilers that will need replacing
- Checking eligibility for a heat pump grant
Historic houses such as Sutton House, about 2.5 miles south-west, are a reminder that listed homes need consent before a heat pump goes in.
What to look for in a quote
- Which VAT rate the quote uses, and why
- Whether the electrical work is done by a registered contractor, such as NICEIC approved
- Whether the manufacturer’s warranty depends on regular servicing
Air source heat pumps around Bakers Arms
About 61% of homes in and around Bakers Arms were built before 1919, according to VOA council tax data, and about 48% of households live in flats, according to the 2021 Census. Period properties can still suit a heat pump, but the design has to start from accurate heat loss figures. Flats are often harder for air-to-water systems, so we look at whether air-to-air suits better. London homes can be short of space for an outdoor unit and cylinder, which affects the choice of heat pump.
Older homes near St Stephen's may need extra checks for planning and heat loss before a heat pump is designed.
Bakers Arms is about 4 miles north-east of Shoreditch, in Greater London. Homes and businesses alike in Bakers Arms, our engineers can help with air source heat pumps. We reply to enquiries the same working day, and there’s a 24/7 emergency line. Our area takes in 764 places across Greater London, large and small. Our London page covers places nearby (6 miles or so).
Not far from Bakers Arms, a recent job of ours was on Greenwich High Road, Greenwich (SE10), about 7 miles south: installing a Mitsubishi Electric wall-mounted unit in the retail area and a second unit in the stockroom and office.
Streets in the area include Ivy Road, Ely Road and Elm Road, all of which are in our area. Every address in E17, E10 and E11 is covered. If you’re just outside Bakers Arms, we cover Walthamstow Village (1 mile north), Leyton (1 mile south), Leyton Grange (1 mile south), Walthamstow (1 mile north-west) and Upper Walthamstow (1 mile north-east). Larger places within reach include London (6 miles south-west), City of Westminster (7 miles south-west), Marylebone (7 miles south-west) and Kensington (10 miles south-west).
Near you in Bakers Arms
Locally, jobs take us to houses, flats and workplaces close to The European pub, Leyton Sixth Form College and Warwick School for Boys and the streets around them. Bakers Arms’s nearest station is Leyton Midland Road station, about 0.5 miles south-east. Other landmarks nearby include Walthamstow Pump House Museum (0.9 miles west) and 17 & Central (0.7 miles north-west). Green spaces nearby include Hollow Pond and Ainslie Wood.
When something else is needed
Air source heat pumps cannot fix everything, and we will tell you before we start. It does not solve:
- A grant for a home that doesn’t meet the scheme rules
- Gas boiler work, such as disconnecting the old boiler, which needs a Gas Safe registered engineer
- Formal advice on VAT for your situation
If in doubt, call us on 07833 053749 or send an email and we will say what we think before you book.
Parts of the system we cover
- Radiator systems
- Hot water cylinders
- Air-to-water heat pumps
- Air-to-air heat pumps
- Homes heated by oil, LPG or gas
- Underfloor heating
Nearby places to Bakers Arms
Other services in Bakers Arms
Questions from Bakers Arms
Will a heat pump in Bakers Arms need planning permission?
There’s no single answer: the building and the outdoor unit position decide it. Central Bakers Arms sits inside the Bakers Arms Conservation Area. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit can’t face a road. Where needed, we check with the local planning authority (for Bakers Arms, normally Waltham Forest council).
Does the Boiler Upgrade Scheme cover homes in Bakers Arms?
Yes, if the home and the heat pump meet the scheme’s rules: Bakers Arms is in England, where it applies. The grant is £7,500 for an air source (air-to-water) heat pump and £2,500 for an air-to-air system that replaces the existing fossil-fuel heating. The installer applies, and we are MCS certified.
What accreditations do you have?
F-Gas company certification, NICEIC approval for electrical work and MCS certification for heat pumps, plus Checkatrade membership. Our engineers also hold the individual F-gas qualifications needed to work on refrigerant.
Do you work on systems someone else installed?
Yes. Systems fitted by other companies are fine, on all the main brands. Send us the make and model, and any records you have.
How long does a heat pump installation take?
As a guide, it takes a few days for most air-to-water installations, with air-to-air systems often quicker. We plan the work so you are without heating for as little time as possible and agreed before any work starts.
Can we book visits on a schedule?
Yes. We offer maintenance contracts, with visits at the interval your system and the manufacturer need. Each visit is recorded and F-Gas records kept where they apply.
Do you cover Bakers Arms?
Yes. We cover Bakers Arms and across Greater London, as part of our area across London and the South East. For a fixed-price quote, ring 07833 053749 or use the quote form.
From one of our customers
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath