Kent · Heat pump installation
Heat pump installation in Aldington Frith, Kent
Air source heat pumps in Aldington Frith from an F-Gas certified company, with the manufacturer’s warranty terms explained on your quote. We reply to enquiries the same working day.
- Working out where a cylinder could go
- Checking eligibility for a heat pump grant
- Checking emitters for a heat pump
Air source heat pumps for homes and businesses in Aldington Frith
Air source heat pumps collect heat from outdoor air and bring it inside with electricity running the compressor and fans. The technology is close to air conditioning, which is why we install both, and air-to-air heat pumps are sometimes simply called air conditioning. Common call-outs are for deciding which kind of heat pump suits the home and checking emitters for a heat pump, on air-to-water heat pumps, homes heated by oil, LPG or gas and hot water cylinders.
If your home in or near Aldington Frith is heated by oil, LPG or electric heaters with no mains gas, the Boiler Upgrade Scheme adds an extra £1,500 until March 2027 for an air source or ground source heat pump.
Warranty on the equipment is the manufacturer’s own, on the manufacturer’s terms, and we explain those terms on your quote. Each brand sets its own conditions, and we’re happy to talk you through them.
- Location
- Aldington Frith (TN25)
- Wider area
- Kent
- Typical price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Pricing
- Fixed, in writing
- Credentials
- NICEIC approved, F-Gas certified, MCS
- Telephone
- 07833 053749
- Page updated
- 30 October 2026
Heat pumps in Aldington Frith: local notes
About 45% of homes in Aldington Frith and the neighbourhoods around it have been built since 2000, according to the Valuation Office Agency’s council tax figures, and about 79% of households live in detached or semi-detached houses, according to Census 2021 figures. Lower heat loss in recent homes often means a smaller heat pump and fewer radiator changes. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
With Westenhanger Castle about 5 miles east, it’s worth asking whether your own home is listed before planning a heat pump. Every heat pump design starts with a room-by-room heat loss calculation.
Aldington Frith is about 4 miles south-east of Ashford, in Kent. Our engineers cover Aldington Frith for air source heat pumps, along with the rest of Kent. Aldington Frith is one of 922 places in Kent where we work for homes and businesses. You can also see our page for Eastbourne, about 35 miles away.
The closest recent job we can point to from Aldington Frith was on Mermaid Street, Rye (TN31), about 13 miles south-west: installing three Fujitsu wall-mounted units in guest bedrooms, with the outdoor units positioned in the hotel’s walled rear garden.
Streets in the area include Frith Road, Bourne Road and Priory Road, and we cover them all. We work across TN25 and the roads nearby. We also cover the places around Aldington Frith: Bonnington (1 mile south-east), Clap Hill (1 mile east), Aldington (1 mile east), Stonestreet Green (1 mile east) and Postling Green (2 miles south-east). Larger places within reach include Ashford (4 miles north-west), Canterbury (15 miles north-east), Folkestone (11 miles east) and Faversham (15 miles north).
Near you in Aldington Frith
We fit and service air conditioning in homes and premises around Poulton Wood, among other places. The nearest railway station is Ham Street station, about 3.3 miles south-west of the centre. Other landmarks nearby include Ashford Designer Outlet (3.4 miles north-west) and Lympne Castle (4.9 miles east). The countryside around Aldington Frith includes Hatch Park.
Aldington Frith questions
Is planning permission needed for a heat pump in Aldington Frith?
The answer turns on the property and where the outdoor unit would sit. The centre of Aldington Frith is in a conservation area. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with the planning department at Ashford council, usually the authority for Aldington Frith.
Do you cover smaller places like Aldington Frith?
Yes, smaller places are covered as well as towns. We’re based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Will skipping a service affect the warranty?
It depends on the manufacturer’s terms. Some manufacturers make regular servicing by a qualified engineer a condition of the warranty, so it’s worth checking. Either way, keep a record of every service.
What VAT do I pay on a heat pump?
Heat pumps in homes carry 0% VAT until 31 March 2027, with 5% from 1 April 2027. It doesn’t apply to businesses, and this is general information rather than tax advice.
Is the equipment covered by a warranty?
It’s the manufacturer’s warranty, which varies by brand. Daikin, for example, gives a standard 2 years on split air conditioning, and we explain the terms for whichever brand you choose.
What accreditations do you have?
F-Gas company certification, NICEIC approval for electrical work and MCS certification for heat pumps, and we are Checkatrade members. Engineers who handle refrigerant hold their own F-gas qualifications as well.
Who has to arrange F-Gas leak checks?
The F-gas rules share it between the equipment’s operator and the engineers who work on it. The interval depends on the refrigerant charge, measured in tonnes of CO2 equivalent: at least yearly for 5 to under 50 tCO2e, and every 6 months for 50 to under 500 tCO2e.
Also near Aldington Frith
Also in Aldington Frith
What happens on the day
Where something has to be switched off during the work, we agree it with you first so it does not catch you out. In a business, work can often be done one area at a time. On site, it takes from a couple of days to around a week, depending on the system and how much of the heating changes. We plan the trip to Aldington Frith around you.
- We find out about your home and the heating you have now.
- We measure heat loss for every room.
- We design the system, check the radiators and cylinder and look at the outdoor unit position.
- Cost, grant and VAT appear on one fixed-price quote.
- We install, commission and register the system under MCS.
Preparing for the visit
- Clear a path to the units and the space around them
- Tell us about parking and loading
- Let us know where the consumer unit is
Get a fixed-price quote
For a fixed-price quote, call us on 07833 053749 or email us with the address and a few details about the rooms or units involved. A few photos make it quicker. You’ll hear back from us the same working day.
Read more
Different systems, different jobs
Hot water cylinders
The cylinder size depends on how much hot water the household uses.
Air-to-water heat pumps
Air-to-water systems take heat from the air and put it into your central heating and hot water. It replaces the boiler as the main heat source, and is MCS certified when we install it.
After we’ve gone
Once we’ve finished, these simple steps help:
- Leave indoor units unobstructed
- Let the heat pump run steadily, as set up at handover
- Seal draughts where you can
Once commissioned, we register the installation with MCS and give you the certificate. File it with the warranty documents, as you may need it later.
Have the system serviced regularly. Check the manufacturer’s terms, as they may include servicing conditions.
What you can do yourself, and what needs us
On air conditioning, the filters in the indoor unit are usually the one part owners can clean, if the manual says so. They come out, get a gentle clean and go back only when they’re dry. For a heat pump, the main owner jobs are a clear outdoor unit and sensible control settings.
Owners can handle the everyday basics: keep the outdoor unit clear of leaves, plants and clutter, check the settings and the remote, and follow the cleaning the manual describes. Opening up the units, the electrics and the refrigerant circuit are a job for us.
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager