Buckinghamshire · Heat pump installation

Heat pump installers in Akeley

MCS certified installation of air source heat pumps for heating and hot water, with the boiler upgrade scheme grant applied for, for Akeley and the surrounding area. Ask us for a fixed-price quote, and we’ll reply the same working day.

  • A boiler that’s getting old
  • Radiators that may be too small for a heat pump
  • Comparing heat pump types

Air source heat pumps across Akeley

What owners can safely do

Leave the units and pipework where they are. Moving a unit involves the refrigerant circuit, so it needs an F-Gas qualified engineer, and the electrical side needs a competent person. Ask us to quote for a move instead.

Write down what you notice: error codes, noises, drips, smells or a drop in performance. It makes our diagnosis quicker, and a photo of the display helps even more.

How we handle air source heat pumps in Akeley

Every installation starts with a heat loss survey. That tells us how much heat the home needs, room by room, so the heat pump and the radiators or indoor units can be sized properly. Sizing by rule of thumb is not good enough. If the problem is questions about the Boiler Upgrade Scheme and deciding on the outdoor unit position, we can help.

Space for an outdoor unit is rarely an issue near Akeley, so the design focuses on heat loss and radiators.

Equipment warranty comes from the manufacturer, on its own terms, and we set them out on your quote. Each brand sets its own conditions, so we go through them with you rather than leave you to find the small print.

Place
Akeley (MK18)
Wider area
Buckinghamshire
Prices
Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
Pricing
A fixed-price quote up front
Accreditations
F-Gas certified company, NICEIC approved, MCS
Telephone
07833 053749
Reviewed
30 October 2026

What we do, step by step

The first job on site is protection: dust sheets over floors and furniture near the work and nothing is moved without asking you. Then the electrics are made safe and the work begins. It takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes, and we tidy up before we leave. If a lane or gateway near Akeley is tight for a van, let us know and we will plan for it.

  1. First, a chat about the property and your goals for the heating.
  2. We survey for heat loss and look at radiators, cylinder space and outdoor unit options.
  3. We explain which type of heat pump suits the home and whether a grant could apply.
  4. Installation follows on the agreed dates.
  5. We commission it, complete the MCS certificate and show you how to use it.

How to prepare

  • Mention any roof access, ladders or high-level work
  • Clear a path to the units and the space around them
  • Give us access to the outside wall, roof or yard where the outdoor unit sits

Getting a price

Photos are enough for some jobs; others need a visit first. Multi-room systems, commercial buildings and anything with a long or hidden pipe route are normally surveyed first. Either way, you get a fixed price before any work is booked.

Ask for a quote

Read more

Heat pumps in Akeley: local notes

At about 52 miles from central London, Akeley sits inside the area we cover across London and the South East.

Live in one of the older houses around Church of St Mary (Assumption of the Blessed Virgin Mary)? Expect the survey to look closely at heat loss and at the building’s planning status. Stowe House, roughly 2.1 miles west, is a reminder to check your home’s listing status: permitted development does not cover listed buildings.

Akeley is about 2 miles north of Buckingham, in Buckinghamshire. Akeley gets the same approach as every job we take on: diagnosis first, a fixed price and proper paperwork when we have finished. 263 places in Buckinghamshire are on our list, from busy centres to quieter spots. The nearest of our city pages is London, around 52 miles from Akeley.

Main Street, Church Hill and Capel Close and the roads off them are all inside our area. All of MK18 is within our area, from the main roads to the quietest streets. Close to Akeley, our area also takes in Lamport (1 mile west), Maids Moreton (1 mile south), Leckhampstead (1 mile east) and Lillingstone Lovell (2 miles north). Larger places within reach include Haydon Hill (15 miles south), Quarrendon Estate (15 miles south-east), Winslow (7 miles south-east) and Watermead (15 miles south-east).

Around Akeley

In Akeley, that means homes and buildings near The Bull & Butcher pub. Other landmarks nearby include Buckingham Community Hospital (2.1 miles south) and The Menagerie (2.1 miles west). Not far away are Buckingham Sand Pit.

Map of Akeley © OpenStreetMap contributors

Your questions about air source heat pumps in Akeley

Is Akeley within the area you cover?

We do. Villages and hamlets get the same service as the bigger towns. Visits to smaller places are planned so the engineer arrives with what the job needs.

Do I need planning permission for a heat pump in Akeley?

There’s no single answer: the building and the outdoor unit position decide it. Central Akeley is a short walk from the Akeley Conservation Area. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights don’t reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask the planning department at Buckinghamshire council, normally the authority for Akeley.

Does servicing affect my warranty?

Check the manufacturer’s terms. Some warranty terms require the system to be serviced regularly by a qualified engineer, so it’s worth checking. Keep every service record either way.

What warranty do I get?

The manufacturer provides it, on its own terms. Some brands make regular servicing a condition, so keep your service records.

Do I need new radiators for a heat pump?

We find out during the survey. Rooms where the radiator is big enough stay as they are and any changes are in the quote.

How quickly will you reply?

You’ll hear from us the same working day. If it’s an emergency, ring the 24/7 line instead.

Whose job is it to check the system for leaks?

The operator of the equipment, working with qualified engineers. Larger systems need regular checks: at least every 12 months from 5 tCO2e and every 6 months from 50 tCO2e. We can tell you which band your system falls into.

Landlords, agents and facilities managers

We regularly work with managing agents. Send the address, what’s needed and how access works, and we’ll send a fixed-price quote.

Bigger systems bring extra duties: systems with an effective rated output over 12 kW need a TM44 inspection by an accredited energy assessor at least every 5 years. We arrange the inspection, get the system ready and put right anything it picks up.

System by system

VAT on heat pumps

For air-to-air systems, HMRC’s view depends on the product and the situation and the VAT is confirmed on your quote.

Air-to-water heat pumps

The price for air-to-water is £8,000–£16,000 (0% VAT on homes), before the grant. A £7,500 grant may be available through the Boiler Upgrade Scheme for eligible homes, and we apply for it as the installer.

A customer’s words

“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”

James T., Crawley, office manager

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead