Kent · Heat pump installation
Heat pump installation in Acton, Kent
Air source heat pumps across Acton and nearby, from a site survey or diagnosis to sign-off and a fixed price agreed before we start.
- Checking whether planning permission is needed
- Deciding on the outdoor unit position
- Checking emitters for a heat pump
Air source heat pumps for homes and businesses in Acton
We install air source heat pumps in Acton and across Kent, and we’re MCS certified. There are two kinds: air-to-water, which heats radiators or underfloor heating and your hot water, and air-to-air, which warms rooms through indoor units and can also cool. We help you work out which suits your home. If you’re dealing with checking eligibility for a heat pump grant and an oil, LPG or gas boiler near the end of its life, we can sort it out.
Homes around Acton usually have room outside for a heat pump, so the design comes down to heat loss, radiators and hot water.
Looking after a system is mostly common sense: clear space around the outdoor unit, the cleaning the manual describes and a service at the recommended interval. That also helps where the warranty terms ask for regular servicing.
- Place
- Acton (TN30)
- Region
- Kent
- Certified
- F-Gas certified company, NICEIC approved, MCS
- Costs
- £8,000–£16,000 (0% VAT on homes), before the grant
- Quote
- Fixed-price quote after a site survey
- Telephone
- 07833 053749
- Checked
- 30 October 2026
What affects the cost of air source heat pumps
The survey or diagnosis tells us what the work involves. The main factors are:
- The equipment or parts the job needs
- What state the existing equipment is in
- The distance and route between the indoor and outdoor units
Leaving a fault or an overdue service rarely makes the work cheaper. Faults and wear in a system tend to grow, and a system working harder than it should costs more to run. If you’re not sure what’s needed, phone 07833 053749 or email us and we will give you an honest view and a fixed price.
Before you get in touch
To help us quote quickly, send us:
- Where the property is and what kind of building it is
- A close-up of the unit’s label showing the model number
- The paperwork from the last service, if you have it
Quoting starts with a diagnosis, either on a site survey or, for simple jobs, from your photos and details. Then you get a fixed price before any work starts.
How the visit works
There’s very little for you to do on the day. Someone needs to let us in and show us the units, or where they’re going, and the rest is down to us. Before we leave, the area is tidied and we explain what we’ve done. We agree a date with you and plan the visit to Acton so we arrive with what’s needed.
- You tell us about the home and what you want from a heat pump.
- A survey covers heat loss, radiators, hot water and where the outdoor unit could sit.
- We recommend air-to-water or air-to-air and check the grant position.
- The system is installed and connected to the controls.
- We commission it, complete the MCS certificate and show you how to use it.
Preparing for the visit
- Unlock any gate, garage or side passage we need
- Have the make and model of any existing unit to hand
- Tell us about access, such as roof hatches, high walls or locked plant areas
Getting a price
Quotes don’t take long. Call or email with a few details and we’ll come back to you the same working day. If we need to see the property first, we book a survey at a time that works for you.
Advice
What you can do yourself, and what needs us
Some faults have simple causes you can check first: check the mode, the set temperature, the remote’s batteries and the breaker. If the breaker trips a second time, leave it off and phone 07833 053749 or write to us at info@aircondoctor.co.uk.
For air conditioning, cleaning the indoor unit’s filters is the main job owners can do, if the manual says so. With the power off, they lift out, can be vacuumed or rinsed and must be fully dry before they go back. On a heat pump, the equivalent is keeping the outdoor unit clear and checking the controls.
Questions from Acton
Is planning permission needed for a heat pump in Acton?
The answer turns on the property and where the outdoor unit would sit. The centre of Acton is in a conservation area. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with Ashford council, which is usually the planning authority for Acton.
Is Acton within the area you cover?
We do. Villages and hamlets get the same service as the bigger towns. Send a few details and photos, and we reply the same working day.
What does an air-to-water heat pump cost?
£8,000–£16,000 (0% VAT on homes) for air-to-water, before the grant. The final price depends on the heat loss survey, the radiators and the cylinder and the quote is fixed.
Will skipping a service affect the warranty?
It depends on the manufacturer’s terms. Some manufacturers make regular servicing by a qualified engineer a condition of the warranty, so check the terms or ask us. Keep every service record either way.
Whose job is it to check the system for leaks?
Whoever operates the equipment, together with the technicians who service it. Larger systems need regular checks: at least every 12 months from 5 tCO2e and every 6 months from 50 tCO2e. We will work out which band applies to yours.
Do you have a 24/7 line?
Yes. If something urgent happens, like water coming from a unit or a critical room overheating, call our 24/7 line and we’ll tell you what to do first.
How much VAT is charged on a heat pump in a home?
For homes, currently none: until 31 March 2027 the rate is 0% in residential accommodation, then 5%. Businesses and hotels pay the standard rate, and with air-to-air we confirm the VAT on the quote. This is general information, not tax advice.
Air source heat pumps in Acton: the local picture
The 2021 Census found about 81% of households in detached or semi-detached houses. Detached and semi-detached houses normally have room for the outdoor unit and a cylinder.
Period properties close to Parish Church of St John the Baptist can suit a heat pump, though insulation and any heritage protection are checked first. Smallhythe Place lies about 1.5 miles north-west. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions.
Acton is about 10 miles south-west of Ashford, in Kent. For air source heat pumps in and around Acton, please call 07833 053749 or drop us a line for a fixed-price quote. We work across London and the South East, Acton included. Our list for Kent has 922 entries and Acton is among them. Eastbourne, roughly 25 miles off, has its own page on this site.
Our nearest recent job to Acton was on Mermaid Street, Rye (TN31), about 5 miles south: installing three Fujitsu wall-mounted units in guest bedrooms, with the outdoor units positioned in the hotel’s walled rear garden.
Our working area takes in TN30 in full. Nearby, we also cover air source heat pumps in The Stocks (1 mile south), Stone Corner (1 mile north-east), Wittersham (1 mile south-west), Reading Street (2 miles north-east) and Stone in Oxney (2 miles east). Further out, we also cover Ashford (10 miles north-east), Tenterden (4 miles north), Kennington (12 miles north-east) and New Romney (10 miles east).
Local landmarks in Acton
Locally, jobs take us to houses, flats and workplaces close to The Ewe And Lamb Inn. The nearest railway station is Appledore (Kent) station, about 4.4 miles east. Nearby you’ll also find Smallhythe Place (1.5 miles north-west) and Ypres Tower (4.9 miles south). The countryside around Acton includes Flatropers Wood.
Why act early in Acton
For eligible off-gas homes on oil or LPG, an extra £1,500 is on offer until March 2027. If that applies to you, it’s worth asking about sooner rather than later. An early booking makes the visit to Acton easier to arrange.
Typical ranges are on our prices page, but your price depends on the job in front of us. Call for a fixed-price quote, and we’ll explain what it covers.
Why choose AirCon Doctor in Acton
- We diagnose before we treat
- MCS certification for heat pump work
- Electrical work covered by our NICEIC approval
- Leading brands including Daikin, Mitsubishi Electric and Fujitsu
More services for Acton
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager