Kent · Heat pump installation
Heat pump installation in Reading Street, Kent
For air source heat pumps in Reading Street, choose an F-Gas certified, NICEIC approved company. A fixed price before work begins, and a 24/7 emergency line.
- Radiators that may be too small for a heat pump
- Checking whether planning permission is needed
- Questions about where the outdoor unit can go
Air source heat pumps in Reading Street
An air-to-water heat pump heats water to a lower temperature than a typical boiler which means some radiators may need upsizing. The survey shows which rooms are fine and which need changes, and the quote sets it out. If you’re dealing with plans to switch to electric heating with a heat pump and checking eligibility for a heat pump grant, we can sort it out.
Space for an outdoor unit is rarely an issue near Reading Street, so the design focuses on heat loss and radiators.
Whatever the visit, you get a written record: commissioning details for an installation, a fault and repair note for a repair, or a record of the service. Keep it with the system’s paperwork so it’s to hand next time.
- Location
- Reading Street (TN30)
- Region
- Kent
- Replies
- We reply the same working day
- Approvals
- NICEIC and F-Gas, MCS
- Quote
- A fixed price before work begins
- Guide price
- £8,000–£16,000 (0% VAT on homes), before the grant
- Phone
- 07833 053749
- Page updated
- 30 October 2026
Air source heat pumps in Reading Street: the local picture
About 81% of households live in detached or semi-detached houses, according to the 2021 Census. Houses normally have space for an outdoor unit and a hot water cylinder.
Live in one of the older houses around Church of St Mary? Expect the survey to look closely at heat loss and at the building’s planning status.
Reading Street is about 9 miles south-west of Ashford, in Kent. We cover Reading Street for air source heat pumps, along with the rest of Kent. Across Kent, we cover 922 places, Reading Street among them. For properties nearby, see our Eastbourne page (27 miles or so).
The closest recent job we can point to from Reading Street was on Mermaid Street, Rye (TN31), about 6 miles south: installing three Fujitsu wall-mounted units in guest bedrooms, with the outdoor units positioned in the hotel’s walled rear garden.
Our working area takes in TN30, every street of it. If you’re just outside Reading Street, we cover Stone Corner (1 mile south-west), Acton (2 miles south-west), Appledore Heath (2 miles east), Leigh Green (2 miles north-west) and Stone in Oxney (2 miles south-east). Further out, we also cover Ashford (9 miles north-east), Hythe (15 miles east), Tenterden (3 miles north-west) and Kennington (11 miles north-east).
Near you in Reading Street
For rail, the closest station is Appledore (Kent) station, roughly 3.3 miles east of the centre. A little further out are Smallhythe Place (1.8 miles west). Open spaces near Reading Street include Orlestone Forest.
Pricing air source heat pumps in Reading Street
Your quote is based on your property. We consider:
- Whether it’s a one-off job or part of a maintenance contract
- The electrical supply and whether a new circuit is needed
- The condition of any existing system
Typical ranges are on our prices page, but your price depends on the job in front of us. For a fixed-price quote, give us a ring on 07833 053749 or fill in the contact form, and we’ll explain what it covers.
What we need to know
What to send for a quote:
- A photo of the consumer unit with the cover closed
- A short video of any fault, such as a noise or a flashing light
- Your installation or service records
Want a quote for air source heat pumps? Please phone us on 07833 053749, or email if that’s easier and tell us about the job. We’ll explain what we’d recommend and why, then send a fixed-price quote before anything is booked.
Also near Reading Street
More services for Reading Street
What air source heat pumps can’t fix
We’d rather tell you now than sell you work that will not help, so these are the things it will not cover:
- Promising eligibility for the Boiler Upgrade Scheme
- Planning approval where permitted development doesn’t apply
- Tax rulings, which only HMRC can give
Not sure which it is? You can call 07833 053749 or send an email and we’ll tell you honestly.
What we work on in Reading Street
- Underfloor heating
- Air-to-air heat pumps
- Homes heated by oil, LPG or gas
- Hot water cylinders
- Radiator systems
- Air-to-water heat pumps
Do you need air source heat pumps in Reading Street?
Many enquiries start with a question about the Boiler Upgrade Scheme. Eligibility depends on the property, the system and the scheme rules and we confirm it before you go ahead.
Reasons to give us a call include:
- Questions about where the outdoor unit can go
- An oil, LPG or gas boiler near the end of its life
- Not knowing whether a grant applies
Historic houses such as Smallhythe Place, about 1.8 miles west, are a reminder that listed homes need consent before a heat pump goes in.
Comparing quotes
- Whether anyone has checked the property or the system first
- Whether you get F-Gas records where refrigerant is involved
- What the manufacturer’s warranty covers and for how long
Common questions in Reading Street
Is a heat pump in Reading Street permitted development?
The answer turns on the property and where the outdoor unit would sit. A conservation area takes in the middle of Reading Street. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with the planning department at Ashford council, typically the authority for Reading Street.
Is the heat pump grant available in Reading Street?
Reading Street is in England, where the Boiler Upgrade Scheme runs. The amount depends on the type of heat pump, and the survey confirms which applies. As an MCS certified installer, we apply for it on your behalf.
Do you survey before quoting?
Yes, every time. We diagnose before we treat: the survey tells us what the job needs and how to do it and the fixed price is built on it.
Is the equipment covered by a warranty?
It’s the manufacturer’s, and the terms are theirs. Some brands make regular servicing a condition, so keep your service records.
What’s the difference between air-to-water and air-to-air heat pumps?
It depends on your home, your heating and whether you want cooling. The grant is £7,500 for eligible air-to-water systems and £2,500 for air-to-air in limited cases, and we set out the options after the survey.
Do you work on commercial properties?
Yes. From a single let flat to offices, shops and public buildings, we work the same way: survey or diagnosis, a fixed price and proper paperwork.
Is Reading Street in your area?
Yes. We work in Reading Street and the rest of Kent, within the London and South East area we cover. To book, ring 07833 053749.
How the visit works
Think of the visit in three stages: look, put right and sign off. First we check the system or the space against the plan, then the work itself, and finally everything is tested, recorded and explained. Most of the time goes on the middle part, and that takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. For a village like Reading Street, tell us about narrow lanes, gates and parking when you book.
- It begins with your house and the heating it relies on now.
- We measure heat loss for every room.
- We design the system, check the radiators and cylinder and look at the outdoor unit position.
- A fixed-price quote explains the cost, the grant position and the VAT.
- Installation, commissioning and MCS registration complete the job.
Preparing for the visit
- Clear a path to the units and the space around them
- Keep pets out of the rooms we are working in
- Mention any managing agent or landlord rules we need to follow
Getting a quote
To get a fixed-price quote, ring us on 07833 053749 or send an email and tell us about the property and what you need. Photos help a lot. We reply to enquiries the same working day.
Advice
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager