Hampshire · Air conditioning installation
Air con installers in Tye
Our engineers work in Tye on supply, installation and commissioning of air conditioning for homes and businesses, from one room to a whole building. A look at the job first, a fixed-price quote and written records at the end.
- Too many options and no clear advice
- A system on old refrigerant that’s due for replacement
- Bedrooms and offices that overheat in summer
Before you call an engineer
Some faults have simple causes you can check first: check the mode, the set temperature, the remote’s batteries and the breaker. If the breaker trips a second time, leave it off and ring 07833 053749, or email if that’s easier.
On air conditioning, the filters in the indoor unit are usually the one part owners can clean, if the manual says so. They come out, get a gentle clean and go back only when they’re dry. For a heat pump, the main owner jobs are a clear outdoor unit and sensible control settings.
Air conditioning for homes and businesses in Tye
Any installation we do in Tye follows the same process as everywhere else we work: survey, fixed-price quote, a neat installation, full commissioning and the F-Gas paperwork. You know the price before we start and the paperwork is in your hands when we finish. People searching for “air con near me” in Tye want two things: a sensible price and someone qualified. We publish typical prices and do the refrigerant work as an F-Gas certified company.
The outdoor unit position is the biggest single decision: airflow, noise towards neighbours, pipe length and access for servicing all count.
Space outside is rarely the problem in a place like Tye. The questions are more often the age of the walls, the electrics and how far the pipes need to run.
Refrigerant work is written up in the F-Gas records: what was done, the refrigerant type and any amount added or recovered. Keep the records with the manual and the warranty documents, ready for the next service or a warranty query.
- Place
- Tye (PO11)
- Wider area
- Hampshire
- Response
- On the working day you ask
- Prices
- £1,200–£2,200 + VAT for one room
- Credentials
- NICEIC approved, F-Gas certified
- Quotes
- Fixed after a survey or photos
- Telephone
- 07833 053749
- Last updated
- 30 October 2026
Questions from Tye
Can I fit air conditioning in Tye without planning permission?
The answer turns on the property and where the outdoor unit would sit. Historic England lists about 5 buildings and structures within half a mile of the centre of Tye. Permitted development only covers heat pumps that are not used solely for cooling, and not within the grounds of a listed building. Conservation areas add limits on outdoor units facing a road. Where necessary, we check with Havant council, which is usually the planning authority for Tye.
Is the coast a problem for outdoor units in Tye?
It can. Tye is within about 1 mile of the coast, and salt air speeds up corrosion on outdoor units. The outdoor unit position, its fixings and regular servicing all help near the sea.
Is the equipment covered by a warranty?
The manufacturer provides it, on its own terms. Some terms depend on regular servicing by a qualified engineer so it’s worth keeping the service records.
Do you work in Tye?
Yes. Our area takes in London and the counties of the South East, and that includes Tye.
Can I do any of the installation myself?
No, not the refrigerant side. Under the F-gas rules, it must be done by qualified engineers from a certified company, and a new electrical circuit is notifiable building work unless a registered competent person does it.
Do you work for landlords and businesses?
Yes. We work for homeowners, landlords, letting and managing agents, and businesses of every size across London and the South East. Let us know who the records should go to.
Can I use air conditioning to heat a room?
In most cases, yes: modern splits are normally heat pumps, so they heat as well as cool. The Energy Saving Trust points out that an air-to-air heat pump is often just called air conditioning. We confirm the heating function of the model we quote.
What an install looks like in Tye
Tye lies within about 1 mile of the sea. That’s worth knowing for an install, as salt air speeds up corrosion on outdoor coils and fixings, so we choose the position and fixings with that in mind. About 80% of households live in detached or semi-detached houses, according to the last census (2021). With homes like that, finding a sensible outdoor unit position is rarely hard, and a multi-split lets two or more rooms run off it.
Around Church of St Peter, a quick check of the listing and conservation maps is part of planning any install.
Tye is about 3 miles south of Havant, in Hampshire. Wherever you are in the PO11 postcode area, we cover air conditioning. Tye is one of 683 towns, villages and districts in Hampshire we cover for homes and businesses. Worthing, roughly 24 miles off, has its own page on this site.
Not far from Tye, a recent job of ours was on East Street, Chichester (PO19), about 8 miles east: installing a Daikin wall-mounted unit in the dining area and a second unit serving the kitchen pass area. More about it
Gutner Lane and Copse Lane and the roads off them are all inside our area. We cover every part of PO11 for air conditioning and the streets around it. Neighbouring places we cover include North Hayling (1 mile north), Northney (1 mile north), Stoke (1 mile west), Thorney Island (1 mile north-east) and Warblington (2 miles north). Further out, we also cover Gosport (8 miles west), Havant (3 miles north), Fareham (11 miles west) and Horndean (7 miles north).
Landmarks near Tye
Locally, jobs take us to houses, flats and workplaces close to The Hayling College, Eames Farm and The Maypole pub. Tye’s nearest station is Emsworth station, roughly 2.6 miles north. Nearby you’ll also find Havant War Memorial Hospital (2.9 miles north-west) and Emsworth Museum (2.4 miles north). The countryside around Tye includes Hayling Billy.
Do you need air conditioning in Tye?
Some people come to us for heating rather than cooling. Old direct electric heaters turn electricity straight into heat, while a heat pump moves heat in from the outside air, so it gives out more heat than the electricity it uses. Most modern split systems work this way.
Keep an eye out for these signs:
- An office, shop or restaurant that is uncomfortable for staff and customers
- Rooms under the roof that stay hot into the night
- Old electric heaters you’d like to replace with something more efficient
Warblington Castle (roughly 2 miles north) shows the area has its share of heritage. A listed home needs consent before an outdoor unit or pipework goes on.
Questions to ask before booking
- Whether you get F-Gas records where refrigerant is involved
- What the manufacturer’s warranty covers and for how long
- Who does the electrical work, and whether they can certify it
More services for Tye
Looking after your system
So the system stays in good health:
- Keep the indoor unit’s filters clean
- Book an annual service
- Report drips, noises or error codes right away
You get the paperwork that matters: F-Gas records, commissioning details and the manufacturer’s warranty terms. File them together as they’re needed for servicing and any warranty question.
Report drips, noises or error codes early. A drip, a noise or a flashing light is often an early sign of a fault, and early repairs are usually simpler.
The process
Where something has to be switched off during the work, we agree it with you first, so you can plan around it. For businesses, we can typically work room by room or zone by zone. The work takes about a day for a single-room system, longer for multi-room and ducted systems. Seeing the property in photos first means the trip to Tye can be planned properly.
- We survey the rooms and the outside of the property, or work from pictures and details for simple jobs.
- The quote is fixed and shows the equipment, where each unit goes and what’s included.
- The indoor unit is fixed in place, the outside unit positioned, and the connecting runs put in tidily.
- Power is wired in, the joints are proved leak-tight under pressure and a vacuum pump draws out air and moisture.
- Finally, it’s commissioned, tested in each mode and handed over with the F-Gas records.
How to prepare
- Let us know where we can park and unload
- Find the manual or the paperwork for the system, if you have it
- Make sure someone can let us in at the agreed time
Getting a quote
Some jobs can be priced from photos, while others need a survey. Bigger systems, commercial sites and awkward pipe routes are normally surveyed on site. Either way, you get a fixed price before any work is booked.
Read more
From one of our customers
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead