West Berkshire · Heat pump installation
Heat pump installers in Wash Water
For air source heat pumps in Wash Water, one call is all it takes: diagnosis, fixed price, work and sign-off. An F-Gas certified company, NICEIC approved, on Checkatrade.
- Questions about where the outdoor unit can go
- Plans to switch to electric heating with a heat pump
- Questions about listed buildings or conservation areas
Air source heat pumps in Wash Water, done properly
In England, an air source heat pump on a house can often go in under permitted development rights. Conditions include a maximum outdoor unit size of 1.5 m³, compliance with MCS 020(a), use for more than cooling alone and a site outside the curtilage of a listed building. We check the rules for your property as part of the survey. If you are dealing with ageing boilers that will need replacing and wanting to stop using oil, LPG or gas for heating, we can help.
In a place like Wash Water, some homes are listed, and permitted development doesn’t cover listed buildings, so we check consent first.
If a fault appears while the equipment is under the manufacturer’s warranty, tell us the make, model and installation date. We will tell you how the manufacturer’s warranty is likely to apply before any chargeable work goes ahead.
- Where
- Wash Water (RG20)
- Region
- West Berkshire
- Quote
- Fixed after a survey or photos
- Certified
- NICEIC and F-Gas, MCS
- Costs
- £8,000–£16,000 (0% VAT on homes), before the grant
- Phone
- 07833 053749
- Reviewed
- 30 October 2026
Air source heat pumps in Wash Water: the local picture
About 83% of households live in detached or semi-detached houses, according to the last census (2021). Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
Period properties close to St Luke Church can suit a heat pump, though insulation and any heritage protection are checked first.
Wash Water is about 3 miles south-west of Newbury, in West Berkshire. Whether you are in the middle of Wash Water or further out, our engineers cover air source heat pumps, from a single room to a whole building. Wash Water is one of 155 places in West Berkshire we cover for homes and businesses. Guildford, roughly 35 miles off, has its own page on this site.
Whether you’re on Penwood Road and Andover Road or anywhere close by, our engineers can take on the work. Here we cover the RG20 postcode area. Close to Wash Water, our area also takes in Enborne Row (1 mile north-west), Wash Common (1 mile north-east), Newtown Common (1 mile east), Penwood (1 mile south-west) and Woolton Hill (1 mile south-west). Within a short drive, we also cover Newbury (3 miles north-east), Thatcham (5 miles north-east), Burghfield Common (13 miles east) and Speenhamland (3 miles north).
Near you in Wash Water
In Wash Water, that means homes and buildings near Park House School, Falkland Primary School and The Woodpecker pub and the streets around them. Wash Water’s nearest station is Newbury station, roughly 2.5 miles north-east. A little further out are British Balloon Museum & Library Ltd (2.8 miles north-east) and Hamstead Marshall 2 (2.9 miles north-west). Open spaces near Wash Water include Sidown Hill and Audrey's Meadow.
Also near Wash Water
Also in Wash Water
What the work involves, system by system
Heat loss surveys
Getting the survey right avoids undersized or oversized systems and that matters for comfort and running.
Air-to-air heat pumps
An air-to-air system heats rooms directly and can also provide cooling. Hot water needs a separate source so you will need another way to heat it.
Do you need air source heat pumps in Wash Water?
When a home is being extended or renovated, it’s a good moment to look at heat pumps. Pipework, radiators and space for a cylinder are easier to plan while work is going on.
Customers typically contact us when they notice one of these:
- Deciding which kind of heat pump suits the home
- Plans to switch to electric heating with a heat pump
- A boiler that is getting old
Highclere Castle lies about 2.7 miles south. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions.
Comparing quotes
- How VAT is shown, and which rate applies
- Proof of F-Gas company certification
- Whose warranty applies, and on what terms
How it works
Each visit follows the same order: agree the plan on site, put the dust sheets down, do the work, test what we have done and explain it all to you. On site, the work takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. For a place like Wash Water, the timing is set with you and the travel is our side of the planning.
- It begins with your house and the heating it relies on now.
- Every room’s heat loss is worked out on site.
- From those figures we size the heat pump and decide on radiators, cylinder and outdoor position.
- A fixed-price quote explains the cost, the grant position and the VAT.
- Installation, commissioning and MCS registration complete the job.
Before we arrive
- Tell us about any building rules, permits or sign-in
- Tell us about parking and loading
- Find the manual or the paperwork for the system, if you have it
Getting a quote
Getting a quote is straightforward. Send a few details and pictures, and we reply the same working day. If we need to see the property first, we book a survey at a time that works for you.
Related advice
What air conditioning will not do
We’d rather tell you now than sell you work that won’t help, so these are the things it will not cover:
- Disconnecting or servicing a gas boiler
- Tax rulings, which only HMRC can give
- Grants for hybrid systems or replacements of low-carbon systems
Not sure which it is? You can phone 07833 053749 or use the quote form and we’ll tell you honestly before booking.
Where we work
- Radiator systems
- Hot water cylinders
- Air-to-air heat pumps
- Underfloor heating
- Homes heated by oil, LPG or gas
- Air-to-water heat pumps
Wash Water questions
Can I fit a heat pump in Wash Water without planning permission?
There’s no single answer: the building and the outdoor unit position decide it. Around 3 listed entries sit within 0.5 miles of central Wash Water. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit can’t face a road. Where needed, we check with West Berkshire council, which is usually the planning authority for Wash Water.
Is Wash Water within the area you cover?
Yes, smaller places are covered as well as towns. A few photos and the postcode are enough to get things started.
When will I hear back?
You will hear from us the same working day. For a breakdown that cannot wait, call our 24/7 emergency line.
Can I do any of the installation myself?
The refrigerant side has to be done by a qualified engineer working for an F-Gas certified company. That’s the law, not just our preference, and manufacturers expect it for their warranty too. We are happy to quote for the full job, supply to commissioning.
Does the grant cover air-to-air heat pumps?
The air-to-air grant is £2,500, and only some homes qualify. The system has to replace the fossil-fuel heating and heat the whole home with an MCS certified installer.
How much time does a heat pump install need?
A typical installation takes a few days for most air-to-water installations, with air-to-air systems often quicker. We plan the work so you are without heating for as little time as possible, and we explain it in advance.
Who is responsible for leak checks?
The operator of the equipment, working with qualified engineers. Larger systems need regular checks: at least every 12 months from 5 tCO2e and every 6 months from 50 tCO2e. We can tell you which band your system falls into.
From one of our customers
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager