Essex · Heat pump installation
Heat pump installation in Totham Hill, Essex
Need air source heat pumps in Totham Hill? We diagnose first, fix the price and book the work around you, finishing with proper records.
- Replacing a combi boiler with a heat pump
- Radiators that may be too small for a heat pump
- Checking whether planning permission is needed
Air source heat pumps for homes and businesses in Totham Hill
We begin with a room-by-room heat loss survey. That tells us how much heat the home needs, room by room so the system is sized to match. Sizing by rule of thumb isn’t good enough. We are often asked to deal with replacing a combi boiler with a heat pump and finding a place for the outdoor unit, across homes heated by oil, LPG or gas, hot water cylinders and underfloor heating.
Homes around Totham Hill typically have room outside for a heat pump, so the design focuses on heat loss and radiators.
Equipment warranty comes from the manufacturer, on its own terms, and we set them out on your quote. Each brand sets its own conditions, and we are happy to talk you through them.
- Where
- Totham Hill (CM9)
- Region
- Essex
- Accreditations
- F-Gas certified, NICEIC approved, MCS
- Pricing
- A fixed-price quote up front
- Prices
- £8,000–£16,000 before the grant, 0% VAT on homes
- Telephone
- 07833 053749
- Reviewed
- 30 October 2026
What a heat pump looks like in Totham Hill
About 92% of households live in detached or semi-detached houses, according to Census 2021 figures. Detached and semi-detached houses typically have room for the outdoor unit and a cylinder.
Period properties close to Church of St Peter can suit a heat pump, though insulation and any heritage protection are checked first. Historic houses such as Layer Marney Tower, about 4.9 miles north-east, are a reminder that listed homes need consent before a heat pump goes in.
Totham Hill is about 4 miles south-east of Witham, in Essex. We cover Totham Hill for air source heat pumps, along with the rest of Essex. Totham Hill is one of 644 towns, villages and districts in Essex we cover. You can also see our page for London, roughly 39 miles from Totham Hill.
Postcode districts we cover here: CM9. Close by, we work in Little Totham (1 mile east), Tolleshunt Major (2 miles east), Goldhanger (3 miles south-east), Oxley Green (3 miles east) and Tolleshunt Knights (3 miles north-east). Further out, we also cover Colchester (11 miles north-east), Chelmsford (10 miles west), Braintree (10 miles north-west) and Maldon (4 miles south).
What’s near Totham Hill
Around Totham Hill, our work takes us to homes and businesses near The Bull Public House and the streets around them. For rail, the closest station is Witham station, about 3.5 miles north-west of the centre. Other landmarks nearby include Maldon & District Agricultural & Domestic Museum (3 miles south-east). The countryside around Totham Hill includes Shut Heath Wood.
Places near Totham Hill
More services for Totham Hill
What happens on the day
The first job on site is protection: sheets over the floor and any furniture nearby and nothing is moved without asking you. Then the electrics are made safe and the work begins. The work on site takes a few days on site, depending on the cylinder, the radiators and the pipework involved, and we clear up before we go. Work in Totham Hill is booked in advance at a time that suits you.
- You tell us about the home and what you want from a heat pump.
- A survey covers heat loss, radiators, hot water and where the outdoor unit could sit.
- We explain which type of heat pump suits the home and whether a grant could apply.
- The system is installed and connected to the controls.
- After commissioning, you get the MCS certificate and a handover.
Getting ready for the visit
- Keep pets and children away from the work area
- Make sure we can reach the outdoor unit, or where it will go
- Make sure we can reach the consumer unit or fuse board
Get a fixed-price quote
Quotes do not take long. Send a few details and photos, and we reply the same working day. Where a survey is needed, we arrange a time that suits you.
Read more
Honest limits
Not every problem is solved by air source heat pumps, and we’d rather say so up front. It doesn’t solve:
- Insulation work, such as loft or cavity wall insulation
- Any gas work on the existing boiler
- Tax rulings, which only HMRC can give
If you’re not sure, just phone us on 07833 053749 or email us and we’ll give you a straight answer before booking.
What the work covers
- Radiator systems
- Homes heated by oil, LPG or gas
- Underfloor heating
- Air-to-air heat pumps
- Hot water cylinders
- Air-to-water heat pumps
Totham Hill questions
Do I need planning permission for a heat pump in Totham Hill?
The answer turns on the property and where the outdoor unit would sit. Historic England lists about 7 buildings and structures within half a mile of the centre of Totham Hill. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights don’t reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask the local planning authority (for Totham Hill, normally Maldon council).
Is the heat pump grant available in Totham Hill?
Yes, if the home and the heat pump meet the scheme’s rules: Totham Hill is in England, where it applies. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. As an MCS certified installer, we apply for it on your behalf.
Can landlords and managing agents book you?
Yes. We work for homeowners, landlords, letting and managing agents, and businesses of every size across London and the South East. Let us know who the records should go to.
Why does F-Gas certification matter?
F-Gas certification shows a company is approved to work on equipment containing fluorinated gases, such as the refrigerant in air conditioning and heat pumps. In Great Britain, that certification is a legal requirement, not an optional extra, and AirCon Doctor is certified.
Can you come out in an emergency?
Yes. There’s a 24/7 emergency line for problems that cannot wait for a planned visit. Ring 07833 053749 any time and explain the problem.
Which accreditations do you hold?
As the law requires for refrigerant work, we are an F-Gas certified company. We’re also NICEIC approved, MCS certified for heat pumps and Checkatrade members.
Do I need to service the system to keep the warranty?
Each manufacturer decides. If servicing is in the terms, missing one could affect a claim, so we explain the terms on your quote.
Why deal with it now?
Planning rules have specific conditions. We look at the planning position early, so there are no surprises covering listed buildings, conservation areas and any Article 4 direction. A dirty or faulty system works harder and costs more to run.
Typical ranges are on our prices page, but each job is priced on what it involves. Call for a fixed-price quote, and we will talk you through it.
Why choose AirCon Doctor in Totham Hill
- Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba and more
- Clear warranty information from the manufacturer
- A site survey and a fixed-price quote
- Electrical work covered by our NICEIC approval
Read how installs are priced or our accreditations and certificates.
What affects the quote in Totham Hill
The price is fixed before any work begins. It takes into account:
- The condition of any existing system
- Which make and model is being fitted or worked on
- A single visit or a regular plan
Putting several jobs into one visit can make for a more efficient booking. Tell us about everything you’d like looked at and we’ll price it together.
What to send for a quote
A few details help us quote accurately. When you get in touch, it helps to send:
- The outdoor side of the property, including any roof or flat area
- Where the property is and what kind of building it is
- Any error code or flashing light on the display
Quoting starts with a diagnosis, either on a site survey or, for simple jobs, from your photos and details. After that, we send a fixed price before any work starts.
From one of our customers
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath