Essex · Heat pump installation

Heat pump installation in Tollesbury, Essex

Expert air source heat pumps for Tollesbury: a survey or diagnosis, a fixed price, careful work and proper paperwork. Call for a fixed-price quote.

  • Radiators that may be too small for a heat pump
  • Checking whether planning permission is needed
  • Deciding on the outdoor unit position

Need air source heat pumps in Tollesbury?

What a heat pump looks like in Tollesbury

At about 2 miles from the coast, Tollesbury is close enough for sea air to matter. Near the coast, we choose the outdoor unit position with salt-laden wind in mind. Central Tollesbury is inside the Tollesbury Conservation Area. On the National Heritage List, around 32 entries fall within 0.5 miles of the middle of Tollesbury; Tollesbury Hall (grade II*) is one. For a heat pump, permitted development doesn’t apply within the grounds of a listed building, and in a conservation area the outdoor unit can’t go on a wall or roof facing a road, so we check with Maldon council, normally the planning authority here where necessary. The last census (2021) found about 83% of households in detached or semi-detached houses. Detached and semi-detached houses normally have room for the outdoor unit and a cylinder.

Older homes near Church of St Mary the Virgin may need extra checks for planning and heat loss before a heat pump is designed. With Layer Marney Tower about 4.8 miles north, it’s worth asking whether your own home is listed before planning a heat pump.

Tollesbury is about 7 miles east of Maldon, in Essex. Whatever kind of property you have in Tollesbury, we can help with air source heat pumps. We reply to enquiries the same working day, and there’s a 24/7 emergency line. Our area takes in 644 places across Essex. Bromley, roughly 43 miles off, has its own page on this site.

If your postcode is in CM9, the property is within reach. Whether you are on Station Road, High Street and East Street or anywhere close by, we can help. Close to Tollesbury, our area also takes in Virley (2 miles north), Salcott-cum-Virley (2 miles north), St Lawrence Bay (3 miles south), Ramsey Island (3 miles south) and Bradwell Waterside (3 miles south-east). Within a short drive, we also cover Colchester (9 miles north), Chelmsford (15 miles west), Braintree (15 miles north-west) and Clacton-on-Sea (14 miles east).

Landmarks near Tollesbury

Around Tollesbury, our work takes us to homes and businesses near The King's Head Public House, among other places. Well-known places in the area include Maldon & District Agricultural & Domestic Museum (3.4 miles west). For a walk, there’s Tollesbury Wick.

Map of Tollesbury © OpenStreetMap contributors

How we handle air source heat pumps in Tollesbury

In England, an air source heat pump on a house can often go in under permitted development rights. Conditions include a maximum outdoor unit size of 1.5 m³, compliance with MCS 020(a), use for more than cooling alone and a site outside the curtilage of a listed building. We look at the planning position for your home during the survey. Common call-outs are for comparing heat pump types and plans to switch to electric heating with a heat pump, across air-to-water heat pumps, hot water cylinders and radiator systems.

For a home around Tollesbury that’s off mains gas and heated by oil or LPG, the Boiler Upgrade Scheme adds an extra £1,500 until March 2027 for an air source or ground source heat pump.

The records are your system’s health record: what was fitted or found, what was done and when. If anything goes wrong later, it helps the next engineer and the manufacturer, so keep it safe.

Where
Tollesbury (CM9)
Wider area
Essex
Certified
F-Gas certified company, NICEIC approved, MCS
Quote
Fixed-price quote after a site survey
Guide price
Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
Replies
Same working day
Phone
07833 053749
Checked
30 October 2026

For landlords and property managers

Under the GB F-gas rules, responsibility for leak checks is shared between whoever operates the equipment and the engineers who work on it. Where a building is let or managed, the lease or contract should make clear who looks after the system, and we can work for either side.

We also work for facilities teams in offices, schools and public buildings in Tollesbury and across Essex. Larger buildings can be done in stages around the people who use them.

Leave it or put it right?

If the emitters cannot give out enough heat, some rooms won’t get warm enough. Checking and upsizing them as part of the installation avoids that. Small faults tend to grow, so it’s worth dealing with them early.

Our prices page shows typical ranges, but each job is priced on what it involves. Call for a fixed-price quote, and we will talk you through it.

What you get with us

  • MCS certified heat pump installers
  • One contact for properties across the South East and London
  • Diagnosis first, then a fixed price
  • NICEIC approved for electrical work

Read what air conditioning costs and how to check a contractor.

Tollesbury questions

Do you cover smaller places like Tollesbury?

Yes. Tollesbury is within the area we cover across London and the South East. Send a few details and photos, and we reply the same working day.

Is the heat pump grant available in Tollesbury?

Yes, if the home and the heat pump meet the scheme’s rules: Tollesbury is in England, where it applies. The grant is £7,500 for an air source (air-to-water) heat pump and £2,500 for an air-to-air system that replaces the existing fossil-fuel heating. As an MCS certified installer, we apply for it on your behalf.

Do you have a 24/7 line?

Yes, 24/7. Call the emergency line and tell us the make, the symptoms and any error code, and we will advise on what to do next.

How soon will you get back to me?

The same working day. After that, we agree a survey, diagnosis or installation date that suits you, with a fixed price before work starts.

What does an air-to-water heat pump cost?

£8,000–£16,000 (0% VAT on homes) for air-to-water, before the grant. The final price depends on the heat loss survey, the radiators and the cylinder and the quote is fixed.

Which manufacturers do you install and repair?

The main ones, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. For new systems, we recommend a brand and model to suit the job and tell you why.

How much time does a heat pump install need?

As a guide, it takes a few days for most air-to-water installations, with air-to-air systems often quicker. We plan the work so you’re without heating for as little time as possible and agreed before work begins.

Safe owner checks

Some faults have simple causes you can check first: check the mode, the set temperature, the remote’s batteries and the breaker. If the breaker trips a second time, leave it off and phone us on 07833 053749 or fill in the contact form.

Owners can handle the everyday basics: keeping the outdoor unit clear, checking the mode and set temperature, and the routine cleaning in the manual. Opening up the units, the electrics and the refrigerant circuit are a job for us.

How it works

Think of the visit in three stages: look, put right and sign off. First we check the system or the space against the plan, then the work itself, and finally we test, record and explain. Most of the time goes on the middle part, and that takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. Pictures of the space and where the outdoor unit could go let us plan the work in Tollesbury.

  1. We start with your plans and the property.
  2. The survey checks heat loss, emitters, hot water and the outdoor unit position.
  3. We explain which type of heat pump suits the home and whether a grant could apply.
  4. The system is installed and connected to the controls.
  5. We commission it, complete the MCS certificate and show you how to use it.

Preparing for the visit

  • Dig out any previous service or F-Gas records
  • Make sure someone can let us in at the agreed time
  • Make sure we can reach the outdoor unit, or where it will go

How to get a quote

To help us quote: the address and the type of property, pictures of the rooms or units, the brand and model of anything already fitted and anything you’ve noticed, such as an error code or a noise. Once you have those, give us a ring on 07833 053749 or fill in the contact form.

Ask for a quote

Advice

What a customer said

“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”

David W., Haywards Heath

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead