Kent · Heat pump installation

Heat pump installation in Small Hythe, Kent

Our engineers work in Small Hythe on heat pump installation. A look at the job first, a fixed-price quote and written records at the end.

  • Checking whether planning permission is needed
  • Finding a place for the outdoor unit
  • An oil, LPG or gas boiler near the end of its life

Air source heat pumps in Small Hythe

Honest limits

A few issues sit outside what this work can do:

  • Insulation work, such as loft or cavity wall insulation
  • Tax advice on your own circumstances
  • Any gas work on the existing boiler

If you are not sure, just phone us on 07833 053749 and we’ll give you a straight answer before you book.

Where we work

  • Underfloor heating
  • Radiator systems
  • Air-to-water heat pumps
  • Homes heated by oil, LPG or gas
  • Air-to-air heat pumps
  • Hot water cylinders

About our air source heat pumps in Small Hythe

An air-to-water heat pump heats water to a lower temperature than a typical boiler, so radiators may need to be larger to give out the same heat. The survey shows which rooms are fine and which need changes and anything that needs changing is in the quote. The work covers air-to-air heat pumps, radiator systems and air-to-water heat pumps, and the jobs we see most are comparing heat pump types and ageing boilers that will need replacing.

Space for an outdoor unit is rarely an issue near Small Hythe, so the design focuses on heat loss and radiators.

If a fault appears while the equipment is under the manufacturer’s warranty, tell us the make, model and installation date. We will explain how the manufacturer’s terms are likely to apply before anything chargeable is done.

Where
Small Hythe (TN30)
Region
Kent
Approvals
NICEIC and F-Gas, MCS
Price guide
£8,000–£16,000 (0% VAT on homes), before the grant
Quote
A fixed price before we start
Call
07833 053749
Updated
30 October 2026

What we do, step by step

Our engineers arrive at the time agreed with you and check the plan with you first. Floors and furniture near the work are covered with dust sheets, and the electrics are made safe before any panel comes off. The work itself takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. Visits to Small Hythe are agreed with you in advance and planned so the job can be finished in one trip where possible.

  1. Step one is understanding the house, how it’s heated today and what you’d like to change.
  2. A heat loss survey works out how much heat each room needs, and we look at the radiators, the cylinder space and where the outdoor unit could go.
  3. You get a fixed-price quote, with any grant you’re eligible for and the VAT explained.
  4. The outdoor unit, the indoor equipment and the controls are installed and connected.
  5. Commissioning, MCS certification and a handover of the controls finish the job.

Getting ready for the visit

  • Let us know where we can park and unload
  • Make sure we can reach the consumer unit or fuse board
  • Keep pets and children away from the work area

How to get a quote

Some jobs can be priced from pictures, while others need a survey. Multi-room systems, commercial buildings and anything with a long or hidden pipe route are normally surveyed first. Either way, the quote is fixed before anything goes ahead.

Ask for a quote

Related advice

Common problems we fix in Small Hythe

Air-to-air systems interest people who want cooling in summer as well as heating. They heat rooms through wall, floor or ceiling units and switch to cooling in warm weather. The grant only applies in some cases, so we check first.

Keep an eye out for these signs:

  • Working out where a cylinder could go
  • Questions about the Boiler Upgrade Scheme
  • Finding a place for the outdoor unit

Live in one of the older houses around Church of St John the Baptist? Expect the survey to look closely at heat loss and at the building’s planning status.

What to look for in a quote

  • If the quote is based on a survey, pictures or a diagnosis
  • How extra work would be agreed if they find something unexpected
  • Whether the price is fixed or an estimate

Our hiring checklist

FAQs for Small Hythe

Can I fit a heat pump in Small Hythe without planning permission?

That depends on the building and where the outdoor unit goes. Central Small Hythe sits inside a conservation area. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights do not reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask the local planning authority (for Small Hythe, normally Ashford council).

Can I get the Boiler Upgrade Scheme grant in Small Hythe?

Yes, the scheme covers homes in England, including Small Hythe, if they qualify. The grant is £7,500 for an air source (air-to-water) heat pump and £2,500 for an air-to-air system that replaces the existing fossil-fuel heating. You don’t apply yourself: the MCS certified installer does, which is us.

Do you work on systems someone else installed?

Yes. We start with a proper look and tell you honestly what we find, including any issues with how it was fitted. Any work is priced before it goes ahead.

What warranty do I get?

Warranty is the manufacturer’s own, on its terms. Each brand sets its own conditions and periods, so we explain them on your quote.

Can we book visits on a schedule?

Yes. Tell us what you have and how it’s used and we will propose a schedule and quote for it. That can include the leak checks the F-gas rules require for larger systems.

Can I fit air conditioning or a heat pump myself?

Anything that involves the refrigerant needs an F-Gas qualified engineer from a certified company. That’s a legal requirement, and manufacturers expect it for their warranty too. We are happy to quote for the full job, supply to commissioning.

Do you protect the property while you work?

Protection goes down first: sheets over the floor and nearby furniture. Any drilling is agreed with you first, and we clear up the dust and offcuts when we finish.

Homes in Small Hythe and heat pumps

Census 2021 figures found about 69% of households in detached or semi-detached houses. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.

With Smallhythe Place about 0.2 miles south, it’s worth asking whether your own home is listed before planning a heat pump.

Small Hythe is about 10 miles south-west of Ashford, in Kent. Anywhere in TN30, we can help with air source heat pumps. In Kent alone we list 922 places, and Small Hythe is one. There’s also a page for Eastbourne, about 25 miles away.

Not far from Small Hythe, a recent job of ours was on Mermaid Street, Rye (TN31), about 6 miles south: installing three Fujitsu wall-mounted units in guest bedrooms, with the outdoor units positioned in the hotel’s walled rear garden.

If your postcode is in TN30, you’re inside the area we cover. Other places close to Small Hythe include Broad Tenterden (1 mile north), Tenterden (2 miles north), Strood (2 miles north-west), Rolvenden Layne (3 miles west) and Rolvenden (3 miles west). Larger places within reach include Ashford (10 miles north-east), Park Wood (15 miles north-west), Kennington (12 miles north-east) and New Romney (11 miles east).

Around Small Hythe

A little further out are Benenden Hospital (4.8 miles north-west) and Smallhythe Place (under half a mile south). Green spaces nearby include Flatropers Wood.

Map of Small Hythe © OpenStreetMap contributors

What affects the quote in Small Hythe

The survey or diagnosis tells us what the work involves. The main factors are:

  • The pipe route between the units
  • Whether the existing supply is suitable
  • Whether it’s a one-off job or part of a maintenance contract

Whatever the property, the quote works the same way: the equipment, the access, the work involved and the time it takes. Call for a fixed-price quote and we will go through it with you.

Asking for a quote

Simple jobs can often be priced from photos and some basics. Useful things to send:

  • Photos showing the indoor unit and the space around it
  • Where the property is and what kind of building it is
  • The rating plate or label on any existing unit

For a fixed-price quote, phone 07833 053749 with the address and a few details about the rooms or units involved. A few photos make it quicker. We reply to enquiries the same working day.

What a customer said

“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”

David W., Haywards Heath

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead