West Sussex · Heat pump installation
Singleton air source heat pumps
Need air source heat pumps in Singleton? We look at the job first, give you a fixed-price quote and do the work at a time that suits you, then sign it off with written records.
- Replacing a combi boiler with a heat pump
- Working out whether radiators need upsizing
- Moving away from fossil-fuel heating
Signs you need air source heat pumps in Singleton
A common reason is wanting to stop burning gas, oil or LPG. A heat pump runs on electricity and takes heat from the outside air, which is why it fits that aim.
It’s time to call us if you’re dealing with:
- Questions about the Boiler Upgrade Scheme
- A boiler that is getting old
- Questions about listed buildings or conservation areas
If your home is one of the older properties near The Parish Church of the Blessed Virgin Mary, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen.
What your quote should include
- Whether you get F-Gas records where refrigerant is involved
- What happens if the job turns out to be different on the day
- Why the equipment they’re quoting suits the job
Air source heat pumps for homes and businesses in Singleton
Many air source heat pumps can be installed as permitted development in England, without a planning application. The conditions include an outdoor unit of no more than 1.5 m³ and compliance with MCS 020(a), and the unit can’t be used solely for cooling or sit within the curtilage of a listed building. We check the rules for your property as part of the survey. We’re often asked to deal with checking eligibility for a heat pump grant and no space for a hot water cylinder, across underfloor heating, air-to-air heat pumps and radiator systems.
Space for an outdoor unit is rarely an issue near Singleton, so the design focuses on heat loss and radiators.
AirCon Doctor is an F-Gas certified company and NICEIC approved for electrical work, with MCS certification for heat pumps and Checkatrade membership. Refrigerant work is done by engineers who hold the F-gas qualifications the law requires.
- Location
- Singleton (PO18)
- Wider area
- West Sussex
- Enquiries
- On the working day you ask
- Accreditations
- NICEIC approved, F-Gas certified, MCS
- Quote
- A fixed price before any work starts
- Price guide
- £8,000–£16,000 before the grant, 0% VAT on homes
- Phone
- 07833 053749
- Reviewed
- 30 October 2026
What else we do in Singleton
Homes in Singleton and heat pumps
About 71% of households live in detached or semi-detached houses, according to the last census (2021). Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
West Dean House lies about 1.2 miles west. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions.
Singleton is about 5 miles north of Chichester, in West Sussex. For air source heat pumps in and around Singleton, it’s easy to get a fixed-price quote: please ring 07833 053749 or drop us a line. We work across London and the South East, including Singleton. 371 places in West Sussex are on our list. There’s also a page for Worthing, roughly 16 miles from Singleton.
Not far from Singleton, a recent job of ours was on East Street, Chichester (PO19), about 5 miles south: installing a Daikin wall-mounted unit in the dining area and a second unit serving the kitchen pass area.
Local streets include Downley Close, The Leys and Charlton Road, and we cover them all. Work in PO18 follows the same survey, fixed-price quote and written records as everywhere else we cover. If you are just outside Singleton, we cover Charlton (1 mile east), West Dean (1 mile west), East Dean (2 miles east), Cocking (3 miles north) and Heyshott (3 miles north-east). Further out, we also cover Bognor Regis (9 miles south), Chichester (5 miles south), Selsey (12 miles south) and Littlehampton (12 miles south-east).
What’s near Singleton
Typical jobs here are in properties near The Partridge Inn, among other places. Other landmarks nearby include Weald and Downland Gridshell (under half a mile south-west) and Chichester Centre (4.5 miles south). For a walk, there’s Levin Down and Kingley Vale National Nature Reserve.
How it works
There’s very little for you to do on the day. Just let us in and point us to the units, or to where they’ll be fitted, and we take it from there. At the end, we tidy up and run through the work with you. We plan the trip to Singleton around you.
- It begins with your house and the heating it relies on now.
- We measure heat loss for every room.
- The design covers the heat pump, emitters, hot water and outdoor unit.
- Cost, grant and VAT appear on one fixed-price quote.
- Then it’s fitted, commissioned and registered with MCS.
How to prepare
- Clear a path to the units and the space around them
- Keep pets out of the rooms we are working in
- Let us know where the consumer unit is
Getting a quote
For a fixed-price quote, ring 07833 053749 or email us with the address and a few details about the rooms or units involved. A few photos make it quicker. You’ll hear back from us the same working day.
Read more
System by system
Air-to-air heat pumps
Air-to-air heat pumps warm rooms through indoor units and can cool them in summer. Hot water needs a separate source so you’ll need another way to heat it.
VAT on heat pumps
Please treat this as general guidance rather than tax advice.
FAQs for Singleton
Is planning permission needed for a heat pump in Singleton?
There’s no single answer: the building and the outdoor unit position decide it. There’s a conservation area, the Singleton Conservation Area, close to central Singleton. The permitted development rules for heat pumps leave out listed buildings and stop outdoor units going on road-facing walls or roofs in conservation areas. Anything outside the rules needs an application, and we raise it with the local planning authority (for Singleton, usually Chichester council) first.
Is Singleton within the area you cover?
We do. Villages and hamlets get the same service as the bigger towns. Send a few details and photos, and we reply the same working day.
Can you set up regular servicing?
Yes. Tell us what you have and how it’s used, and we’ll suggest a schedule with a fixed price. That can include the leak checks the F-gas rules require for larger systems.
Do you work for landlords and businesses?
Yes. From a single let flat to offices, shops and public buildings, we work the same way: a look first, a fixed-price quote and written records.
Should I choose air-to-water or air-to-air?
Air-to-water heats radiators or underfloor heating and hot water; air-to-air heats rooms through indoor units and can cool them. With air-to-air, hot water needs another source, and we explain which suits your home.
Do you provide F-Gas records?
Yes. It’s your proof of what was done: the date, the work, and any refrigerant added or recovered.
Do you offer emergency call-outs?
Yes. Our emergency line runs 24/7 for breakdowns that cannot wait. Ring 07833 053749 any time and explain the problem.
Landlords, agents and facilities managers
The F-gas rules share responsibility for leak checking between the equipment’s operator and the service technicians. Where a building is let or managed, the lease or contract should make clear who looks after the system, and we can work for either side.
From a single flat to a whole estate, the approach is the same: diagnosis, a fixed price, access agreed with the people on site and paperwork at the end.
From one of our customers
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager