Essex · Heat pump installation
Heat pump installation in Shalford, Essex
Air source heat pumps in Shalford from an F-Gas certified company, with warranty terms explained brand by brand. Enquiries answered the same working day.
- Finding a place for the outdoor unit
- Checking emitters for a heat pump
- Working out where a cylinder could go
Air source heat pumps in Shalford
Hot water from an air-to-water system is stored in a cylinder. Homes with a combi boiler may not have a cylinder, so finding space for one is part of the survey. With air-to-air, hot water has to come from something else. If the problem is questions about where the outdoor unit can go and moving away from fossil-fuel heating, we can help.
Older and listed homes in villages like Shalford need extra care, because permitted development does not apply within the grounds of a listed building, so consent comes first.
Whatever the visit, you get a written record: commissioning details and F-Gas records for a new system, a note of the fault and the fix for a repair, or a service record. File it with the manual, because it helps with any later warranty question.
- Location
- Shalford (CM7)
- Region
- Essex
- Price
- Fixed after a survey or photos
- Credentials
- F-Gas certified company, NICEIC approved, MCS
- Guide price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Phone
- 07833 053749
- Last updated
- 30 October 2026
How the visit works
Testing is the last part of the visit wherever the system can be switched on. Then we show you what we’ve done and answer any questions, and anything that needs attention later is pointed out. The visit takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. We agree a date with you and plan the visit to Shalford so we arrive with what’s needed.
- First, a chat about the property and your goals for the heating.
- A survey covers heat loss, radiators, hot water and where the outdoor unit could sit.
- We recommend air-to-water or air-to-air and check the grant position.
- Installation follows on the agreed dates.
- We commission it, complete the MCS certificate and show you how to use it.
Preparing for the visit
- Tell us about access, such as roof hatches, high walls or locked plant areas
- Move furniture away from the wall where we’ll be working
- Name a contact who can meet us at the agreed time
Getting a quote
Quotes do not take long. Send a few details and pictures, and we reply the same working day. Where a survey is needed, we arrange a time that suits you.
Related advice
Air source heat pumps around Shalford
On the National Heritage List, around 21 entries fall within 0.5 miles of the middle of Shalford; Parish Church of St Andrew (grade I) is one. That affects heat pumps: listed buildings need consent, and conservation areas limit where the outdoor unit can go under permitted development. Where needed, we check with Braintree council, usually the planning authority here. The last census (2021) found about 88% of households in detached or semi-detached houses. Houses usually have space for an outdoor unit and a hot water cylinder.
Period properties close to Parish Church of St Andrew can suit a heat pump, though insulation and any heritage protection are checked first. Every heat pump design starts with a room-by-room heat loss calculation.
Shalford is about 5 miles north-west of Braintree, in Essex. Whatever kind of property you have in Shalford, we can help with air source heat pumps. We reply to enquiries the same working day, and there’s a 24/7 emergency line. Our Essex coverage runs to 644 places, Shalford among them. London, roughly 40 miles off, has its own page on this site.
Whether you are on The Street, Wethersfield Road and Braintree Road or anywhere close by, our engineers can take on the work. All of CM7 is covered, from the main roads to the quietest streets. If you are just outside Shalford, we cover Sand Hill (1 mile north), Church End (1 mile south), Beazley End (1 mile south-east), Almshouse Green (3 miles north-east) and Bocking Churchstreet (3 miles south-east). We also work in nearby towns such as Chelmsford (14 miles south), Braintree (5 miles south-east), Witham (11 miles south-east) and Saffron Walden (12 miles north-west).
Near you in Shalford
Locally, jobs take us to houses, flats and workplaces close to The George Public House. For rail, the closest station is Braintree station, roughly 4.9 miles south-east. Well-known places in the area include Braintree Community Hospital (4.2 miles south).
Why act early in Shalford
If the emitters can’t give out enough heat, some rooms will not get warm enough. The survey picks this up before installation. Small faults tend to grow, so it’s worth dealing with them early.
Every job is different, so we price each one individually. The system, the access, the pipe routes and the parts involved all play a part.
What you get with us
- Warranty terms set out brand by brand
- MCS certified heat pump installers
- A 24/7 emergency line
- NICEIC approved for electrical work
See our cost guide or our accreditations.
FAQs for Shalford
Can I get the Boiler Upgrade Scheme grant in Shalford?
Yes, the scheme covers homes in England, including Shalford, if they qualify. The amount depends on the type of heat pump, and the survey confirms which applies. As an MCS certified installer, we apply for it on your behalf.
Is Shalford within the area you cover?
Yes, smaller places are covered as well as towns. Visits to smaller places are planned so the engineer arrives with what the job needs.
Can we book visits on a schedule?
Yes. We offer maintenance contracts, set at the interval the system and the manufacturer’s terms need. Each visit is recorded, with F-Gas records where refrigerant work is involved.
How much time does a heat pump install need?
It takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. How much of the heating changes decides most of the time and the timing is set out with your quote.
How much does an air source heat pump cost?
An air-to-water heat pump costs £8,000–£16,000 (0% VAT on homes) before the grant. The Boiler Upgrade Scheme offers £7,500 to eligible homes in England and Wales, and we confirm eligibility before you commit.
Is there a survey before the work?
Yes, every time. We diagnose before we treat: the survey tells us what the job needs and how to do it and the fixed price is built on it.
Do I need to service the system to keep the warranty?
It can, for some brands. Send us the make and model and we will tell you what the manufacturer expects, and book the service at the interval they recommend.
System by system
Radiators and underfloor heating
Heat pumps run at lower flow temperatures, so radiators may need to be larger, and the survey checks each one.
Hot water cylinders
Existing cylinders may not be suitable for a heat pump and we tell you if it needs replacing.
After we have gone
To keep the system working properly:
- Look at insulation alongside the heat pump
- Leave space around the outdoor unit
- Check eligibility for the Boiler Upgrade Scheme early
If anything does not seem right after installation, phone 07833 053749 or write to us at info@aircondoctor.co.uk and we will look into it. A yearly service is a good habit.
Keep insulation and draught-proofing in good order because it reduces the heat the system needs to supply.
Nearby places to Shalford
What else we do in Shalford
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager