Kent · Heat pump installation
Heat pump installation in Rushenden, Kent
F-Gas certified and NICEIC approved, we cover Rushenden for heat pump installation. A fixed price before we start, and a 24/7 emergency line.
- Questions about the Boiler Upgrade Scheme
- Working out whether radiators need upsizing
- Ageing boilers that will need replacing
Air source heat pumps in Rushenden, done properly
A £2,500 grant is available for some air-to-air heat pumps, with conditions. It has to replace the fossil-fuel heating, cover the whole heating demand, be fitted by an MCS certified installer and be in a home, so an add-on next to a boiler is not eligible. The work covers air-to-air heat pumps, homes heated by oil, LPG or gas and hot water cylinders, and the jobs we see most are questions about listed buildings or conservation areas and replacing a combi boiler with a heat pump.
For a home around Rushenden that’s off mains gas and heated by oil or LPG, the Boiler Upgrade Scheme adds an extra £1,500 until March 2027 for an air source or ground source heat pump, on top of the £7,500.
Whatever the visit, you get a written record: commissioning details for an installation, a fault and repair note for a repair, or a record of the service. File it with the manual so it’s to hand next time.
- Place
- Rushenden (ME11)
- Region
- Kent
- Quote
- Fixed, in writing
- Credentials
- NICEIC approved, F-Gas certified, MCS
- Guide price
- £8,000–£16,000 (0% VAT on homes), before the grant
- Enquiries
- Same working day
- Phone
- 07833 053749
- Page updated
- 30 October 2026
What affects the cost of air source heat pumps
Before we fix a price, we need to know a few things. We look at:
- One-off work versus a regular service cycle
- What electrical work the job needs
- What kind of system it is
What you pay reflects the actual work. That is why we look at the job first, from pictures or on a survey, and why the quote is fixed before we start.
Helping us quote
When you call or email, these details help:
- Your consumer unit or fuse board
- The rating plate or label on any existing unit
- The paperwork from the last service, if you have it
Getting a quote is straightforward. Send a few details and pictures, and we reply the same working day. Where a survey is needed, we arrange a time that suits you.
The process
You do not need to do much on the day. Just let us in and point us to the units, or to where they’ll be fitted, and we take it from there. Before we leave, the area is tidied and we explain what we have done. Rural lanes and tight entrances are worth mentioning before a visit to Rushenden.
- You tell us about the home and what you want from a heat pump.
- The survey checks heat loss, emitters, hot water and the outdoor unit position.
- You get our view on the right type for the house, and on whether the Boiler Upgrade Scheme applies.
- We install the heat pump and connect it up.
- After commissioning, you get the MCS certificate and a handover.
Getting ready for the visit
- Let us know if the building has a permit or sign-in process
- Have the make and model of any existing unit to hand
- Clear a path to the units and the space around them
Ask for a quote
Some jobs can be priced from photos, while others need a survey. Multi-room systems, commercial buildings and anything with a long or hidden pipe route are normally surveyed first. Either way, you get a fixed price before any work is booked.
Advice
Heat pumps in Rushenden: local notes
At about 1 mile from the coast, Rushenden is close enough for sea air to matter. Near the coast, we choose the outdoor unit position with salt-laden wind in mind. Historic England lists about 7 buildings and structures within half a mile of the centre of Rushenden, including Parish Church of the Holy Trinity (grade II*). So the heat pump survey asks two extra questions here: is the home listed, and is it inside a conservation area? About 63% of households live in detached or semi-detached houses, according to the last census (2021). Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
Older homes near Parish Church of the Holy Trinity may need extra checks for planning and heat loss before a heat pump is designed.
Rushenden is about 2 miles south-west of Sheerness, in Kent. Homes and businesses alike in Rushenden, our engineers can help with air source heat pumps. You will hear back from us the same working day and our emergency line runs 24/7. Our list for Kent has 922 entries and Rushenden is among them. We also work in Bromley, around 31 miles away.
We cover homes and businesses on Well Road, Manor Road and First Avenue and the roads around them. Postcode districts we cover here: ME11. We also cover Queenborough (1 mile north-east), Halfway Houses (2 miles north-east), Sheerness (2 miles north-east), Blue Town (2 miles north) and Grain (3 miles north). Further out, we also cover Maidstone (14 miles south-west), Sittingbourne (5 miles south), Whitstable (13 miles east) and Faversham (9 miles south-east).
What’s near Rushenden
Typical jobs here are in properties near Oasis Academy Isle of Sheppey and Old House at Home, among other places. The nearest railway station is Queenborough station, about 0.6 miles north-east. Other landmarks nearby include Queenborough Guildhall Museum (0.5 miles north) and Castle Rough (3.5 miles south).
Also near Rushenden
What else we do in Rushenden
Signs you need air source heat pumps in Rushenden
An ageing boiler is often the moment people start thinking about a heat pump. Planning the change before the boiler fails gives you time to survey, design and apply for any grant, rather than rushing a replacement in winter.
Any of these is worth a proper look:
- Working out whether radiators need upsizing
- Questions about listed buildings or conservation areas
- An oil, LPG or gas boiler near the end of its life
Homeowners near Queenborough station often ask whether a heat pump can take over from the boiler, and the heat loss survey answers that.
Questions to ask before you book
- Why the equipment they’re quoting suits the job
- If the quote is based on a survey, photos or a diagnosis
- Proof of F-Gas company certification
Why it’s worth doing now in Rushenden
The two types suit different homes and needs. Air-to-water heats radiators and hot water, and can attract a £7,500 grant where eligible; air-to-air heats and cools rooms, and only qualifies for £2,500 under strict conditions, and we explain which fits your home. For a village like Rushenden, booking ahead lets us plan the trip properly.
One room or a whole building, the quote is built the same way: the work involved, the access and the equipment. You will have a fixed price before any work starts, and the quote sets out the VAT.
Why people in Rushenden choose us
- A 24/7 emergency line
- Leading brands including Daikin, Mitsubishi Electric and Fujitsu
- Every job looked at before it’s priced
- A fixed price before any work starts
Read our cost guide or our accreditations.
FAQs for Rushenden
Can I get the Boiler Upgrade Scheme grant in Rushenden?
Rushenden is in England, where the Boiler Upgrade Scheme runs. The grant is £7,500 for an air source (air-to-water) heat pump and £2,500 for an air-to-air system that replaces the existing fossil-fuel heating. As an MCS certified installer, we apply for it on your behalf.
Will you come out to Rushenden?
Yes. Rushenden is within the area we cover across London and the South East. We’re based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Will my radiators work with a heat pump?
We find out during the survey. Rooms where the radiator is big enough stay as they are and any changes are in the quote.
Whose job is it to check the system for leaks?
Responsibility is shared between the operator, typically whoever owns or controls the equipment, and the service technicians. The interval depends on the refrigerant charge, measured in tonnes of CO2 equivalent: at least yearly for 5 to under 50 tCO2e, and every 6 months for 50 to under 500 tCO2e.
What accreditations do you have?
F-Gas company certification, NICEIC approval for electrical work and MCS certification for heat pumps, and we are Checkatrade members. Engineers who handle refrigerant hold their own F-gas qualifications as well.
How much does an air source heat pump cost?
Air-to-water work is in the £8,000–£16,000 range (0% VAT on homes), with any grant still to come off. The heat pump size, radiator changes and the cylinder decide where in that range you are. Air-to-air is priced after a survey.
When will I hear back?
The same working day. After that, we agree a survey, diagnosis or installation date that suits you, and you get a fixed price before any work goes ahead.
From one of our customers
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath