West Sussex · Heat pump installation
Heat pump installation in Pyecombe, West Sussex
Expert air source heat pumps for Pyecombe: a survey or diagnosis, a fixed price, careful work and proper paperwork. Call for a fixed-price quote.
- Ageing boilers that will need replacing
- Choosing between air-to-water and air-to-air
- Moving away from fossil-fuel heating
Air source heat pumps in Pyecombe
Many air source heat pumps can be installed as permitted development in England, without a planning application. Conditions include a maximum outdoor unit size of 1.5 m³, compliance with MCS 020(a), use for more than cooling alone and a site outside the curtilage of a listed building. We look at the planning position for your home during the survey. The work covers homes heated by oil, LPG or gas, hot water cylinders and underfloor heating, and common reasons people get in touch are planning and permitted development questions and questions about where the outdoor unit can go.
Homes around Pyecombe usually have room outside for a heat pump, so the design focuses on heat loss and radiators.
We are an F-Gas certified company, NICEIC approved for electrical work, with MCS certification for heat pumps and Checkatrade membership. Our engineers hold the F-gas qualifications needed to work on refrigerant.
- Place
- Pyecombe (BN45)
- Region
- West Sussex
- Price
- A fixed-price quote up front
- Certified
- F-Gas certified company, NICEIC approved, MCS
- Costs
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Telephone
- 07833 053749
- Reviewed
- 30 October 2026
How it works
Our engineers arrive at the time agreed with you and run through the plan before anything else. Floors and furniture near the work are covered with dust sheets, and anything electrical is made safe before work starts. The work itself takes a few days for most air-to-water installations, with air-to-air systems often quicker. Photos of the existing unit help with repairs and servicing in Pyecombe.
- We talk through your home, your current heating and what you want from a heat pump.
- We survey the home room by room for heat loss, and check the emitters, hot water and outdoor unit position.
- You get a fixed-price quote, with any grant you are eligible for and the VAT explained.
- We fit the outdoor unit and connect it to the heating, hot water and controls.
- We commission the heat pump, complete the MCS paperwork and talk you through the controls.
Before we arrive
- Clear the space around the indoor unit, or where it will go
- Let us know if the units are on a roof, a high wall or in a locked area
- Mention any parking restrictions near the property
Getting a quote
The quickest way to a quote is to send pictures: the room or the existing unit, the outside wall or roof where the outdoor unit sits or would go, and the label on any existing unit. Tell us the address and what you need, and many jobs can be priced from that.
Related advice
Also near Pyecombe
Also in Pyecombe
Air source heat pumps in Pyecombe: the local picture
Valuation Office Agency council tax records date about 42% of homes across Pyecombe and its surrounding area to the post-war years, 1945 to 1972, and Census 2021 figures found about 77% of households in detached or semi-detached houses. Whether the walls and loft have been insulated makes a real difference to the heat pump size for homes of that period. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
With Preston Manor & Gardens about 4 miles south, it’s worth asking whether your own home is listed before planning a heat pump. Period properties close to Church of the Transfiguration can suit a heat pump, though insulation and any heritage protection are checked first.
Pyecombe is about 4 miles south of Burgess Hill, in West Sussex. Whatever kind of property you have in Pyecombe, our engineers can help with air source heat pumps. We reply to enquiries the same working day, and there’s a 24/7 emergency line. We cover 371 places across West Sussex, large and small.
The closest recent job we can point to from Pyecombe was on Keymer Road, Hassocks (BN6), about 2 miles north: installing a Mitsubishi Electric multi-split system serving three bedrooms and a dedicated home office.
From London Road, School Lane and Church Hill to the smaller roads in between, nowhere is left out. Here we cover the BN45 postcode area. If you’re just outside Pyecombe, we cover Saddlescombe (1 mile south-west), Waterhall (2 miles south), Patcham (3 miles south), Westdene (3 miles south) and Hollingbury (3 miles south-east). Larger places within reach include Crawley (15 miles north), Horsham (13 miles north-west), Worthing (12 miles south-west) and Haywards Heath (7 miles north-east).
Around Pyecombe
The closest station to Pyecombe is Hassocks station, roughly 1.9 miles north-east. Well-known places in the area include Clayton Castle (1 mile north-east) and The Budding Foundation Museum of Gardening (1.7 miles north). Green spaces nearby include Wolstonbury Hill and Ladies Mile.
Safe owner checks
Before you call us about a fault, a few checks can save a visit: is the system in the right mode, is the set temperature sensible, are the remote’s batteries working and has the breaker tripped. If a breaker trips again after you reset it, leave it off and call 07833 053749.
Write down what you notice: error codes, noises, drips, smells or a drop in performance. It makes our diagnosis quicker, and a photo or a short video of the display is even better.
Honest limits
Not every problem is solved by air source heat pumps, and we’d rather say so up front. It won’t put right:
- Tax advice on your own circumstances
- Draught-proofing and insulation upgrades
- Planning decisions, which rest with the council
If you’re not sure, just ring us on 07833 053749 or send an email and we’ll give you a straight answer before booking.
Parts of the system we cover
- Radiator systems
- Hot water cylinders
- Air-to-water heat pumps
- Homes heated by oil, LPG or gas
- Air-to-air heat pumps
- Underfloor heating
Questions from Pyecombe
Do you cover smaller places like Pyecombe?
We do. Villages and hamlets get the same service as the bigger towns. We are based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Is planning permission needed for a heat pump in Pyecombe?
The answer turns on the property and where the outdoor unit would sit. Central Pyecombe is a short walk from the Pyecombe Conservation Area. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with the planning department at Mid Sussex council, usually the authority for Pyecombe.
Do you work on all makes?
We install and work on the leading makes, from Mitsubishi Electric, Daikin and Fujitsu to Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. Send us the make and model if you have it.
Will my home qualify for the Boiler Upgrade Scheme?
We confirm eligibility at the survey stage. There’s one grant per property, you cannot get one to replace a low-carbon system, and hybrids are excluded and other conditions apply.
Can I fit air conditioning or a heat pump myself?
No, not the refrigerant side. The F-gas rules require certified companies and qualified engineers for it, and a new electrical circuit is notifiable building work unless a registered competent person does it.
Can you set up regular servicing?
Yes. Maintenance contracts are part of what we do, set at the interval the system and the manufacturer’s terms need. Each visit is written up and F-Gas records kept where they apply.
Will skipping a service affect the warranty?
Each manufacturer decides. If servicing is in the terms, missing one could affect a claim, so we explain the terms on your quote.
What affects the quote in Pyecombe
The diagnosis comes before the price. We look at:
- One-off work versus a regular service cycle
- Whether it’s a simple split or a larger system
- Which make and model is being fitted or worked on
Whatever the property, the quote works the same way: the equipment, the access, the work involved and the time it takes. Ask for a fixed-price quote and we’ll go through it with you.
Asking for a quote
Photos and a few facts are often enough to price a simple job. Send what you can of the following:
- The make and model of the system, from the label
- Wide pictures of the room or the existing unit
- The address and the type of property
If you need air source heat pumps in Pyecombe, ring 07833 053749, or email if that’s easier. Tell us what kind of property it is and what you’d like done, and send a few photos if you can. We reply the same working day.
A customer’s words
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath