Milton Keynes · Heat pump installation
Heat pump installation in Oakgrove, Milton Keynes
MCS certified installation of air source heat pumps for heating and hot water, with the boiler upgrade scheme grant applied for, in Oakgrove and nearby. Call for a fixed-price quote; we reply the same working day.
- Finding a place for the outdoor unit
- Checking whether planning permission is needed
- A boiler that’s getting old
Air source heat pumps in Oakgrove: the local picture
About 63% of homes in the Oakgrove area have been built since 2000, according to the Valuation Office Agency’s council tax figures. Better insulated, newer homes are often a good match for a heat pump.
Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler.
Oakgrove is about 2 miles east of Milton Keynes, in Milton Keynes. Anywhere in MK10, we can help with air source heat pumps. 73 places in Milton Keynes are on our list, large and small. London, roughly 46 miles off, has its own page on this site.
Our engineers work on Mill Lane, Capek Road and Altair Road and nearby roads. Every address in MK10, MK15 and MK6 is within our area. We also cover the places around Oakgrove: Woolstone (1 mile north-west), Middleton (1 mile east), Woughton on the Green (1 mile south), Walton Hall (1 mile south-east) and Simpson (2 miles south). We also work in nearby towns such as Bletchley (3 miles south), Newport Pagnell (3 miles north), Bletchley and Fenny Stratford (3 miles south) and Furzton (3 miles south-west).
What’s near Oakgrove
In Oakgrove, that means homes and buildings near Milton Keynes Academy, Gyosei International School UK and The Barge Inn, among other places. The closest station to Oakgrove is Milton Keynes Central station, about 2.4 miles west of the centre. A little further out are National Film and Sci-Fi Museum (1.6 miles west) and Central Milton Keynes Shopping Centre (1.5 miles west). For a walk, there’s Blue Lagoon Park and Willen Lake.
Air source heat pumps for homes and businesses in Oakgrove
Installing an air source heat pump in a home is zero-rated for VAT until 31 March 2027, then 5%. That follows HMRC Notice 708/6, and it doesn’t apply to businesses, and for air-to-air systems we confirm the VAT on your quote. Please treat this as general information rather than tax advice. The work covers air-to-air heat pumps, underfloor heating and hot water cylinders, and the jobs we see most are a boiler that’s getting old and radiators that may be too small for a heat pump.
If your home near Oakgrove has no mains gas, the grant can be bigger. Until March 2027, homes on oil or LPG without mains gas can get an extra £1,500 through the Boiler Upgrade Scheme, for an air source or ground source heat pump.
Any work on the refrigerant circuit is recorded: what was done, the refrigerant type and any amount added or recovered. File them with the system’s paperwork, as a manufacturer or a future engineer may ask to see them.
- Where
- Oakgrove (MK10, MK15, MK6)
- Region
- Milton Keynes
- Prices
- £8,000–£16,000 (0% VAT on homes), before the grant
- Price
- Fixed, in writing
- Accreditations
- F-Gas certified company, NICEIC approved, MCS
- Response
- On the working day you ask
- Telephone
- 07833 053749
- Page updated
- 30 October 2026
Signs you need air source heat pumps in Oakgrove
For homes with no mains gas, heated by oil or LPG, a heat pump is well worth considering. The Boiler Upgrade Scheme includes an extra £1,500, until March 2027, for air source or ground source heat pumps in homes heated by oil or LPG with no mains gas where the home is eligible.
Reasons to give us a call include:
- Working out whether radiators need upsizing
- Planning and permitted development questions
- Comparing heat pump types
Historic houses such as Linford Manor, about 2.7 miles north-west, are a reminder that listed homes need consent before a heat pump goes in.
What to look for in a quote
- The make and model of any parts or equipment being quoted
- Whether they hold F-Gas company certification, not just individual qualifications
- Whether testing, commissioning and paperwork are included
Places near Oakgrove
What else we do in Oakgrove
What we do, step by step
Each visit follows the same order: check the plan with you, put the dust sheets down, do the work, test what we’ve done and explain it all to you. On site, the work takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. A few pictures let us plan a visit to a place like Oakgrove.
- First we find out about the property, the heating you have now and what you are hoping for.
- We survey the home room by room for heat loss, and check the emitters, hot water and outdoor unit position.
- A fixed-price quote follows, setting out the system, any grant that applies and the VAT.
- We fit the outdoor unit and connect it to the heating, hot water and controls.
- Once it’s running correctly, the MCS certificate is issued and we show you the settings.
Getting ready for the visit
- Clear the space around the indoor unit, or where it will go
- Let us know where the consumer unit is
- Mention any roof access, ladders or high-level work
How to get a quote
Want a quote for air source heat pumps? Please ring us on 07833 053749 with a few details about the property. We’ll talk you through the options and give you a fixed-price quote before you commit to anything.
Read more
Oakgrove questions
Is Oakgrove within the area you cover?
Yes, smaller places are covered as well as towns. We are based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Can I fit a heat pump in Oakgrove without planning permission?
The answer turns on the property and where the outdoor unit would sit. Around 10 listed entries sit within 0.5 miles of central Oakgrove. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights don’t reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask Milton Keynes council, which is normally the planning authority for Oakgrove.
Is the equipment covered by a warranty?
Warranty is the manufacturer’s own, on its terms. Terms differ by brand, and we set them out on your quote.
Why use an F-Gas certified company?
The law says any company working on equipment containing F gas has to be certified, and the engineers need their own qualifications. It’s how you know the refrigerant is being handled legally and safely.
Do I need to service the system to keep the warranty?
That depends on the brand. Where servicing is a condition, a missed service could give the manufacturer grounds to refuse a claim and we’ll tell you what your brand asks for.
What VAT do I pay on a heat pump?
Not on a home installation at the moment: HMRC zero-rates heat pumps installed in residential accommodation until 31 March 2027, and 5% applies after that. Businesses and hotels pay the standard rate, and for air-to-air systems we confirm the VAT on your quote. This is general information, not tax advice.
Can you look at a system you didn’t fit?
Yes. We start with a proper look and tell you honestly what we find, including anything about the original installation that needs putting right. Any work is priced before it goes ahead.
When something else is needed
We will not sell you work that doesn’t address the problem, so here are the limits:
- A grant for a home that does not meet the scheme rules
- Insulation work, such as loft or cavity wall insulation
- Planning decisions, which rest with the council
If you’re not sure, just phone us on 07833 053749, or email if that’s easier and we’ll give you a straight answer before you book.
What we work on in Oakgrove
- Hot water cylinders
- Air-to-water heat pumps
- Air-to-air heat pumps
- Homes heated by oil, LPG or gas
- Radiator systems
- Underfloor heating
Pricing air source heat pumps in Oakgrove
The quote reflects the job in front of us. We consider:
- Which make and model is being fitted or worked on
- A single visit or a regular plan
- The number of rooms, units or zones
Every job is different, so each one gets its own fixed-price quote. The system, the access, the pipe routes and the parts involved all make a difference.
What to send for a quote
A few details help us quote accurately. With your enquiry, please include:
- Any error code or flashing light on the display
- Your consumer unit or fuse board
- Where the outdoor unit is, or where you’d like it
Getting a quote is straightforward. Call or email with a few details and we’ll come back to you the same working day. If we need to see the property first, we book a survey at a time that works for you.
What a customer said
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath