Essex · Heat pump installation
Heat pump installation in North End, Essex
Air source heat pumps for North End, from F-Gas certified engineers, with the manufacturer’s warranty terms explained on your quote. We reply to enquiries the same working day.
- Replacing a combi boiler with a heat pump
- Choosing between air-to-water and air-to-air
- An oil, LPG or gas boiler near the end of its life
Air source heat pumps for homes and businesses in North End
A £2,500 grant is available for some air-to-air heat pumps, with conditions. It has to replace the fossil-fuel heating, cover the whole heating demand, be fitted by an MCS certified installer and be in a home, so an add-on next to a boiler is not eligible. Common call-outs are for checking emitters for a heat pump and not knowing whether a grant applies, on air-to-air heat pumps, homes heated by oil, LPG or gas and hot water cylinders.
Space for an outdoor unit is rarely an issue near North End, so the design focuses on heat loss and radiators.
Any work on the refrigerant circuit is recorded: what was done, the refrigerant type and any amount added or recovered. File them with the system’s paperwork, as a manufacturer or a future engineer may ask to see them.
- Where
- North End (CM6)
- Region
- Essex
- Certified
- NICEIC and F-Gas, MCS
- Guide price
- £8,000–£16,000 (0% VAT on homes), before the grant
- Price
- Fixed-price quote after a site survey
- Phone
- 07833 053749
- Reviewed
- 30 October 2026
How the visit works
Think of the visit in three stages: diagnose, treat and sign off. First we check the system or the space against the plan, then we do the work, and finally everything is tested, recorded and explained. The middle part takes longest, and that takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. A few pictures help us make the most of a visit to North End.
- It begins with your house and the heating it relies on now.
- A heat loss survey is carried out, room by room.
- The design covers the heat pump, emitters, hot water and outdoor unit.
- You get a fixed price, with any grant and the VAT set out.
- Then it’s fitted, commissioned and registered with MCS.
How to prepare
- Make sure someone can let us in at the agreed time
- Keep pets out of the rooms we’re working in
- Make sure we can reach the outdoor unit, or where it will go
Getting a quote
Our prices page gives typical ranges, but your quote is based on your job, because no two buildings, rooms or systems are the same. Once we’ve looked at the job, from photos or on a survey, you get a fixed price. To start, call 07833 053749 or send an email.
Advice
Keeping the system healthy
Systems last better with the right care. We suggest:
- Leave space around the outdoor unit
- File the MCS certificate safely
- Know the servicing conditions in your warranty
If you were eligible for a grant, we handle the application and keep you updated since the grant goes through the installer.
Do not cover radiators with furniture or heavy curtains, as the system relies on them giving out heat.
Air source heat pumps in North End: the local picture
VOA council tax data show about 31% of homes in and around North End were built in 2000 or later, and the last census (2021) found about 83% of households in detached or semi-detached houses. Lower heat loss in recent homes often means a smaller heat pump and fewer radiator changes. Detached and semi-detached houses usually have room for the outdoor unit and a cylinder.
Every heat pump design starts with a room-by-room heat loss calculation. If your home is one of the older properties near Church of St Andrew, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen.
North End is about 7 miles south-west of Braintree, in Essex. Properties in North End get the same service as everywhere we cover: a look at the job first, a fixed-price quote and written records at the end. Our area takes in 644 places across Essex, from busy centres to quieter spots. London, roughly 32 miles off, has its own page on this site.
Our working area takes in CM6. From Bennett's Lane, Mill Road and Black Chapel Lane to the smaller roads in between, nowhere is left out. If you are just outside North End, we cover Causeway End (1 mile north-east), Little Dunmow (1 mile north), Ford End (1 mile south-east), Felsted (1 mile north-east) and Brookstreet (1 mile north). Further out, we also cover Chelmsford (8 miles south-east), Braintree (7 miles north-east), Harlow (14 miles west) and Maldon (14 miles south-east).
Around North End
Around North End, our work takes us to homes and businesses near The Butchers Arms Public House, among other places. Other landmarks nearby include Little Easton Moat (4.7 miles north-west) and Broomfield Hospital (5.2 miles south-east). Open spaces near North End include Phyllis Currie Nature Reserve.
Why it’s worth doing now in North End
A sudden boiler failure rarely leaves room to plan a heat pump properly. Planning ahead gives time for the heat loss survey, the design and the grant application before you need the heat. Getting the date in early helps for a place like North End.
Homes, offices, shops and public buildings are all priced the same way: what’s needed, how we reach it, the parts and the labour. Call for a fixed-price quote and we’ll explain each part.
What you get with us
- A 24/7 emergency line
- F-Gas certified company
- A site survey and a fixed-price quote
- Listed on Checkatrade
Places near North End
Also in North End
Questions from North End
Will you come out to North End?
Yes, smaller places are covered as well as towns. A few pictures and the postcode are enough to get things started.
Is a heat pump in North End permitted development?
It comes down to the building and the spot chosen for the outdoor unit. Around 24 listed entries sit within 0.5 miles of central North End. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit can’t face a road. Where needed, we check with the local planning authority (for North End, normally Chelmsford council).
Why does F-Gas certification matter?
Companies working on equipment that contains F gas must be certified by an approved body, and each engineer needs the right qualifications too. It’s how you know the refrigerant is being handled legally and safely.
Will you work on another installer’s system?
Yes. We work on systems fitted by other installers as well as our own, on all the main brands. Tell us the make and model and send any paperwork you have.
Will you make a mess?
Protection goes down first: dust sheets over floors and anything close to the work. Holes and fixings are agreed with you, and we clean up afterwards before we leave.
Which manufacturers do you install and repair?
We work with the leading brands, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. Tell us the make and model and we will take it from there.
How long does a heat pump installation take?
Expect it to take several days for an air-to-water system with a new cylinder, less for an air-to-air system. The cylinder, the radiators and the pipework make the biggest difference and the timing is set out with your quote.
Fixed-price quotes for air source heat pumps in North End
The survey or diagnosis tells us what the work involves. The main factors are:
- The type of system, from a single split to a larger system
- A single visit or a regular plan
- The distance and route between the indoor and outdoor units
No two properties are the same, so we price each one individually. The equipment, how we reach it, the route between units and the work needed all make a difference.
What to send for a quote
What to send for a quote:
- The remote or wall controller showing any error
- Your consumer unit or fuse board
- The outdoor side of the property, including any roof or flat area
Every quote starts with a look at the job, from a site survey or, where the job is straightforward, from photos and measurements. Then you get a fixed price so you know the cost before we begin.
A customer’s words
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead