Buckinghamshire · Heat pump installation
Heat pump installation in Kingsash, Buckinghamshire
We cover Kingsash for air source heat pumps. Diagnosis first, a fixed price and proper paperwork when we finish.
- Finding a place for the outdoor unit
- Not knowing whether a grant applies
- A boiler that’s getting old
FAQs for Kingsash
Do you cover Kingsash for air source heat pumps?
Yes. We work across London and the South East from our base in East Grinstead, and Kingsash is part of that. To start, ring 07833 053749 or email us with a few pictures.
Do you cover smaller places like Kingsash?
Yes, smaller places are covered as well as towns. We’re based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Will you work on another installer’s system?
Yes. Systems fitted by other companies are fine, on all the main brands. Send us the make and model, and any records you have.
Should I choose air-to-water or air-to-air?
Air-to-water heats radiators or underfloor heating and hot water; air-to-air heats rooms through indoor units and can cool them. Air-to-air doesn’t heat hot water and the survey helps decide.
When will I hear back?
We reply to enquiries the same working day. For a breakdown that cannot wait, call our 24/7 emergency line.
Whose job is it to check the system for leaks?
Whoever operates the equipment, together with the technicians who service it. Larger systems need regular checks: at least every 12 months from 5 tCO2e and every 6 months from 50 tCO2e. We’ll work out which band applies to yours.
Do I need planning permission for a heat pump?
That depends on your home and the unit’s position. Flats have different limits, conservation areas have extra conditions, and an Article 4 direction can remove the rights, so we check during the survey.
How we handle air source heat pumps in Kingsash
Every installation starts with a heat loss survey. That tells us how much heat the home needs, room by room so the system is sized to match. Sizing by rule of thumb isn’t good enough. If you’re dealing with moving away from fossil-fuel heating and questions about the Boiler Upgrade Scheme, we can help.
If your home in or near Kingsash is heated by oil, LPG or electric heaters with no mains gas, the Boiler Upgrade Scheme adds an extra £1,500 until March 2027 for an air source or ground source heat pump, on top of the £7,500.
Warranty on the equipment is the manufacturer’s own, on the manufacturer’s terms, and we explain those terms on your quote. Each brand sets its own conditions, so we go through them with you rather than leave you to find the small print.
- Location
- Kingsash (HP16)
- Wider area
- Buckinghamshire
- Approvals
- F-Gas certified, NICEIC approved, MCS
- Replies
- We reply the same working day
- Guide price
- £8,000–£16,000 (0% VAT on homes), before the grant
- Pricing
- Fixed-price quote after a site survey
- Telephone
- 07833 053749
- Page updated
- 30 October 2026
Safe owner checks
Some faults have simple causes you can check first: check the mode, the set temperature, the remote’s batteries and the breaker. If a breaker trips again after you reset it, leave it off and give us a ring on 07833 053749, or email if that’s easier.
Good habits make our visits easier, not unnecessary. Simple care keeps the air moving through the system, but the refrigerant circuit, the electrics and the parts you can’t see still need an engineer at the interval the manufacturer recommends.
Homes in Kingsash and heat pumps
About 31 miles out from central London, Kingsash is part of the South East area we work across. The Valuation Office Agency’s council tax figures date about 42% of homes in Kingsash and the neighbourhoods around it to the post-war years, 1945 to 1972, and the last census (2021) found about 69% of households in detached or semi-detached houses. For homes of that age, the survey checks the insulation, the radiators and the hot water setup. Houses usually have space for an outdoor unit and a hot water cylinder.
Older homes near Old Church of St John the Baptist may need extra checks for planning and heat loss before a heat pump is designed. With Cholesbury Manor House about 2.7 miles east, it’s worth asking whether your own home is listed before planning a heat pump.
Kingsash is about 5 miles north-west of Chesham, in Buckinghamshire. Across the HP16 area, we can help with air source heat pumps. Our area takes in 263 places across Buckinghamshire, from busy centres to quieter spots. London, roughly 31 miles off, has its own page on this site.
If your postcode is in HP16, we can take the job on. Places around Kingsash that are also on our list: Lee Gate (1 mile east), Wendover Dean (1 mile south-west), Hunt's Green (1 mile south-east), Wendover (2 miles north-west) and Great Missenden (3 miles south). We also work in nearby towns such as Aylesbury (7 miles north-west), High Wycombe (8 miles south), Chesham (5 miles south-east) and Marlow (12 miles south).
Near you in Kingsash
In Kingsash, that means homes and buildings near The Gate Public House and John Colet School. The nearest railway station is Wendover station, roughly 2 miles north-west of the centre. Nearby you will also find Trenchard Museum (2.4 miles north) and Chiltern Hospital (3.7 miles south). Green spaces nearby include Dancersend Nature Reserve and Haddington Hill.
What happens if it’s left?
For eligible off-gas homes on oil or LPG, an extra £1,500 is on offer until March 2027. For homes that qualify, that’s a reason to look into it now. A system that is left with a fault, or without a service, normally costs more to run.
Height, access and the distance between the indoor and outdoor units can all change the price. Each of those is built into the quote and give you a fixed price before we start.
Why people in Kingsash choose us
- A reply the same working day
- We work on all the leading brands
- F-Gas certified company
- NICEIC approved electrical contractors
Take a look at how installs are priced or how to check a contractor.
Places near Kingsash
Other services in Kingsash
For landlords and property managers
Records are where property maintenance often slips. Each visit produces a dated record, with F-Gas records wherever refrigerant work is involved, ready for a tenant, a buyer or an inspection.
Under the GB F-gas rules, responsibility for leak checks is shared between whoever operates the equipment and the engineers who work on it. Where a building is let or managed, the lease or contract should make clear who looks after the system, and we can work for either side.
How the visit works
Testing is the last part of the visit wherever the system can be switched on. Then we explain what was done and answer your questions, and anything that needs attention later is pointed out. The visit takes from a couple of days to around a week, depending on the system and how much of the heating changes. Seeing the property in photos first means the trip to Kingsash can be planned properly.
- You tell us about the home and what you want from a heat pump.
- We survey for heat loss and look at radiators, cylinder space and outdoor unit options.
- You get our view on the right type for the house, and on whether the Boiler Upgrade Scheme applies.
- Installation follows on the agreed dates.
- After commissioning, you get the MCS certificate and a handover.
Preparing for the visit
- Arrange for someone to be there to let us in
- Make sure we can reach the consumer unit or fuse board
- Clear the space around the indoor unit, or where it will go
Getting a quote
Photos are enough for some jobs; others need a visit first. Bigger systems, commercial sites and awkward pipe routes are normally surveyed on site. Either way, you get a fixed price before any work is booked.
Related advice
From one of our customers
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead