Hampshire · Heat pump installation

Hill Brow air source heat pumps

Air source heat pumps in Hill Brow from an F-Gas certified company, with warranty terms explained brand by brand. Enquiries answered the same working day.

  • Questions about where the outdoor unit can go
  • Planning and permitted development questions
  • Ageing boilers that will need replacing

Air source heat pumps in Hill Brow and nearby

About our air source heat pumps in Hill Brow

A heat pump takes heat from the outside air and moves it into your home, using electricity to drive the process. The technology is close to air conditioning, which is why we install both and the Energy Saving Trust notes that air-to-air heat pumps are sometimes referred to as air conditioning. The work covers air-to-water heat pumps, hot water cylinders and radiator systems, and people most often call us about a boiler that’s getting old and choosing between air-to-water and air-to-air.

Older and listed homes in villages like Hill Brow need extra care, and permitted development does not cover listed buildings, so consent comes first.

Some warranty terms depend on the system being serviced regularly by a qualified engineer. If that applies to your system, booking the service on time keeps the record straight, and every service is written up.

Where
Hill Brow (GU33)
Wider area
Hampshire
Typical price
£8,000–£16,000 before the grant, 0% VAT on homes
Credentials
NICEIC approved, F-Gas certified, MCS
Price
Fixed, in writing
Call
07833 053749
Updated
30 October 2026

How the visit works

Our engineers arrive at the time agreed with you and check the plan with you first. Floors and furniture near the work are covered with dust sheets, and the electrics are made safe before any panel comes off. The work itself takes a few days for most air-to-water installations, with air-to-air systems often quicker. A few photos help us make the most of a visit to Hill Brow.

  1. First, a chat about the property and your goals for the heating.
  2. A survey covers heat loss, radiators, hot water and where the outdoor unit could sit.
  3. We explain which type of heat pump suits the home and whether a grant could apply.
  4. Installation follows on the agreed dates.
  5. We commission it, complete the MCS certificate and show you how to use it.

Preparing for the visit

  • Make sure we can reach the consumer unit or fuse board
  • Make sure we can reach the outdoor unit, or where it will go
  • Clear a path to the units and the space around them

Get a fixed-price quote

Every quote shows the VAT clearly, with the rate that applies to your job. Homes, businesses and different kinds of work can be treated differently for VAT, so we confirm it on the quote. To get one, phone 07833 053749.

Ask for a quote

Read more

Honest limits

Air source heat pumps cannot fix everything, and we’d rather say so up front. It doesn’t solve:

  • Improving the building’s insulation
  • Planning decisions, which rest with the council
  • Gas boiler work, such as disconnecting the old boiler, which needs a Gas Safe registered engineer

If in doubt, phone us on 07833 053749, or email if that’s easier and we’ll say what we think before booking.

Parts of the system we cover

  • Air-to-air heat pumps
  • Air-to-water heat pumps
  • Homes heated by oil, LPG or gas
  • Hot water cylinders
  • Underfloor heating
  • Radiator systems

Leave it or put it right?

Radiators that are too small for a heat pump’s lower flow temperature leave rooms cool. Checking and upsizing them as part of the installation avoids that. A dirty or faulty system works harder and costs more to run.

Our prices page shows typical ranges, but your price depends on the job in front of us. For a fixed-price quote, call us on 07833 053749 or send an email, and we’ll talk you through it.

Why people in Hill Brow choose us

  • Covering London and the South East
  • A fixed price before any work starts
  • Checkatrade member
  • An F-Gas certified company, as the law requires

Take a look at our cost guide and our accreditations.

Hill Brow: your questions answered

Do you cover smaller places like Hill Brow?

Yes, smaller places are covered as well as towns. Send a few details and photos, and we reply the same working day.

Is Hill Brow in your area for air source heat pumps?

We do: Hill Brow falls inside our working area. To start, call 07833 053749 or write to us at info@aircondoctor.co.uk with a few photos.

Can I get the Boiler Upgrade Scheme grant?

Eligibility depends on the property and the scheme rules. The scheme gives £7,500 for eligible air-to-water or ground source systems, and £2,500 for air-to-air only under strict conditions, and we check before you commit.

Do you protect the property while you work?

We put dust sheets over floors and furniture near the work first, and we tidy up as we go. Before we leave, we clear up and run through the work with you.

Do you survey before quoting?

Yes. We always look before we price, either on a site survey or from photos and details for simple jobs. Then you get a fixed-price quote.

How long does a heat pump installation take?

A typical installation takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. The programme is planned to keep time without heating short, and we explain it in advance.

Is there a Boiler Upgrade Scheme grant for air-to-air?

There is a £2,500 grant for air-to-air, but only under strict conditions. It has to replace the fossil-fuel heating, meet the full heating demand, be fitted by an MCS certified installer, and be in a home.

Air source heat pumps around Hill Brow

About 47 miles out from central London, Hill Brow is part of the South East area we work across. The last census (2021) found about 71% of households in detached or semi-detached houses. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.

A heat loss calculation decides the size of heat pump your home needs.

Hill Brow is about 3 miles north-east of Petersfield, in Hampshire. We cover Hill Brow for air source heat pumps and across the rest of Hampshire. Across Hampshire, we cover 683 places, Hill Brow among them. We also work in Guildford, about 20 miles from Hill Brow.

Our nearest recent job to Hill Brow was on Petworth Road, Haslemere (GU27), about 8 miles north-east: installing a Mitsubishi Electric multi-split system serving the master bedroom, two further bedrooms and the basement games room.

Getting to Hill Brow is easy by the B2070. Whether you’re on London Road, Plantation Road and Malvern Road or anywhere close by, our engineers can take on the work. Other places close to Hill Brow include Durford Wood (1 mile west), Liss (1 mile north-west), West Liss (1 mile north-west), Rake (1 mile north-east) and The Mint (1 mile north). We also work in nearby towns such as Havant (13 miles south), Horndean (10 miles south-west), Alton (9 miles north-west) and Waterlooville (12 miles south-west).

Near you in Hill Brow

Around Hill Brow, our work takes us to homes and businesses near Whistle Stop pub, among other places. Hill Brow’s nearest station is Liss station, about 1.1 miles north-west of the centre. Other landmarks nearby include Bear Museum (3.4 miles south-west) and Petersfield Community Hospital (3.5 miles south-west). The countryside around Hill Brow includes Liss Riverside Railway Walk South and Wheatham Hill.

Map of Hill Brow © OpenStreetMap contributors

Do you need air source heat pumps in Hill Brow?

Extensions, renovations and loft conversions are a natural time to rethink the heating. Pipework, radiators and space for a cylinder are easier to plan while work is going on.

What we are most often called about:

  • Wanting to stop using oil, LPG or gas for heating
  • Deciding on the outdoor unit position
  • A boiler that’s getting old

Live in one of the older houses around Rake Mission Church? Expect the survey to look closely at heat loss and at the building’s planning status.

Questions to ask before booking

  • Whether testing, commissioning and paperwork are included
  • Whether the manufacturer’s warranty depends on regular servicing
  • Why the equipment they’re quoting suits the job

Our hiring checklist

A customer’s words

“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”

Sarah M., East Grinstead

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead