Essex · Heat pump installation
Heat pump installation in Great Canfield, Essex
Heat pump installation, for Great Canfield and the surrounding area. Call for a fixed-price quote; we reply the same working day.
- Moving away from fossil-fuel heating
- Choosing between air-to-water and air-to-air
- Planning and permitted development questions
How we handle air source heat pumps in Great Canfield
For an air-to-water heat pump, the price is £8,000–£16,000 (0% VAT on homes), before the grant. In England and Wales, the Boiler Upgrade Scheme offers a £7,500 grant towards an eligible air-to-water installation and the installer makes the application. Eligibility depends on the property, so we confirm it before anything is agreed. Typical jobs include comparing heat pump types and a boiler that’s getting old, across underfloor heating, air-to-water heat pumps and homes heated by oil, LPG or gas.
In a place like Great Canfield, some homes are listed, and permitted development doesn’t cover listed buildings, so consent comes first.
Warranty on the equipment is the manufacturer’s own, on the manufacturer’s terms, and we set them out on your quote. Terms differ from brand to brand, and we’re happy to talk you through them.
- Where
- Great Canfield (CM6)
- Wider area
- Essex
- Costs
- £8,000–£16,000 (0% VAT on homes), before the grant
- Credentials
- F-Gas certified, NICEIC approved, MCS
- Pricing
- A fixed price before any work starts
- Telephone
- 07833 053749
- Updated
- 30 October 2026
Your questions about air source heat pumps in Great Canfield
Is Great Canfield within the area you cover?
We do. Villages and hamlets get the same service as the bigger towns. We are based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Does the Boiler Upgrade Scheme cover homes in Great Canfield?
Great Canfield is covered, as the scheme runs across England and Wales. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. The installer applies, and we are MCS certified.
How much time does a heat pump install need?
A typical installation takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. The programme is planned to keep time without heating short, and we explain it in advance.
Is the equipment covered by a warranty?
It’s the manufacturer’s warranty, which varies by brand. For example, Daikin’s standard warranty on split air conditioning is 2 years and we explain the terms for your brand on the quote.
Are you F-Gas certified?
F-Gas company certification, NICEIC approval for electrical work and MCS certification for heat pumps, plus Checkatrade membership. Our engineers also hold the individual F-gas qualifications needed to work on refrigerant.
Do I need new radiators for a heat pump?
It varies from room to room. We check them all during the survey, so the quote covers any changes.
Does servicing affect my warranty?
It can, for some brands. Send us the make and model and we’ll tell you what the manufacturer expects, and book the service at the interval they recommend.
Places near Great Canfield
More services for Great Canfield
Honest limits
It’s worth knowing the limits before booking:
- Planning approval where permitted development does not apply
- Promising eligibility for the Boiler Upgrade Scheme
- Gas boiler work, such as disconnecting the old boiler, which needs a Gas Safe registered engineer
Not sure which it is? You can call us on 07833 053749 or drop us a line and we will tell you honestly.
Where we work
- Air-to-water heat pumps
- Hot water cylinders
- Air-to-air heat pumps
- Homes heated by oil, LPG or gas
- Radiator systems
- Underfloor heating
Air source heat pumps around Great Canfield
About 47% of homes in and around Great Canfield have been built since 2000, according to Valuation Office Agency council tax records, and about 73% of households live in detached or semi-detached houses, according to the last census (2021). Lower heat loss in recent homes often means a smaller heat pump and fewer radiator changes. Detached and semi-detached houses usually have room for the outdoor unit and a cylinder. The Great Canfield Conservation Area is within about a third of a mile of the centre of Great Canfield. There are 2 conservation areas within a mile of the centre of Great Canfield. Historic England lists about 39 buildings and structures within half a mile of the centre of Great Canfield, including Parish Church of St Mary (grade I). That affects heat pumps: listed buildings need consent, and conservation areas limit where the outdoor unit can go under permitted development. Where needed, we check with the local planning authority (typically Uttlesford council).
Period properties close to Parish Church of St Mary can suit a heat pump, though insulation and any heritage protection are checked first. If your home is listed, like Barrington Hall about 2.9 miles west, listed building consent comes before any heat pump work.
Great Canfield is about 3 miles south-west of Great Dunmow, in Essex. Homes and businesses alike in Great Canfield, our engineers can help with air source heat pumps. You’ll hear back from us the same working day and our emergency line runs 24/7. Our area takes in 644 places across Essex. There’s also a page for London, roughly 29 miles from Great Canfield.
Jobs in CM6 are looked at, quoted and booked the same way as anywhere else. From The Street and Canfield Road to the smaller roads in between, nowhere is left out. Nearby, we also cover air source heat pumps in High Roding (1 mile east), Roundbush Green (2 miles south), Keeres Green (2 miles south), High Easter (2 miles south-east) and Stagden Cross (3 miles south-east). Larger places within reach include Chelmsford (10 miles south-east), Braintree (11 miles east), Harlow (10 miles south-west) and Brentwood (14 miles south).
Local landmarks in Great Canfield
Typical jobs here are in properties near The Black Lion Public House and the streets around them. The nearest railway station is Stansted Airport station, about 4.5 miles north-west of the centre. Well-known places in the area include Little Easton Moat (3.8 miles north). For a walk, there’s Portingbury Hills.
Before you call an engineer
Some faults have simple causes you can check first: is the system in the right mode, is the set temperature sensible, are the remote’s batteries working and has the breaker tripped. If a breaker trips again after you reset it, leave it off and call 07833 053749 or use the quote form.
For air conditioning, cleaning the indoor unit’s filters is the main job owners can do where the manufacturer’s manual explains how. With the power off, they lift out, can be vacuumed or rinsed and must be fully dry before they go back. On a heat pump, the equivalent is keeping the outdoor unit clear and checking the controls.
How the visit works
On the day, we arrive at the time agreed with you and check the plan with you first. Dust sheets go down over floors and anything close to the work, and the electrics are made safe before any panel comes off. The work itself takes a few days on site, depending on the cylinder, the radiators and the pipework involved. Rural lanes and tight entrances are worth mentioning before a visit to Great Canfield.
- It starts with a conversation about the home, the existing heating and your plans.
- The survey measures heat loss room by room and looks at radiators, hot water and the best spot for the outdoor unit.
- A fixed-price quote follows, setting out the system, any grant that applies and the VAT.
- Fitting day: the outdoor unit is placed, the indoor side connected and the controls set up.
- We commission the heat pump, complete the MCS paperwork and talk you through the controls.
Getting ready for the visit
- Make sure we can reach the consumer unit or fuse board
- Name a contact who can meet us at the agreed time
- Find the manual or the paperwork for the system, if you have it
Get a fixed-price quote
Every quote starts with a look at the job, from a site survey or, where the job is straightforward, from pictures and measurements. Then you get a fixed price so you know the cost before we begin.
Related advice
Different systems, different jobs
Hot water cylinders
The cylinder size depends on how much hot water the household uses.
Air-to-water heat pumps
Air-to-water systems work at lower temperatures than boilers, which is why radiator sizing is part of the survey.
From one of our customers
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead